Vol. 7 No. 5 (2017): October, 2017

Assessing the Effects of Length, Slope and Distance between Piles on the Bearing Capacity of a Pile Group under Axial Loading in Granular Soil
A. Firoozfar, A. Rostami, H. Ghaderi, H. Zamani, A. Rostamkhani

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1894-1899 | October 2017 | https://doi.org/10.48084/etasr.1352
- Abstract
- PDF
Nanotechnological Developments in Structural Design: Load-Bearing Materials
Z. Y. Ilerisoy, Y. Takva

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1900-1903 | October 2017 | https://doi.org/10.48084/etasr.1414
- Abstract
- PDF
BIM and Lean Construction: The Evolution Obstacle in the Brazilian Civil Construction Industry
T. W. Alvarenga, E. N. da Silva, L. C. B. de Brito Mello

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1904-1908 | October 2017 | https://doi.org/10.48084/etasr.1278
- Abstract
- PDF
A Classification Study on the Development Stages of Construction Technologies in Turkey
H. I. Polat

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1909-1913 | October 2017 | https://doi.org/10.48084/etasr.1606
- Abstract
- PDF
Using Ecotech Architecture as an Effective Tool for Sustainability in Construction Industry
A. S. Mozhdegani, R. Afhami

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1914-1917 | October 2017 | https://doi.org/10.48084/etasr.1230
- Abstract
- PDF
Highly Compact Design of Trimmed Patch with Modified Partial Ground Structure for Extreme-Wideband Systems
H. Alsaif

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1918-1921 | October 2017 | https://doi.org/10.48084/etasr.1416
- Abstract
- PDF
Rectangular Strain-Rosette Method for Measuring the Mode I Stress-Intensity Factor KI and T-stress
A. Hamdi, N. Benseddiq, F. Mejni

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1922-1929 | October 2017 | https://doi.org/10.48084/etasr.1396
- Abstract
- PDF
Utilization of Construction Waste Tiles as a Replacement for Fine Aggregates in Concrete
A. A. Adekunle, K. R. Abimbola, A. O. Familusi

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1930-1933 | October 2017 | https://doi.org/10.48084/etasr.1071
- Abstract
- PDF
Optimal Resources Planning of Residential Complex Energy System in a Day-ahead Market Based on Invasive Weed Optimization Algorithm
P. Ahmadi, M. H. Nazari, S. H. Hosseinian

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1934-1939 | October 2017 | https://doi.org/10.48084/etasr.1324
- Abstract
- PDF
Study and Simulation of the Density of the Incident Solar Flux on the Walls of a Building in Adrar, Algeria
A. Oudrane, B. Aour, B. Zeghmati, X. Chesneau, H. Massaoud

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1940-1945 | October 2017 | https://doi.org/10.48084/etasr.1337
- Abstract
- PDF
Improving Power System Stability Using Transfer Function: A Comparative Analysis
G. Shahgholian, A. Fattollahi

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1946-1952 | October 2017 | https://doi.org/10.48084/etasr.1341
- Abstract
- PDF
A Novel Three Phase to Seven Phase Conversion Technique Using Transformer Winding Connections
M. Tabrez, P. K. Sadhu, A. Iqbal

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1953-1961 | October 2017 | https://doi.org/10.48084/etasr.1190
- Abstract
- PDF
A New Contribution in Reducing Electric Field Distribution Within/Around Medium Voltage Underground Cable Terminations
S. S. Desouky, A. Z. El-Dein, R. A. Abd El-Aal, N. A. A. El-Rahman

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1962-1966 | October 2017 | https://doi.org/10.48084/etasr.1357
- Abstract
- PDF
A Probabilistic Approach for the Evaluation of Fault Detection Schemes in Microgrids
R. Eslami, S. H. H. Sadeghi, H. Askarian Abyaneh

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1967-1973 | October 2017 | https://doi.org/10.48084/etasr.1472
- Abstract
- PDF
Real Time Speed Control of a DC Motor Based on its Integer and Non-Integer Models Using PWM Signal
A. W. Nasir, I. Kasireddy, A. K. Singh

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1974-1979 | October 2017 | https://doi.org/10.48084/etasr.1292
- Abstract
- PDF
Analysis and Fabrication of an Active Cooling System for Reducing Photovoltaic Module Temperature
A. Q. Jakhrani, A. R. Jatoi, S. H. Jakhrani

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1980-1986 | October 2017 | https://doi.org/10.48084/etasr.1185
- Abstract
- PDF
Considering FACTS in Optimal Transmission Expansion Planning
K. Soleimani, J. Mazloum

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1987-1995 | October 2017 | https://doi.org/10.48084/etasr.1358
- Abstract
- PDF
An Investigation of the Effect of Ventilation Inlet and Outlet Arrangement on Heat Concentration in a Ship Engine Room
E. Alizadeh, A. Maleki, Α. Mohamadi

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 1996-2004 | October 2017 | https://doi.org/10.48084/etasr.1288
- Abstract
- PDF
Gas Turbine Engine Starting Applicated on TV2-117 Turboshaft
R. M. Catana, G. Cican, G. Dediu

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2005-2009 | October 2017 | https://doi.org/10.48084/etasr.1315
- Abstract
- PDF
Rail-Route Planning Using a Geographical Information System (GIS)
S. Panchal, A. Debbarma

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2010-2013 | October 2017 | https://doi.org/10.48084/etasr.1329
- Abstract
- PDF
Hybrid Semantic Analysis of Tweets: A Case Study of Tweets on Girl-Child in India
M. Madhukar, S. Verma

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2014-2016 | October 2017 | https://doi.org/10.48084/etasr.1246
- Abstract
- PDF
Software In the Loop Simulation for Robot Manipulators
M. Ben Ayed, L. Zouari, M. Abid

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2017-2021 | October 2017 | https://doi.org/10.48084/etasr.1285
- Abstract
- PDF
FMFinder: A Functional Module Detector for PPI Networks
M. Modi, N. G. Jadeja, K. Zala

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2022-2025 | October 2017 | https://doi.org/10.48084/etasr.1347
- Abstract
- PDF
Design of a Mobile Agents Based Solution to Distributional Management of Computer Networks, Taking into Account the Security Mechanisms
S. Bahrami

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2026-2029 | October 2017 | https://doi.org/10.48084/etasr.829
- Abstract
- PDF
3D Centrifuge Modeling of the Effect of Twin Tunneling to an Existing Pile Group
M. A. Soomro, M. A. Keerio, M. A. Soomro, D. K. Bangwar

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2030-2040 | October 2017 | https://doi.org/10.48084/etasr.1393
- Abstract
- PDF
Numerical Simulation of a Single-Phase Flow Through Fractures with Permeable, Porous and Non-Ductile Walls
N. Pour Mahmoud, A. Zabihi

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2041-2046 | October 2017 | https://doi.org/10.48084/etasr.1448
- Abstract
- PDF
Modeling and Parameter Optimization for Surface Roughness and Residual Stress in Dry Turning Process
M. H. El-Axir, M. M. Elkhabeery, M. M. Okasha

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2047-2055 | October 2017 | https://doi.org/10.48084/etasr.1560
- Abstract
- PDF
Buckling Stability Assessment of Plates with Various Boundary Conditions Under Normal and Shear Stresses
F. Riahi, A. Behravesh, M. Yousefzadeh Fard, A. Armaghani

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2056-2061 | October 2017 | https://doi.org/10.48084/etasr.1516
- Abstract
- PDF
Representing IT Projects Risk Management Best Practices as a Metamodel
A. El Yamami, S. Ahriz, K. Mansouri, M. Qbadou, E. Illoussamen

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2062-2067 | October 2017 | https://doi.org/10.48084/etasr.1340
- Abstract
- PDF
Optimization of Emulsion Liquid Membrane for Lead Separation from Aqueous Solutions
E. Fouad, F. Ahmad, K. Abdelrahman

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2068-2072 | October 2017 | https://doi.org/10.48084/etasr.1390
- Abstract
- PDF
A Hybrid Meta-Learner Technique for Credit Scoring of Banks’ Customers
A. G. Armaki, M. F. Fallah, M. Alborzi, A. Mohammadzadeh

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2073-2082 | October 2017 | https://doi.org/10.48084/etasr.1361
- Abstract
- PDF
A Quantitative Measure For Evaluating Project Uncertainty Under Variation And Risk Effects
A. Chenarani, E. A. Druzhinin

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2083-2088 | October 2017 | https://doi.org/10.48084/etasr.1530
- Abstract
- PDF
Investigating Appropriate Financing Methods in Collaborative Projects of Water and Wastewater with AHP Approach
V. Vosoughi, H. D. Nasserabadi, A. Babaei

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2089-2093 | October 2017 | https://doi.org/10.48084/etasr.1400
- Abstract
- PDF
Potential Recovery of Silver (Ag) from X-ray Fixer Waste by Alkaline Treatment
V. R. K. R. Galarpe, G. D. Leopoldo

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2094-2097 | October 2017 | https://doi.org/10.48084/etasr.1526
- Abstract
- PDF

A Review of Works on Shaped Charges
M. Ahmed, A. Q. Malik

Engineering, Technology & Applied Science Research

Volume: 7 | Issue: 5 | Pages: 2098-2103 | October 2017 | https://doi.org/10.48084/etasr.1532
- Abstract
- PDF

Vol. 14 (2024)	Vol. 7 (2017)
Vol. 13 (2023)	Vol. 6 (2016)
Vol. 12 (2022)	Vol. 5 (2015)
Vol. 11 (2021)	Vol. 4 (2014)
Vol. 10 (2020)	Vol. 3 (2013)
Vol. 9 (2019)	Vol. 2 (2012)
Vol. 8 (2018)	Vol. 1 (2011)