Controlling the Defects of Paint Shop using Seven Quality Control Tools in an Automotive Factory

Authors

  • I. A. Memon Department of Mechanical Engineering, Quaid-e-Awam University of Engineering, Science and Technology, Pakistan
  • A. Ali Department of Electrical Engineering, Sukkur IBA University, Pakistan
  • M. A. Memon Department of Electrical Engineering, Quaid-e-Awam University of Engineering, Science and Technology, Pakistan
  • U. A. Rajput Department of Mechanical Engineering, Quaid-e-Awam University of Engineering, Science and Technology, Pakistan
  • S. A. K. Abro Department of Electrical Engineering, Sukkur IBA University, Pakistan
  • A. A. Memon Department of Electrical Engineering, Quaid-e-Awam University of Engineering, Science and Technology, Pakistan
Volume: 9 | Issue: 6 | Pages: 5062-5065 | December 2019 | https://doi.org/10.48084/etasr.3160

Abstract

Seven quality control (7QC) tools are used for reducing defects during manufacturing. These tools are highly effective in productivity and quality improvement. In this case, the study of the 7QC tools was applied in an automotive factory in order to reduce paint shop defects. Within four months the production line was inspected, defects were categorized and the 7QC tools were successfully applied, reducing the overall defect rate by 70%. Although every tool was important, the cause and effect diagram was responsible for finding the root causes of the defects.

Keywords:

defects reduction, productivity improvement, paint shop, 7QC tools

Downloads

Download data is not yet available.

References

J. C. Benneyan, “The design, selection, and performance of statistical control charts for healthcare process improvement”. International Journal of Six Sigma and Competitive Advantage, Vol. 4, No. 3, p. 209-239, 2008 DOI: https://doi.org/10.1504/IJSSCA.2008.021837

P. Kuendee, “Application of 7 quality control (7 QC) tools for quality management: A case study of a liquid chemical warehousing”, 4th International Conference on Industrial Engineering and Applications, Nagoya, Japan, April 21-23, 2017 DOI: https://doi.org/10.1109/IEA.2017.7939188

H. Hailu, H. Tabuchi, H. Ezawa, K. Jilcha, “Reduction of excessive trimming and reject leather by integration of 7 QC tools and QC story formula: The case report of Sheba Leather PLC”, Industrial Engineering & Management, Vol. 6, No. 3, 2017

B. Neyestani, “Seven basic tools of quality control: The appropriate techniques for solving quality problems in the organizations”, 2017 DOI: https://doi.org/10.2139/ssrn.2955721

N. Visveshwar, V. Vishal, V. Venkatesh, R. V. Samsingh, P. Karthik, “Application of quality tools in a plastic based production industry to achieve the continuous improvement cycle”, Calitatea, Vol. 18, No. 157, pp. 61-64, 2017

P. S. Parmar, T. N. Desai, “Reduction of rework cost in manufacturing industry using statistical process control techniques: a case study”, Industrial Engineering Journal, Vol. 10, No. 6, pp. 40-46, 2017 DOI: https://doi.org/10.26488/IEJ.10.6.46

A. Jaware, K. Bhandare, G. Sonawane, S. Bhagat, R. Ralebhat, “Reduction of machining rejection of shift fork by using seven quality tools”, International Journal of Engineering and Technology, Vol. 5, No. 4, pp. 4323-4334, 2018

S. M. Ahmed, R. T. Aoieong, S. L. Tang, D. X. Zheng, “A comparison of quality management systems in the construction industries of Hong Kong and the USA”, International Journal of Quality & Reliability Management, Vol. 22, No. 2, pp. 149–161, 2005 DOI: https://doi.org/10.1108/02656710510577215

D. R. Prajapati, “Implementation of SPC techniques in automotive industry : a case study”, International Journal of Emerging Technology and Advanced Engineering, Vol. 2, No. 3, pp. 227-241, 2012

T. V. U. K. Kumar, “SPC tools in automobile component to analyze inspection process”, Vol. 2, No. 1, pp. 624–630, 2013

C. Fotopoulos, E. Psomas, “The use of quality management tools and techniques in ISO 9001:2000 certified companies: The Greek case”, International Journal of Productivity and Performance Management, Vol. 58, No. 6, pp. 564–580, 2009 DOI: https://doi.org/10.1108/17410400910977091

R. H. Fouad, A. Mukattash, “Statistical process control tools : a practical guide for Jordanian Industrial Organizations”, Vol. 4, No. 6, pp. 693–700, 2010

R. Srinivasu, G. S. Reddy, S. R. Rikkula, “Utility of quality control tools and statistical process control to improve the productivity and quality in an industry”, International Journal of Reviews in Computing, Vol. 5, pp. 15-20, 2011

T. M. Young, B. H. Bond, J. Wiedenbeck, “Implementation of a real-time statistical process control system in hardwood sawmills”, Forest Products Journal, Vol. 57, No. 9, pp. 54–62, 2007

N. Afzaal, A. Aftab, S. Khan, M. Najamuddin, “To analyze the use of statistical tools for cost effectiveness and quality of products”, IOSR Journal of Humanities and Social Science, Vol. 20, No. 1, pp. 47–57, 2015

G. Paliska, D. Pavletic, M. Sokovic, “Quality tools: systematic use in process industry”, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 25, No. 1, pp. 79–82, 2007

M. Sokovic, J. Jovanovic, J. Krivokapic, A. Vujovic, “Basic quality tools in continuous improvement process”, Journal of Mechanical Engineering, Vol. 55, No. 5 pp. 333-341, 2009

G. Patidar, D. D. S. Verma, “Implimantation of statistical process control in small scale industries- a review”, International Journal of Technologies and Engineering, Vol. 2, No. 7, pp. 121-124, 2015

V. Parkash, D. Kumar, R. Rajoria, “Statistical process control”, International Journal of Research in Engineering and Technology, Vol. 2, No. 8, pp. 70–72, 2013 DOI: https://doi.org/10.15623/ijret.2013.0208010

P. S. Parmar, V. A. Deshpande, “Implementation of statistical process control techniques in industry : a review”, Journal of Emerging Technologies and Innovative Research, Vol. 1, No. 6, pp. 583–587, 2014

J. V. Koleske, “Mechanical properties of solid coatings”, in: Encyclopedia of Analytical Chemistry: Applications, Theory and Instrumentation, John Wiley and Sons, 2006 DOI: https://doi.org/10.1002/9780470027318.a0608

A. E. Bryson, The control of quality in the manufacture of paint, PhD Thesis, Masachusetts Institute of Technology, 1950

P. Bhangale, R. Dhake, G. Gambhire, “Reduction in defects of car body panel using 7QC tools approach”, National Conference on Modelling, Optimization and Control, Pune, India, March 4-6, 2015

I. A. Memon, Q. B. Jamali, A. S. Jamali, M. K. Abbasi, N. A. Jamali, Z. H. Jamali, “Defect reduction with the use of seven quality control tools for productivity improvement at an automobile company”, Engineering, Technology and Applied Science Research, Vol. 9, No. 2, pp. 4044–4047, 2019 DOI: https://doi.org/10.48084/etasr.2634

M. L. Chew Hernandez, L. Viveros Rosas, R. F. Retes Mantilla, G. Espinosa Martínez, V. Velazquez Romero, “Supply chain cooperation by agreed reduction of behavior variability: a simulation-based study”, Engineering, Technology and Applied Science Research, Vol. 7, No. 2, pp. 1546–1551, 2016 DOI: https://doi.org/10.48084/etasr.1039

Downloads

How to Cite

[1]
Memon, I.A., Ali, A., Memon, M.A., Rajput, U.A., Abro, S.A.K. and Memon, A.A. 2019. Controlling the Defects of Paint Shop using Seven Quality Control Tools in an Automotive Factory. Engineering, Technology & Applied Science Research. 9, 6 (Dec. 2019), 5062–5065. DOI:https://doi.org/10.48084/etasr.3160.

Metrics

Abstract Views: 3023
PDF Downloads: 1172

Metrics Information

Most read articles by the same author(s)

<< < 1 2 3 > >>