Behavior of GFRP Reinforced-Concrete Bubbled One-Way Slabs by Encased Composite Steel I-Sections
Received: 13 June 2024 | Revised: 23 July 2024 | Accepted: 3 August 2024 | Online: 9 October 2024
Corresponding author: Mohannad Abdulkhaliq
Abstract
Bubbled Reinforced Concrete (RC) slabs have gained popularity in recent years as a practical construction method that eliminates unnecessary concrete in the center, thereby reducing the dead weight of the structure. This study provides a systematic framework to compare the performance and capabilities of one-way bubbled concrete slabs reinforced with Glass Fiber Reinforced Polymer (GFRP) bars and embedded steel I-sections. Four one-way concrete slabs, each with a length of 2,600 mm and a rectangular cross-sectional area of 600 mm in width and 150 mm in depth were employed. These slabs were reinforced with Glass Reinforced Plastics (GRP) rebar at the same reinforcement ratio and tested by two-point bending to failure. Different parameters such as specimen type (solid or bubbled slabs) and internal reinforcement were achieved using steel I-sections in two different shapes (2 and 4 pcs of steel I-sections), where 4I-section shape with a cross-sectional area equivalent to 2I-section shape, channel shear connectors, and bent steel bars (10 mm diameter) were used to improve the shear resistance. The results showed that bubbled slabs experienced a higher range of deformations (including deflection, strains, and cracks) by about (28%-88%) and a 15% decrease in ultimate load capacity compared to solid slabs. On the other hand, the use of steel I-sections as internal reinforcement significantly improved the specimen performance compared to unreinforced slabs (Steel Slab (SS) and Bubbled Slab (BS), respectively). Deflection was reduced by approximately 52% and 87% at the same load level, ultimate load capacity increased by approximately 121% and 179%, and flexural stiffness increased by approximately 197% and 272% at the same load level.
Keywords:
embedded steel I-sections, bubbled slabs, flexural strength, one-way slabs, spherical voids, internal strengthening, deflection, Glass Fiber-Reinforced Polymer (GFRP) barsDownloads
References
A. S. Mahdi and S. D. Mohammed, "Structural Behavior of BubbleDeck Slab under Uniformly Distributed Load," Civil Engineering Journal, vol. 7, no. 2, pp. 304–319, Feb. 2021.
A. H. A. Al-Ahmed, "Nonlinear Behavior of Self -Compacting Reinforced Concrete Two-Way Slabs with Central Square Opening under Uniformly Distributed Loads," Journal of Engineering, vol. 22, no. 7, pp. 35–54, 2016.
A. S. Mahdi and S. D. Mohammed, "Experimental and Numerical Analysis of Bubbles Distribution Influence in BubbleDeck Slab under Harmonic Load Effect," Engineering, Technology & Applied Science Research, vol. 11, no. 1, pp. 6645–6649, Feb. 2021.
B. G. Bhade and S. M. Barelikar, "An experimental study on two-way bubble deck slab with spherical hollow balls," International Journal of Recent Scientific Research, vol. 7, no. 6, pp. 11621–11626, Jun. 2016.
A. Gul et al., "Experimental Study on the Structural Behavior of Cast in-situ Hollow Core Concrete Slabs," Civil Engineering Journal, vol. 6, no. 10, pp. 1983–1991, Oct. 2020.
N. Oukaili and H. H. Yasseen, "Experimental Investigations on the Strength and Serviceability of Biaxial Hollow Concrete Slabs," Journal of Engineering, vol. 22, no. 11, pp. 36–54, Nov. 2016.
C. C. Marais, "Design adjustment factors and the economical application of concrete flat-slabs with internal spherical voids in South Africa," Dissertation, University of Pretoria, 2010.
N. Oukaili, H. Merie, A. Allawi, and G. Wardeh, "Reduced Volume Approach to Evaluate Biaxial Bubbled Slabs’ Resistance to Punching Shear," Buildings, vol. 14, no. 3, Mar. 2024, Art. nο. 676.
"Bubble Deck - Lighter Flat Slab Technology." https://www.bubbledeck-uk.com/.
D. H. Al-Rashedi and A. H. A. Al-Ahmed, "Two-Way Bubbled Slabs Strengthened by Prestressing Strands," IOP Conference Series: Materials Science and Engineering, vol. 901, no. 1, Aug. 2020, Art. no. 012011.
A. V. Joseph, "Structural Behaviour of Bubble Deck Slab," M.Tech Thesis, St. Joseph’s College of Engineering & Technology, Palai, 2016.
T. Lai, "Structural Behavior of BubbleDeck* Slabs And Their Application to Lightweight Bridge Decks," Ph.D. dissertation, Massachusetts Institute of Technology, 2011.
S. Calin and C. Asăvoaie, "Method for Bubbledeck Concrete Slab with Gaps," Bulletin of the Polytechnic Institute of Jassy, vol. 55, no. 59, pp. 63–70, Jan. 2009.
V. Abishek and G. R. Iyappan, "Study on Flexural Behavior of Bubble Deck Slab Strengthened with FRP," Journal of Physics: Conference Series, vol. 2040, no. 1, Oct. 2021, Art. no. 012018.
A. H. A. Al-Ahmed, F. H. Ibrahim, A. A. Allawi, and A. El-Zohairy, "Behavior of One-Way Reinforced Concrete Slabs with Polystyrene Embedded Arched Blocks," Buildings, vol. 12, no. 3, Mar. 2022, Art. no. 331.
BubbleDeck Voided Flat Slab Solutions. Jersey, UK: BubbleDeck, 2008.
M. Abas Golham and A. H. A. Al-Ahmed, "Behavior of GFRP reinforced concrete slabs with openings strengthened by CFRP strips," Results in Engineering, vol. 18, Jun. 2023, Art. no. 101033.
A. Wiater and T. Siwowski, "Serviceability and ultimate behaviour of GFRP reinforced lightweight concrete slabs: Experimental test versus code prediction," Composite Structures, vol. 239, May 2020, Art. no. 112020.
Y. Zheng, C. Li, and G. Yu, "Investigation of structural behaviours of laterally restrained GFRP reinforced concrete slabs," Composites Part B: Engineering, vol. 43, no. 3, pp. 1586–1597, Apr. 2012.
A. Veljkovic, V. Carvelli, and M. Rezazadeh, "Modelling the bond in GFRP bar reinforced concrete thin structural members," Structures, vol. 24, pp. 13–26, Apr. 2020.
M. Zahid and S. Al-Zaidee, "Validated Finite Element Modeling of Lightweight Concrete Floors Stiffened and Strengthened with FRP," Engineering, Technology & Applied Science Research, vol. 13, no. 4, pp. 11387–11392, Aug. 2023.
W. Li, W. Huang, Y. Fang, K. Zhang, Z. Liu, and Z. Kong, "Experimental and theoretical analysis on shear behavior of RC beams reinforced with GFRP stirrups," Structures, vol. 46, pp. 1753–1763, Dec. 2022.
H. M. Mahdi and R. M. Abbas, "Torsional Behavior of CFRP Strengthening of SCC Box Beams with Web Openings under Repeated Loading," Civil Engineering Journal, vol. 9, no. 12, pp. 3038–3059, Dec. 2023.
M. A. Adam, A. M. Erfan, F. A. Habib, and T. A. El-Sayed, "Structural Behavior of High-Strength Concrete Slabs Reinforced with GFRP Bars," Polymers, vol. 13, no. 17, Sep. 2021, Art. no. 2997.
H. A. Hasan, H. Karim, H. A. Goaiz, A. M. Cabe, M. N. Sheikh, and M. N. S. Hadi, "Performance evaluation of normal- and high-strength concrete column specimens reinforced longitudinally with different ratios of GFRP bars," Structures, vol. 47, pp. 1428–1440, Jan. 2023.
S. A. Mohammed and A. I. Said, "Analysis of concrete beams reinforced by GFRP bars with varying parameters," Journal of the Mechanical Behavior of Materials, vol. 31, no. 1, pp. 767–774, Jan. 2022.
O. Abbas, "Evaluation of Deflection in High Strength Concrete (HSC) I-Beam Reinforced with Carbon Fiber Reinforced Polymer (CFRP) Bars," in 7th Asia Pacific Young Researches and Graduates Symposium, Kuala Lumpur, Malaysia, Aug. 2015, vol. 16, pp. 519–533
A. R. Murthy, D. M. Pukazhendhi, S. Vishnuvardhan, M. Saravanan, and P. Gandhi, "Performance of concrete beams reinforced with GFRP bars under monotonic loading," Structures, vol. 27, pp. 1274–1288, Oct. 2020.
S. I. Ali and A. A. Allawi, "Effect of Web Stiffeners on The Flexural Behavior of Composite GFRP- Concrete Beam Under Impact Load," Journal of Engineering, vol. 27, no. 3, pp. 76–92, Feb. 2021.
A. Waleed and A. Al-Zuhairi, "Strengthening of RC Beam with Large Square Opening Using CFRP," University of Baghdad Engineering Journal, vol. 26, Nov. 2020, Art. no. 134.
M. Y. Alabdulhady, M. F. Ojaimi, and A. H. Chkheiwer, "The efficiency of CFRP strengthening and repair system on the flexural behavior of RC beams constructed with different concrete compressive strength," Results in Engineering, vol. 16, Dec. 2022, Art. no. 100763.
T. H. Ibrahim, I. A. S. Alshaarbaf, A. A. Allawi, N. K. Oukaili, A. El-Zohairy, and A. I. Said, "Theoretical Analysis of Composite RC Beams with Pultruded GFRP Beams subjected to Impact Loading," Engineering, Technology & Applied Science Research, vol. 13, no. 6, pp. 12097–12107, Dec. 2023.
M. A. Issa, A. A. Allawi, and N. Oukaili, "Performance of doubly reinforced concrete beams with GFRP bars," Journal of the Mechanical Behavior of Materials, vol. 33, no. 1, Jan. 2024.
F. H. Ibrahim and A. A. H. Al-Ahmed, “Strengthening of Cracked One-Way Reinforced Concrete Bubbled Slabs using External Strands,” Design Engineering, no. 3, pp. 60–78, Mar. 2021.
M. Reshma and P. Binu, "CFRP Strips on Punching Shear Strength Development of Bubble Deck Slab," International Journal of Advanced Research Trends in Engineering and Technology (IJARTET), vol. 2, no. 9, Sep. 2015.
M. Reshma and P. Binu, "Punching Shear Strength Development of Bubble deck Slab Using GFRP Stirrups," IOSR Journal of Mechanical and Civil Engineering, pp. 01–06, 2016.
J. Jamal and V. Vijayan, "A Study on Strengthening of Bubble Deck Slab With Elliptical Balls by Using GFRP Sheets," International Journal for Scientific Research and Development, Apr. 2018, https://doi.org/10.2139/ssrn.3591289.
W. A. Waryosh and H. H. Hashim, "Rehabilitation of Fire Damage Reinforced Concrete Bubbled Slabs," Journal of Global Scientific Research, vol. 1, pp. 278–288, Jan. 2020.
S. S. Aman, B. S. Mohammed, M. A. Wahab, and A. Anwar, "Performance of Reinforced Concrete Slab with Opening Strengthened Using CFRP," Fibers, vol. 8, no. 4, Apr. 2020, Art. no. 25.
BubbleDeck Tests and Reports Summary. Jersey, UK: BubbleDeck, 2006.
W. D. Salman, "Flexural behavior of bubbled reinforced concrete slabs," PhD Thesis, University of Baghdad, 2012.
T. Siwowski and A. Wiater, "Lightweight concrete bridge deck slabs reinforced with GFRP composite bars," Roads and Bridges - Drogi i Mosty, vol. 16, pp. 285–299, Jan. 2018.
S. Al-Tersawy and M. A. Ghanem, "Ductility and Flexural Behavior of One Way Concrete Slabs Reinforced With Local Gfrp Rebars: an Experimental and Analytical Study," ERJ. Engineering Research Journal, vol. 37, no. 1, pp. 95–106, Jan. 2014.
A. Khavaran, "Effect of High-Strength Concrete on One-Way Shear Behavior of Concrete Slabs Reinforced with GFRP Bars," Jul. 2019, http://doi.org/10.13140/RG.2.2.14445.41445.
O. El Zaroug, J. Forth, J. Ye, and A. Beeby, "Flexural Performance of Concrete Slabs Reinforced With Gfrp and Subjected To Different Thermal Histories," in 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, Patras, Greece, Jan. 2007.
ACI Committee 440, Guide for the Design and Construction of Structural Concrete Reinforced with Fiber-Reinforced Polymer Bars. ACI, 2021.
A. A. Al-Azzawi and S. H. Mtashar, "Behavior of two-way reinforced concrete voided slabs enhanced by steel fibers and GFRP sheets under repeated loading," Results in Engineering, vol. 17, Mar. 2023, Art. no. 100872.
Downloads
How to Cite
License
Copyright (c) 2024 Mohannad Abdulkhaliq, Ali Hussein Al-Ahmed
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.