# Optimum Shape Design of Metal-Enclosed 550 kV Disconnectors Based on Response Surface Method and Finite Element Analysis

## Authors

• R. Gong School of Electrical Engineering, Xi’an Jiaotong University, China
• S. Wang School of Electrical Engineering, Xi’an Jiaotong University, China
• X. Luo School of Electrical Engineering, Xi’an Jiaotong University, China
• M. Danikas Department of Electrical & Computer Engineering, Democritus University of Thrace, Greece
Volume: 5 | Issue: 4 | Pages: 818-824 | August 2015 | https://doi.org/10.48084/etasr.567

## Abstract

In this paper, the optimum shape design of 550 kV disconnectors in Gas Insulated Switchgears (GIS) are firstly presented employing the Finite Element Method (FEM) for electric field analysis coupled with an optimal design method. For effective analysis, the FEM is conducted in transient quasistatic electric field, using a finite element FORTRAN code. The structure parameters of disconnectors that provide the required electric field strength are obtained by the Response Surface Method (RSM) and the optimal values are presented by the variation in maximal electric field strength. The RSM and optimal design methods are also conducted by FORTRAN codes. The optimal result reveals that a uniform electric field distribution is achieved in 550 kV disconnectors. Additionally, the optimal result of disconnectors is verified by the proposed disconnector undertaken power frequency withstanding voltage of 740 kV for 1 minute, lightening impulse of 1675 kV, and operating impulse of 1300 kV, respectively.

## Keywords:

Disconnectors, response surface method, RSM, optimization, structure design, finite element method, FEM

## References

G. Zhang, Finite Element Method, Beijing, Mechanical Industry Press, 1991

J. Sheng, Numerical analysis of electromagnetic field. Xi’an, Xi’an Jiaotong University Press, 1991

Y. J. Kim, J. D. Lee, B. J. Lee, H. K. Shin, S. C. Hahn, “Design optimization of permanent magnetic actuator for vacuum circuit breaker by response surface method”, International Conference on Electrical Machines and Systems (ICEMS), pp. 1-4, Saporo, Japan, October 21-24, 2012

K. W. Jeon, T. K. Chung, S. C. Hahn, “NEMA class a slot shape optimization of induction motor for electric vehicle using response surface method”, International Conference on Electrical Machines and Systems (ICEMS), pp. 1-4, Beijing, China, August 20-23, 2011 DOI: https://doi.org/10.1109/ICEMS.2011.6073692

B. H. Lee, K. S. Kim, J. P. Hong, J. H. Lee, “Optimum shape design of single-sided linear induction motors using response surface methodology and finite-element method”, International Conference on Electrical Machines and Systems (ICEMS), pp. 1-5, Beijing, China, August 20-23, 2011 DOI: https://doi.org/10.1109/ICEMS.2011.6073769

L. Egiziano, V. Tucci, C. Petrarca, M. Vitelli, “A Galerkin model to study the field distribution in electrical components employing nonlinear stress grading materials”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 6, No. 6, pp. 765-773, 1999 DOI: https://doi.org/10.1109/94.822012

J. Kuang, J. D. Lavers, S. Boggs, “Program for transient nonlinear finite element analysis with applications to coupled field programs”, 10th International Symposium on High Voltage Engineering, Montreal Quebec, Canada, pp. 25-29, 1997

X. Ma, Electromagnetic theory and applications, Xi’an, Xi’an Jiaotong University Press, 2000

G. Lupo, G. Miano, V. Tucci, M. Vitelli. “Field distribution in cable terminations from a quasi-static approximation of the Maxwell equations”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 3, No. 3, pp. 399-409, 1996 DOI: https://doi.org/10.1109/94.506213

Z. Zhang, B. Xiaofeng, “Comparison about the three central composite designs with simulation. advanced computer control”, International Conference on Advanced Copmuter Control (ICACC), Singapore, pp. 163-167, January 22-24, 2009 DOI: https://doi.org/10.1109/ICACC.2009.48

C. Petrarca, L. Egiziano, V. Tucci, M. Vitelli “Impulse performances of cable terminations employing stress grading accessories”, 1999 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, Austin, USA, Vol. 1, pp. 146-149, October 17-20, 1999

B. Li, SF6 High Voltage Apparatus, Beijing, Mechanical Industry Press, 2008

## How to Cite

[1]
R. Gong, S. Wang, X. Luo, and M. Danikas, “Optimum Shape Design of Metal-Enclosed 550 kV Disconnectors Based on Response Surface Method and Finite Element Analysis”, Eng. Technol. Appl. Sci. Res., vol. 5, no. 4, pp. 818–824, Aug. 2015.

### Metrics

Abstract Views: 593

Metrics Information

• ## UHF PD Experiments on Real Power Transformer and its Frequency Characteristics Results

H. Fan, J. Hu, H. Liu, Y. Yin, M. Danikas
Engineering, Technology & Applied Science Research
Volume: 6 | Issue: 1 | Pages: 906-912 | February 2016 | https://doi.org/10.48084/etasr.608
• ## Propagation of Electrical Trees under the Influence of Mechanical Stresses: A Short Review

M. Danikas, D. Papadopoulos, S. Morsalin
Engineering, Technology & Applied Science Research
Volume: 9 | Issue: 1 | Pages: 3750-3756 | February 2019 | https://doi.org/10.48084/etasr.2483
• ## Study of the Behavior of Water Droplets Under the Influence of a Uniform Electric Field on Conventional Polyethylene and on Crosslinked Polyethylene (XLPE) with MgO Nanoparticles Samples

C. Charalambous, M. Danikas, Y. Yin, N. Vordos, J. W. Nolan, A. Mitropoulos
Engineering, Technology & Applied Science Research
Volume: 7 | Issue: 1 | Pages: 1323-1328 | February 2017 | https://doi.org/10.48084/etasr.813
• ## Insulating Materials at Very Low Temperatures: A Short Review

P. Malelis, M. Danikas
Engineering, Technology & Applied Science Research
• ## Partial Discharges in Cavities and their Connection with Dipoles, Space Charges, and Some Phenomena Below Inception Voltage

G. E. Vardakis, M. Danikas, A. Nterekas
Engineering, Technology & Applied Science Research
Volume: 10 | Issue: 4 | Pages: 5869-5874 | August 2020 | https://doi.org/10.48084/etasr.3593
• ## Electrical Trees in a Composite Insulating System Consisted of Epoxy Resin and Mica: The Case of Multiple Mica Sheets For Machine Insulation

V. A. Kioussis, M. Danikas, D. D. Christantoni, G. E. Vardakis, Α. Bairaktari
Engineering, Technology & Applied Science Research
Volume: 4 | Issue: 4 | Pages: 662-668 | August 2014 | https://doi.org/10.48084/etasr.468
• ## Study of The Phenomena of Surface Discharges and Flashover in Nanocomposite Epoxy Resin under the Influence of Homogeneous Electric Fields

M. Danikas, D. Verginadis, R. Sarathi
Engineering, Technology & Applied Science Research
Volume: 9 | Issue: 4 | Pages: 4315-4321 | August 2019 | https://doi.org/10.48084/etasr.2696
• ## Behaviour of Water Droplets Under the Influence of a Uniform Electric Field in Nanocomposite Samples of Epoxy Resin/TiO2

Α. Bairaktari, M. Danikas, X. Zhao, Y. Cheng, Y. Zhang
Engineering, Technology & Applied Science Research
Volume: 3 | Issue: 5 | Pages: 511-515 | October 2013 | https://doi.org/10.48084/etasr.373
• ## Surface Discharges and Flashover Voltages in Nanocomposite XLPE Samples

C. Papadakis, Y. Yin, M. Danikas, C. Charalambous
Engineering, Technology & Applied Science Research
Volume: 8 | Issue: 6 | Pages: 3502-3504 | December 2018 | https://doi.org/10.48084/etasr.2186
• ## Foreign Inclusions, Enclosed Cavities, Partial Discharge Models and Discharge Energy: A Short Review Regarding Solid Dielectrics and Composite Insulating Systems

M. Danikas, S. Morsalin
Engineering, Technology & Applied Science Research
Volume: 9 | Issue: 5 | Pages: 4659-4666 | October 2019 | https://doi.org/10.48084/etasr.2958