Improvement of Sliding Mode Control Strategy Founded on Cascaded Doubly Fed Induction Generator Powered by a Matrix Converter

Authors

  • A. Maafa Department of Electrical Engineering, Akli Mohand Oulhadj University of Bouira, Algeria
  • H. Mellah Department of Electrical Engineering, Akli Mohand Oulhadj University of Bouira, Algeria https://orcid.org/0000-0003-2841-0530
  • K. Ghedamsi Laboratoire de Maîtrise des Energies Renouvelables, Bejaia University, Algeria
  • D. Aouzellag Laboratoire de Maîtrise des Energies Renouvelables, Bejaia University, Algeria
Volume: 12 | Issue: 5 | Pages: 9217-9223 | October 2022 | https://doi.org/10.48084/etasr.5166

Abstract

The current paper presents a Sliding Mode Controller (SMC) for indirect field-oriented Cascaded Doubly Fed Induction Generator (CDFIG) powered through a Matrix Converter (MC). The proposed SMC employs a continuous control strategy to accomplish free chattering fractional-order sliding-mode control and to ensure that the control of the first DFIG stator's reactive and active power is separated. An MC is used to control the current provided to the second stator of the CDFIG as an alternative to standard voltage source inverters. The two MCs are controlled via Space-Vector Pulse-Width Modulation (SVPWM) and Indirect Field Oriented Control (IFOC). The proposed Wind Power Generation System (WPGS) is used with the purpose to ensure Maximum Power Point Tracking (MPPT) sensing under various disturbance variables such as turbulent wind. The simulation results prove the efficiency and robustness of the proposed method.

Keywords:

Sliding mode control, Wind Power Generation System (WPGS), Cascaded Doubly Fed Induction Generator (CDFIG), Matrix Converter (MC)

Downloads

Download data is not yet available.

References

H. Mellah, S. Arslan, H. Sahraoui, K. E. Hemsas, and S. Kamel, "The Effect of Stator Inter-Turn Short-Circuit Fault on DFIG Performance Using FEM," Engineering, Technology & Applied Science Research, vol. 12, no. 3, pp. 8688–8693, Jun. 2022. DOI: https://doi.org/10.48084/etasr.4923

A. Maafa, D. Aouzellag, K. Ghedamsi, and R. Abdessemed, "Cascaded doubly fed induction generator with variable pitch control system," Revue Roumaine des Sciences Techniques, vol. 61, no. 4, pp. 361–366, 2016.

P. D. Chung, "Smoothing the Power Output of a Wind Turbine Group with a Compensation Strategy of Power Variation," Engineering, Technology & Applied Science Research, vol. 11, no. 4, pp. 7343–7348, Aug. 2021. DOI: https://doi.org/10.48084/etasr.4234

F. Poitiers, T. Bouaouiche, and M. Machmoum, "Advanced control of a doubly-fed induction generator for wind energy conversion," Electric Power Systems Research, vol. 79, no. 7, pp. 1085–1096, Jul. 2009. DOI: https://doi.org/10.1016/j.epsr.2009.01.007

D. Aouzellag, K. Ghedamsi, and E. M. Berkouk, "Network power flux control of a wind generator," Renewable Energy, vol. 34, no. 3, pp. 615–622, Mar. 2009. DOI: https://doi.org/10.1016/j.renene.2008.05.049

M. Adjoudj, M. Abid, A. Aissaoui, H. Bounoua, and Y. Ramdani, "Sliding mode control of a doubly fed induction generator for wind turbines," Revue Roumaine des Sciences Techniques, vol. 51, no. 1, pp. 15–24, 2011.

K. Ghedamsi, D. Aouzellag, and E. M. Berkouk, "Control of wind generator associated to a flywheel energy storage system," Renewable Energy, vol. 33, no. 9, pp. 2145–2156, Sep. 2008. DOI: https://doi.org/10.1016/j.renene.2007.12.009

A. Djoudi, S. Bacha, H. Iman-Eini, and T. Rekioua, "Sliding mode control of DFIG powers in the case of unknown flux and rotor currents with reduced switching frequency," International Journal of Electrical Power & Energy Systems, vol. 96, pp. 347–356, Mar. 2018. DOI: https://doi.org/10.1016/j.ijepes.2017.10.009

M. Rahimi, "Improvement of energy conversion efficiency and damping of wind turbine response in grid connected DFIG based wind turbines," International Journal of Electrical Power & Energy Systems, vol. 95, pp. 11–25, Feb. 2018. DOI: https://doi.org/10.1016/j.ijepes.2017.08.005

R. Cardenas, R. Pena, P. Wheeler, J. Clare, A. Munoz, and A. Sureda, "Control of a wind generation system based on a Brushless Doubly-Fed Induction Generator fed by a matrix converter," Electric Power Systems Research, vol. 103, pp. 49–60, Oct. 2013. DOI: https://doi.org/10.1016/j.epsr.2013.04.006

M. El Achkar, R. Mbayed, G. Salloum, S. Le Ballois, and E. Monmasson, "Generic study of the power capability of a cascaded doubly fed induction machine," International Journal of Electrical Power & Energy Systems, vol. 86, pp. 61–70, Mar. 2017. DOI: https://doi.org/10.1016/j.ijepes.2016.09.011

L. Bouchaoui, K. Hemsas, H. Mellah, and S. Benlahneche, "Power transformer faults diagnosis using undestructive methods (Roger and IEC) and artificial neural network for dissolved gas analysis applied on the functional transformer in the Algerian north-eastern: a comparative study," Electrical Engineering & Electromechanics, no. 4, pp. 3–11, Apr. 2021. DOI: https://doi.org/10.20998/2074-272X.2021.4.01

K. Protsenko and D. Xu, "Modeling and Control of Brushless Doubly-Fed Induction Generators in Wind Energy Applications," IEEE Transactions on Power Electronics, vol. 23, no. 3, pp. 1191–1197, Feb. 2008. DOI: https://doi.org/10.1109/TPEL.2008.921187

M. Moazen, R. Kazemzadeh, and M.-R. Azizian, "Mathematical modeling and analysis of brushless doubly fed reluctance generator under unbalanced grid voltage condition," International Journal of Electrical Power & Energy Systems, vol. 83, pp. 547–559, Dec. 2016. DOI: https://doi.org/10.1016/j.ijepes.2016.04.050

M. Adamowicz and R. Strzelecki, "Cascaded doubly fed induction generator for mini and micro power plants connected to grid," in 13th International Power Electronics and Motion Control Conference, Poznan, Poland, Sep. 2008, pp. 1729–1733. DOI: https://doi.org/10.1109/EPEPEMC.2008.4635516

N. Taib, B. Metidji, and T. Rekioua, "Performance and efficiency control enhancement of wind power generation system based on DFIG using three-level sparse matrix converter," International Journal of Electrical Power & Energy Systems, vol. 53, pp. 287–296, Dec. 2013. DOI: https://doi.org/10.1016/j.ijepes.2013.05.019

N. Mohan, T. M. Undeland, and W. P. Robbins, Power Electronics: Converters, Applications, and Design, 3rd ed. New York, NY, USA: Wiley, 2002.

A. Djahbar, B. Benziane, and A. Zegaoui, "A Novel Modulation Method for Multilevel Matrix Converter," Energy Procedia, vol. 50, pp. 988–998, Jan. 2014. DOI: https://doi.org/10.1016/j.egypro.2014.06.118

A. Alesina and M. G. B. Venturini, "Analysis and design of optimum-amplitude nine-switch direct AC-AC converters," IEEE Transactions on Power Electronics, vol. 4, no. 1, pp. 101–112, Jan. 1989. DOI: https://doi.org/10.1109/63.21879

V. T. Ha, P. T. Giang, and V. H. Phuong, "T-Type Multi-Inverter Application for Traction Motor Control," Engineering, Technology & Applied Science Research, vol. 12, no. 2, pp. 8321–8327, Apr. 2022. DOI: https://doi.org/10.48084/etasr.4776

A. Benachour, E. M. Berkouk, and M. Mahmoudi, "A new direct torque control of induction machine fed by indirect matrix converter," Revue Roumaine des Sciences Techniques, vol. 62, pp. 25–30, Jan. 2017.

F. Yue, P. W. Wheeler, and J. C. Clare, "Relationship of Modulation Schemes for Matrix Converters," in 3rd IET International Conference on Power Electronics, Machines and Drives - PEMD 2006, Dublin, Ireland, Apr. 2006, pp. 266–270. DOI: https://doi.org/10.1049/cp:20060113

D. Casadei, G. Grandi, G. Serra, and A. Tani, "Space vector control of matrix converters with unity input power factor and sinusoidal input/output waveforms," in Fifth European Conference on Power Electronics and Applications, Brighton, UK, Sep. 1993, vol. 7, pp. 170–175.

L. Huber and D. Borojevic, "Space vector modulated three-phase to three-phase matrix converter with input power factor correction," IEEE Transactions on Industry Applications, vol. 31, no. 6, pp. 1234–1246, Aug. 1995. DOI: https://doi.org/10.1109/28.475693

P. Bunpakdee, J. Theeranan, and C. Jeraputra, "Experimental Validation of Vector Control of a Matrix Converter Fed Induction Generator for Renewable Energy Sources," Procedia Computer Science, vol. 86, pp. 397–400, Jan. 2016. DOI: https://doi.org/10.1016/j.procs.2016.05.043

S. M. Dabour, A. S. Abdel-Khalik, S. Ahmed, A. M. Massoud, and S. M. Allam, "Common-mode voltage reduction for space vector modulated three- to five-phase indirect matrix converter," International Journal of Electrical Power & Energy Systems, vol. 95, pp. 266–274, Feb. 2018. DOI: https://doi.org/10.1016/j.ijepes.2017.08.020

D. Varajao and R. E. Araujo, "Modulation Methods for Direct and Indirect Matrix Converters: A Review," Electronics, vol. 10, no. 7, Jan. 2021, Art. no. 812. DOI: https://doi.org/10.3390/electronics10070812

A. Abdelrehim, S. D. Erfan, M. El-Habrouk, and K. H. Youssef, "Indirect 3D-Space Vector Modulation for Matrix Converter," Engineering, Technology & Applied Science Research, vol. 8, no. 2, pp. 2847–2852, Apr. 2018. DOI: https://doi.org/10.48084/etasr.2007

A. Maafa, D. Aouzellag, K. Ghedamsi, and R. Abdessemed, Modélisation et contrôle en puissance d’une cascade de deux machines asynchrones doublement alimentées (CDFIG). Batna, Algeria: University of Batna 2, 2010.

H. Zahedi Abdolhadi, G. Arab Markadeh, and S. Taghipour Boroujeni, "Sliding Mode and Terminal Sliding Mode Control of Cascaded Doubly Fed Induction Generator," Iranian Journal of Electrical and Electronic Engineering, vol. 17, no. 3, pp. 1955–1955, Sep. 2021.

X. Yan and M. Cheng, "A Robust Grid Synchronization Method for Cascaded Brushless Doubly Fed Induction Generator," in 22nd International Conference on Electrical Machines and Systems, Harbin, China, Aug. 2019, pp. 1–6. DOI: https://doi.org/10.1109/ICEMS.2019.8922507

X. Yan and M. Cheng, "A Robustness-Improved Control Method Based on ST-SMC for Cascaded Brushless Doubly Fed Induction Generator," IEEE Transactions on Industrial Electronics, vol. 68, no. 8, pp. 7061–7071, Dec. 2021. DOI: https://doi.org/10.1109/TIE.2020.3007087

R. Sadeghi, S. M. Madani, M. Ataei, M. R. Agha Kashkooli, and S. Ademi, "Super-Twisting Sliding Mode Direct Power Control of a Brushless Doubly Fed Induction Generator," IEEE Transactions on Industrial Electronics, vol. 65, no. 11, pp. 9147–9156, Aug. 2018. DOI: https://doi.org/10.1109/TIE.2018.2818672

O. Moussa, R. Abdessemed, and S. Benaggoune, "Super-twisting sliding mode control for brushless doubly fed induction generator based on WECS," International Journal of System Assurance Engineering and Management, vol. 10, no. 5, pp. 1145–1157, Oct. 2019. DOI: https://doi.org/10.1007/s13198-019-00844-3

H. Wang et al., "A Cascade PI-SMC Method for Matrix Converter-Fed BDFIM Drives," IEEE Transactions on Transportation Electrification, vol. 7, no. 4, pp. 2541–2550, Sep. 2021. DOI: https://doi.org/10.1109/TTE.2021.3061742

Downloads

How to Cite

[1]
A. Maafa, H. Mellah, K. Ghedamsi, and D. Aouzellag, “Improvement of Sliding Mode Control Strategy Founded on Cascaded Doubly Fed Induction Generator Powered by a Matrix Converter”, Eng. Technol. Appl. Sci. Res., vol. 12, no. 5, pp. 9217–9223, Oct. 2022.

Metrics

Abstract Views: 431
PDF Downloads: 166

Metrics Information
Bookmark and Share

Most read articles by the same author(s)