Maintenance Strategy Selection and Its Impact on the Optimization of Life Cycle Costs in Industrial Systems
Received: 2 October 2025 | Revised: 5 November 2025 and 26 November 2025 | Accepted: 28 November 2025 | Online: 9 February 2026
Corresponding author: Zineb Znaidi
Abstract
This paper proposes to examine the impact of corrective, preventive, and predictive maintenance strategies on the Life Cycle Cost (LCC) of industrial equipment. A baseline assessment of current Reliability, Availability, and Maintainability (RAM) and LCC was performed using real maintenance and failure data, supported by a cost-based model covering acquisition, operation, downtime, and repair costs. To enhance decision-making, a Random Forest model was applied as a machine learning tool to identify the most appropriate maintenance strategy for each subsystem or critical spare part. By combining RAM indicators with cost data, the model enabled the optimal assignment of maintenance types, linking technical performance to economic outcomes. Results show that transitioning from corrective to preventive maintenance improves Mean Time Between Failures (MTBF) by 15% and reduces Mean Time to Repair (MTTR) by 10%, lowering LCC by 8–10%, whereas moving further to predictive maintenance enhances MTBF by 20% and decreases MTTR by 15%, achieving up to an 18% additional LCC reduction. Although preventive and predictive strategies require higher initial investments, they significantly reduce downtime and unplanned failures compared with corrective approaches. Overall, this work highlights the value of integrating RAM–LCC analysis with machine learning to guide maintenance strategy selection and demonstrates a practical path toward improving reliability, cost efficiency, and sustainability in Industry 4.0.
Keywords:
maintenance strategy, reliability, availability, maintainability, Life Cycle Cost (LCC), random forestDownloads
References
K. Adu-Amankwa, A. K. A. Attia, M. N. Janardhanan, and I. Patel, "A predictive maintenance cost model for CNC SMEs in the era of industry 4.0," The International Journal of Advanced Manufacturing Technology, vol. 104, no. 9, pp. 3567–3587, Oct. 2019. DOI: https://doi.org/10.1007/s00170-019-04094-2
S. Wieke, "Life cycle cost analysis in investment projects – examination of case studies and risk mitigation with Monte Carlo simulation," Scientific Review Engineering and Environmental Sciences, vol. 34, no. 1, pp. 3–18, Mar. 2025. DOI: https://doi.org/10.22630/srees.9798
D. Greiner and A. Cacereño, "Enhancing the maintenance strategy and cost in systems with surrogate assisted multiobjective evolutionary algorithms," Developments in the Built Environment, vol. 19, Oct. 2024, Art. no. 100478. DOI: https://doi.org/10.1016/j.dibe.2024.100478
P. Babashamsi et al., "A Comparative Study of Probabilistic and Deterministic Methods for the Direct and Indirect Costs in Life-Cycle Cost Analysis for Airport Pavements," Sustainability, vol. 14, no. 7, Apr. 2022, Art. no. 3819. DOI: https://doi.org/10.3390/su14073819
Y. Asiedu and P. Gu, "Product life cycle cost analysis: State of the art review," International Journal of Production Research, vol. 36, no. 4, pp. 883–908, Apr. 1998. DOI: https://doi.org/10.1080/002075498193444
N. Williams, "Life Cycle Assessment (LCA) of Industrial Motors: Environmental and Economic Impacts." Researchgate, May 30, 2025, [Online]. Available: https://www.researchgate.net/publication/392202385_Life_Cycle_Assessment_LCA_of_Industrial_Motors_Environmental_and_Economic_Impacts.
M. Njigela and J. Mkilania, "Development of a Life Cycle Cost Analysis Model for Mortuary Buildings to Enhance Availability Performance: The Case Study of Musoma Municipal Council Hospital," International Journal of Advanced Research, vol. 8, no. 1, pp. 488–507, Aug. 2025. DOI: https://doi.org/10.37284/ijar.8.1.3494
J. Osheyor Gidiagba, C. Daraojimba, O. Ayo Ogunjobi, K. Anthony Ofonagoro, and A. Adepoju Fawole, "Advancing Offshore Oil and Gas Facilities: A Comprehensive Review of Innovative Maintenance Strategies for Enhanced Reliability and Efficiency," Economic Growth and Environment Sustainability, vol. 2, no. 2, pp. 84–95, Sept. 2023. DOI: https://doi.org/10.26480/egnes.02.2023.84.95
M. Compare, F. Antonello, L. Pinciroli, and E. Zio, "A general model for life-cycle cost analysis of Condition-Based Maintenance enabled by PHM capabilities," Reliability Engineering & System Safety, vol. 224, Aug. 2022, Art. no. 108499. DOI: https://doi.org/10.1016/j.ress.2022.108499
S. S. Mahure, A. Deharkar, and L. Yadav, "The Role of Machine Learning in Predictive Maintenance for Manufacturing Industries," International Journal of Innovative Research in Science, Engineering and Technology, vol. 13, no. 5, pp. 7101–7106, May 2024.
T. O. Igunma and E. A. Etukudoh, "Utilizing Advanced Analytics and Machine Learning for Predictive Maintenance of Industrial Equipment," International Journal of Academic Management Science Research, vol. 9, no. 4, pp. 439–449, Apr. 2025.
O. Durán and B. Vergara, "Maintenance Strategies Definition Based on Systemic Resilience Assessment: A Fuzzy Approach," Mathematics, vol. 10, no. 10, May 2022, Art. no. 1677. DOI: https://doi.org/10.3390/math10101677
Z. Su, Z. Hua, D. Hu, and M. Zhao, "Research on Equipment Reliability Modeling and Periodic Maintenance Strategies in Dynamic Environment," Eksploatacja i Niezawodność – Maintenance and Reliability, vol. 27, no. 1, Aug. 2024, Art. no. 192163. DOI: https://doi.org/10.17531/ein/192163
A. H. Zamzam, A. K. Abdul Wahab, M. M. Azizan, S. C. Satapathy, K. W. Lai, and K. Hasikin, "A Systematic Review of Medical Equipment Reliability Assessment in Improving the Quality of Healthcare Services," Frontiers in Public Health, vol. 9, Sept. 2021, Art. no. 753951. DOI: https://doi.org/10.3389/fpubh.2021.753951
C. A. Murad, A. H. A. de Melani, M. A. C. de Michalski, A. C. Netto, and G. F. M. de Souza, "Estimation of Operational And Maintenance Tasks Influence on Equipment Availability Through Petri Net Modeling," in 2020 Annual Reliability and Maintainability Symposium, Palm Springs, CA, USA, 2020, pp. 1–6. DOI: https://doi.org/10.1109/RAMS48030.2020.9153582
S. Peng and N. Vayenas, "Maintainability Analysis of Underground Mining Equipment Using Genetic Algorithms: Case Studies with an LHD Vehicle," Journal of Mining, vol. 2014, no. 1, Feb. 2014, Art. no. 528414. DOI: https://doi.org/10.1155/2014/528414
X. Li, X. Song, and D. Ouelhadj, "A Cost Optimisation Model for Maintenance Planning in Offshore Wind Farms with Wind Speed Dependent Failure Rates," Mathematics, vol. 11, no. 13, July 2023, Art. no. 2809. DOI: https://doi.org/10.3390/math11132809
Yu. T. Zyryanov, N. G. Chernyshov, I. G. Ryazanov, A. Yu. Naumova, and M. F. Dioumessy, "Application of Generalized Distribution Laws for the Reliability Assessment of Information and Measuring Systems of Energy Saving Control," Journal of Physics: Conference Series, vol. 1172, no. 1, Mar. 2019, Art. no. 012108. DOI: https://doi.org/10.1088/1742-6596/1172/1/012108
H. Albrecher, C. B. Gardner, and B. F. Nielsen, "Phase-type representations for exponential distributions," Advances in Applied Probability, vol. 57, no. 3, pp. 969–999, Sept. 2025. DOI: https://doi.org/10.1017/apr.2024.67
Y. Kassem, H. Camur, and A. A. S. Mosbah, "Wind Resource Evaluation in Libya: A Comparative Study of Ten Numerical Methods for the Estimation of Weibull Parameters using Multiple Datasets," Engineering, Technology & Applied Science Research, vol. 14, no. 2, pp. 13388–13397, Apr. 2024. DOI: https://doi.org/10.48084/etasr.6882
S. Nallainathan, A. Arefi, C. Lund, A. Mehrizi-Sani, and D. Stephens, "Reliability Evaluation of Renewable-Rich Microgrids Using Monte Carlo Simulation Considering Resource and Equipment Availability," in 2020 IEEE International Conference on Power Systems Technology, Bangalore, India, 2020, pp. 1–6. DOI: https://doi.org/10.1109/POWERCON48463.2020.9230577
M. J. Rahimdel and B. Ghodrati, "Reliability, Maintainability, and Availability of Mining Drilling Equipment," in Exploring the World of Drilling, S. Irawan, Ed. London, UK: IntechOpen, 2024, ch. 8. DOI: https://doi.org/10.5772/intechopen.114938
F. H. Kashani and S. Baharmast, "Effect of Supply Chain Information Systems on Firm Performance: An Empirical Case Study," Engineering, Technology & Applied Science Research, vol. 7, no. 2, pp. 1552–1558, Apr. 2017. DOI: https://doi.org/10.48084/etasr.1017
K. Lu, X. Deng, X. Jiang, B. Cheng, and V. W. Y. Tam, "A review on life cycle cost analysis of buildings based on building information modeling," Journal of Civil Engineering and Management, vol. 29, no. 3, pp. 268–288, Feb. 2023. DOI: https://doi.org/10.3846/jcem.2023.18473
S. J. Almalki and S. Nadarajah, "Modifications of the Weibull distribution: A review," Reliability Engineering & System Safety, vol. 124, pp. 32–55, Apr. 2014. DOI: https://doi.org/10.1016/j.ress.2013.11.010
M.-P. Mairesse and A. Desenfans, "Chapitre 4. Évaluation et comptabilisation des entrées d’immobilisations," in EDCG 10 - Comptabilité approfondie - Manuel 2023-2024, Malakoff, France: Dunod, 2023, pp. 61–83.
Z. Znaidi, M. E. H. Ech-Chhibat, A. Khiat, M. E. Khiate, H. Samri, and L. A. E. Maalem, "Introduction to Predictive Maintenance Application using Machine Learning: The Case of the Injection System of a Diesel Engine," Engineering, Technology & Applied Science Research, vol. 15, no. 1, pp. 20108–20117, Feb. 2025. DOI: https://doi.org/10.48084/etasr.9250
A. F. Amiri, H. Oudira, A. Chouder, and S. Kichou, "Faults detection and diagnosis of PV systems based on machine learning approach using random forest classifier," Energy Conversion and Management, vol. 301, Feb. 2024, Art. no. 118076. DOI: https://doi.org/10.1016/j.enconman.2024.118076
Downloads
How to Cite
License
Copyright (c) 2026 Zineb Znaidi, Moulay El Houssine Ech-Chhibat, Azeddine Khiat, Mounir El Khiate, Hassan Samri
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.
