Comparative Efficiency Measurement of UAV Propellers Using a Microcontroller-Based Test Bench
Received: 21 October 2025 | Revised: 15 November 2025 | Accepted: 1 December 2025 | Online: 9 February 2026
Corresponding author: Erwan Eko Prasetiyo
Abstract
Optimizing small-scale electric propulsion systems is essential for improving Unmanned Aerial Vehicle (UAV) performance. However, the complexity and specialized nature of commercial test equipment remain a significant barrier. This paper details the design, fabrication, and validation of an accessible, microcontroller-based instrument capable of comprehensive performance characterization. The system integrates an ESP32 microcontroller to simultaneously measure mechanical thrust, electrical power consumption, and exit airflow velocity. To demonstrate its analytical capabilities, the instrument was used to conduct a comparative study on three 10×5-inch propellers fabricated using different methods: commercial injection molding, silicone mold casting, and 3D printing. The results revealed significant performance variations, with the developed instrument successfully measuring total propulsive efficiencies ranging from 18% to a peak of 30%. The commercial propeller was identified as the most efficient. This study validates the developed test bench as an effective and accessible tool for detailed analysis and the optimization of electric propulsion systems.
Keywords:
propeller efficiency, thrust stand, performance evaluation, UAV, electric propulsionDownloads
References
D. Joshi, D. Deb, and S. M. Muyeen, "Comprehensive Review on Electric Propulsion System of Unmanned Aerial Vehicles," Frontiers in Energy Research, vol. 10, May 2022, Art. no. 752012. DOI: https://doi.org/10.3389/fenrg.2022.752012
B. Zhang, Z. Song, F. Zhao, and C. Liu, "Overview of Propulsion Systems for Unmanned Aerial Vehicles," Energies, vol. 15, no. 2, Jan. 2022, Art. no. 455. DOI: https://doi.org/10.3390/en15020455
O. D. Dantsker, R. Mancuso, M. S. Selig, and M. Caccamo, "High-Frequency Sensor Data Acquisition System (SDAC) for Flight Control and Aerodynamic Data Collection," in 32nd AIAA Applied Aerodynamics Conference, Atlanta, GA, USA, June 2014. DOI: https://doi.org/10.2514/6.2014-2565
O. Gur and A. Rosen, "Optimizing Electric Propulsion Systems for Unmanned Aerial Vehicles," Journal of Aircraft, vol. 46, no. 4, pp. 1340–1353, July 2009. DOI: https://doi.org/10.2514/1.41027
M. Etewa, A. F. Hassan, E. Safwat, M. A. H. Abozied, M. M. El-Khatib, and A. Ramirez-Serrano, "Performance Estimation of Fixed-Wing UAV Propulsion Systems," Drones, vol. 8, no. 9, Aug. 2024, Art. no. 424. DOI: https://doi.org/10.3390/drones8090424
N. S. Zawodny, H. Haskin, and D. M. Nark, "Aerodynamic Performance and Acoustic Measurements of a High-Lift Propeller in an Isolated Configuration," in 2018 AIAA/CEAS Aeroacoustics Conference, Atlanta, GA, USA, June 2018. DOI: https://doi.org/10.2514/6.2018-3448
P. Kósa et al., "Experimental Measurement of a UAV Propeller’s Thrust," Tehnicki vjesnik - Technical Gazette, vol. 29, no. 1, Feb. 2022. DOI: https://doi.org/10.17559/TV-20201212185220
A. Alikhani and M. R. Salimi, "Design, Construction and Performance Evaluation of a Cold Gas Thruster Test Stand," Journal of Space Science and Technology, vol. 15, no. English Special Issue, pp. 55–64, Mar. 2022. DOI: https://doi.org/10.30699/jsst.2021.1305
T. H. Stevenson and E. G. Lightsey, "Design and Operation of a Thrust Test Stand for University Small Satellite Thrusters," in 2018 AIAA Aerospace Sciences Meeting, Kissimmee, FL, USA, Jan. 2018. DOI: https://doi.org/10.2514/6.2018-2117
Z. Jun, M. A. Akbar, W. Xin Lei, C. Yi Hua, and Danaish, "Theoretical and experimental investigation of six‐degree‐of‐freedom force/thrust measurement stand," IET Science, Measurement & Technology, vol. 14, no. 8, pp. 883–890, Oct. 2020. DOI: https://doi.org/10.1049/iet-smt.2020.0046
M. R. Inchingolo, M. Merino, M. Wijnen, and J. Navarro-Cavallé, "Thrust Measurements of a Waveguide Electron Cyclotron Resonance Thruster," Journal of Applied Physics, vol. 135, no. 9, Mar. 2024, Art. no. 093304. DOI: https://doi.org/10.1063/5.0186778
M. Kühn, C. Toursel, and J. Schein, "Thrust Measurements on the High Efficient and Reliable Vacuum Arc Thruster (HERVAT)," Applied Sciences, vol. 11, no. 5, Mar. 2021, Art. no. 2274. DOI: https://doi.org/10.3390/app11052274
H. Wang, W. Wang, J. Yan, C. Fu, and W. Liu, "Measurement and Prediction of Micronewton Class Thrust of Electric Propulsion Based on the Torsional Pendulum and Machine Learning Technique," IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1–14, 2023. DOI: https://doi.org/10.1109/TIM.2022.3225035
A. Pugna, C. Hrab, L.-N. Hînsa, A. Hopârtean, C.-M. Giurgea, and L. Marcu, "Development of an Experimental Setup for Propeller Performance Measurements," E3S Web of Conferences, vol. 608, 2025, Art. no. 02013. DOI: https://doi.org/10.1051/e3sconf/202560802013
C. Singh, R. Samkaria, and T. Shukla, "Propeller Power Effect Study Instrumentation for Performance Evaluation of Aircraft Design," in 2020 IEEE 17th India Council International Conference, New Delhi, India, Dec. 2020, pp. 1–5. DOI: https://doi.org/10.1109/INDICON49873.2020.9342502
S. Scharmann et al., "Thrust Measurement of an Ion Thruster by a Force Probe Approach and Comparison to a Thrust Balance," AIP Advances, vol. 12, no. 4, Apr. 2022, Art. no. 045218. DOI: https://doi.org/10.1063/5.0066401
Drone Building and Optimization: How to Increase Your Flight Time, Payload and Overall Efficiency. Gatineau, QC Canada: Tyto Robotics, 2025.
Series 1585 Thrust Stand. (v. 2025), Tyto Robotics, Gatineau, QC Canada. [Online]. Available: https://www.tytorobotics.com/pages/series-1580-1585.
Downloads
How to Cite
License
Copyright (c) 2025 Erwan Eko Prasetiyo, Erwhin Irmawan, Gaguk Marausna; Ikbal Rizki Putra; Hendriana Helda Pratama, Fadhli Atha Hidayat
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.
