Design, Modeling, and Control of a Brushless Permanent Magnet Motor for Electric Vehicles
Received: 7 November 2023 | Revised: 18 November 2023 | Accepted: 20 November 2023 | Online: 2 December 2023
Corresponding author: Mohamed Arbi Khlifi
Abstract
Electric Vehicles (EVs) are becoming more and more common. In addition to their ecological advantages, EVs have demonstrated their efficiency in curtailing travel expenses by transitioning from gasoline to electricity, which is significantly less costly. This study proposes a Brushless Permanent Magnet Motor (BPMM) design for EVs, models the influence of average and ripple torque, and evaluates its efficiency compared to other designs. The validity of the proposed design was supported by simulation results.
Keywords:
brushless permanent magnet motor, electric vehicle (EV), control analysis, EV design, PI controllerDownloads
References
D. Q. Nguyen, L. D. Hai, D. B. Minh, and V. D. Quoc, "Analysis of Electromagnetic Parameters of Hybrid Externally Excited Synchronous Motors for Electric Vehicle Applications," Engineering, Technology & Applied Science Research, vol. 13, no. 3, pp. 10670–10674, Jun. 2023. DOI: https://doi.org/10.48084/etasr.5824
M. Slimene, "Energy-Efficient Self-Excited Brushless DC Motor for Refrigeration Systems," Prezglad Elektrotechniczny, vol. 1, no. 10, pp. 75–78, Oct. 2023. DOI: https://doi.org/10.15199/48.2023.10.14
Y. Kassem, H. Gokcekus, and A. Aljatlawe, "Utilization of Solar Energy for Electric Vehicle Charging and the Energy Consumption of Residential Buildings in Northern Cyprus: A Case Study," Engineering, Technology & Applied Science Research, vol. 13, no. 5, pp. 11598–11607, Oct. 2023. DOI: https://doi.org/10.48084/etasr.6142
M. A. Khlifi and M. B. Slimene, "Efficiency of a Six-Phase Induction Generator Employing a Static Excitation Controller to Generate AC Power for Wind Energy," IEEE Access, vol. 11, pp. 28791–28799, 2023. DOI: https://doi.org/10.1109/ACCESS.2023.3260775
V. K. B. Ponnam and K. Swarnasri, "Multi-Objective Optimal Allocation of Electric Vehicle Charging Stations and Distributed Generators in Radial Distribution Systems using Metaheuristic Optimization Algorithms," Engineering, Technology & Applied Science Research, vol. 10, no. 3, pp. 5837–5844, Jun. 2020. DOI: https://doi.org/10.48084/etasr.3517
M. Ben Slimene and M. A. Khlifi, "Investigation on the Effects of Magnetic Saturation in Six-Phase Induction Machines with and without Cross Saturation of the Main Flux Path," Energies, vol. 15, no. 24, Jan. 2022, Art. no. 9412. DOI: https://doi.org/10.3390/en15249412
P. T. Giang, V. T. Ha, and V. H. Phuong, "Drive Control of a Permanent Magnet Synchronous Motor Fed by a Multi-level Inverter for Electric Vehicle Application," Engineering, Technology & Applied Science Research, vol. 12, no. 3, pp. 8658–8666, Jun. 2022. DOI: https://doi.org/10.48084/etasr.4935
M. A. Khlifi, "Explaining the d-q Magnetic Couplings Theoretically in Saturated Smooth Air-Gap AC Machines," Engineering, Technology & Applied Science Research, vol. 9, no. 1, pp. 3739–3743, Feb. 2019. DOI: https://doi.org/10.48084/etasr.2327
D. B. Minh, N. H. Phuong, V. D. Quoc, and H. B. Duc, "Electromagnetic and Thermal Analysis of Interior Permanent Magnet Motors Using Filled Slots and Hairpin Windings," Engineering, Technology & Applied Science Research, vol. 12, no. 1, pp. 8164–8167, Feb. 2022. DOI: https://doi.org/10.48084/etasr.4683
M. B. Slimene and M. A. Khlifi, "Performance Limits of Three-Phase Self-Excited Induction Generator (SEIG) as a Stand Alone DER," Journal of Electrical Engineering and Technology, vol. 12, no. 1, pp. 145–150, 2017. DOI: https://doi.org/10.5370/JEET.2017.12.1.145
A. Khadhraoui, T. Selmi, and A. Cherif, "Energy Management of a Hybrid Electric Vehicle," Engineering, Technology & Applied Science Research, vol. 12, no. 4, pp. 8916–8921, Aug. 2022. DOI: https://doi.org/10.48084/etasr.5058
M. Slimene, "Solar based Air Conditioner with Standalone BLDC, Charger Controller and Battery Backup for Improved Efficiency," Prezglad Elektrotechniczny, vol. 1, no. 9, pp. 143–146, Sep. 2023. DOI: https://doi.org/10.15199/48.2023.09.26
M. A. Khlifi and H. Rehaoulia, "General modeling of saturated AC machines for industrial drives," COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 35, no. 1, pp. 44–63, Jan. 2016. DOI: https://doi.org/10.1108/COMPEL-12-2014-0346
H. Aygun and M. Aktas, "A Novel DTC Method with Efficiency Improvement of IM for EV Applications," Engineering, Technology & Applied Science Research, vol. 8, no. 5, pp. 3456–3462, Oct. 2018. DOI: https://doi.org/10.48084/etasr.2312
W. Li, T. W. Ching, and K. T. Chau, "Design and analysis of a new parallel-hybrid-excited linear vernier machine for oceanic wave power generation," Applied Energy, vol. 208, pp. 878–888, Dec. 2017. DOI: https://doi.org/10.1016/j.apenergy.2017.09.061
M. B. Slimene, M. A. Khlifi, M. B. Fredj, and H. Rehaoulia, "Modeling of a Dual Stator Induction Generator with and Without Cross Magnetic Saturation," Journal of Magnetics, vol. 20, no. 3, pp. 284–289, 2015. DOI: https://doi.org/10.4283/JMAG.2015.20.3.284
T. Ding, N. Takorabet, F.-M. Sargos, and X. Wang, "Design and Analysis of Different Line-Start PM Synchronous Motors for Oil-Pump Applications," IEEE Transactions on Magnetics, vol. 45, no. 3, pp. 1816–1819, Mar. 2009. DOI: https://doi.org/10.1109/TMAG.2009.2012772
K. Jyotheeswara Reddy and S. Natarajan, "Energy sources and multi-input DC-DC converters used in hybrid electric vehicle applications – A review," International Journal of Hydrogen Energy, vol. 43, no. 36, pp. 17387–17408, Sep. 2018. DOI: https://doi.org/10.1016/j.ijhydene.2018.07.076
M. Ben Slimene, M. A. Khlifi, M. Ben Fredj, and H. Rehaoulia, "Analysis of Saturated Self-Excited Dual Stator Induction Generator for Wind Energy Generation," Journal of Circuits, Systems and Computers, vol. 24, no. 09, Oct. 2015, Art. no. 1550129. DOI: https://doi.org/10.1142/S0218126615501297
X. Liu, K. Reddi, A. Elgowainy, H. Lohse-Busch, M. Wang, and N. Rustagi, "Comparison of well-to-wheels energy use and emissions of a hydrogen fuel cell electric vehicle relative to a conventional gasoline-powered internal combustion engine vehicle," International Journal of Hydrogen Energy, vol. 45, no. 1, pp. 972–983, Jan. 2020. DOI: https://doi.org/10.1016/j.ijhydene.2019.10.192
A. Wang, Y. Jia, and W. L. Soong, "Comparison of Five Topologies for an Interior Permanent-Magnet Machine for a Hybrid Electric Vehicle," IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 3606–3609, Jul. 2011. DOI: https://doi.org/10.1109/TMAG.2011.2157097
B. S. Marwa, A. K. Mohamed, B. F. Mouldi, and R. Habib, "Effect of the stator mutual leakage reactance of dual stator induction generator," International Journal of Electrical Energy, vol. 2, no. 3, pp. 1810–1818, 2014. DOI: https://doi.org/10.12720/ijoee.2.3.189-193
Y. Yang et al., "Design and Comparison of Interior Permanent Magnet Motor Topologies for Traction Applications," IEEE Transactions on Transportation Electrification, vol. 3, no. 1, pp. 86–97, Mar. 2017. DOI: https://doi.org/10.1109/TTE.2016.2614972
H. Xiong et al., "An energy matching method for battery electric vehicle and hydrogen fuel cell vehicle based on source energy consumption rate," International Journal of Hydrogen Energy, vol. 44, no. 56, pp. 29733–29742, Nov. 2019. DOI: https://doi.org/10.1016/j.ijhydene.2019.02.169
M. A. Khlifi, M. Ben Slimene, M. Ben Fredj, and H. Rhaoulia, "Performance evaluation of self-excited DSIG as a stand-alone distributed energy resources," Electrical Engineering, vol. 98, no. 2, pp. 159–167, Jun. 2016. DOI: https://doi.org/10.1007/s00202-015-0349-y
M. F. El-Khatib, M. N. Sabry, M. I. A. El-Sebah, and S. A. Maged, "Hardware-in-the-loop testing of simple and intelligent MPPT control algorithm for an electric vehicle charging power by photovoltaic system," ISA Transactions, vol. 137, pp. 656–669, Jun. 2023. DOI: https://doi.org/10.1016/j.isatra.2023.01.025
X. Liu, Q. Lin, and W. Fu, "Optimal Design of Permanent Magnet Arrangement in Synchronous Motors," Energies, vol. 10, no. 11, Nov. 2017, Art. no. 1700. DOI: https://doi.org/10.3390/en10111700
M. B. Sliemene and M. A. Khlifi, "Persistent Voltage Control of a Wind Turbine-Driven Isolated Multiphase Induction Machine," Engineering, Technology & Applied Science Research, vol. 13, no. 5, pp. 11932–11936, Oct. 2023. DOI: https://doi.org/10.48084/etasr.6330
M. Y. Veeresh, V. N. B. Reddy, and R. Kiranmayi, "Modeling and Analysis of Time Response Parameters of a PMSM-Based Electric Vehicle with PI and PID Controllers," Engineering, Technology & Applied Science Research, vol. 12, no. 6, pp. 9737–9741, Dec. 2022. DOI: https://doi.org/10.48084/etasr.5321
M. B. Slimene, "Buck converter topology for fuel cell hybrid vehicles.," Przeglad Elektrotechniczny, vol. 2023, no. 9, 2023. DOI: https://doi.org/10.15199/48.2023.09.19
K. Unni and S. Thale, "Energy Consumption Analysis for the Prediction of Battery Residual Energy in Electric Vehicles," Engineering, Technology & Applied Science Research, vol. 13, no. 3, pp. 11011–11019, Jun. 2023. DOI: https://doi.org/10.48084/etasr.5868
Downloads
How to Cite
License
Copyright (c) 2023 Mohamed Arbi Khlifi, Marwa Ben Slimene
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.
