Optimizing Concrete Durability in Aggressive Environments Using Silica-Rich Tropical Hardwood Ash as a Supplementary Cementitious Material (SCM)
Received: 27 July 2025 | Revised: 17 August 2025 and 7 September 2025 | Accepted: 9 September 2025 | Online: 8 December 2025
Corresponding author: Miswar Tumpu
Abstract
The advancements in concrete technology have focused on finding alternative binders to reduce the environmental impact and economic costs of Portland cement (PC) production. These efforts aim to lower the CO₂ emissions, conserve the finite natural resources, and cut the overall construction costs. However, most existing research mainly emphasizes the compressive strength, often overlooking durability—a critical property for concrete exposed to aggressive conditions. In response, the present study assesses the performance of silica-rich tropical hardwood ash as a Supplementary Cementitious Material (SCM), with a focus on improving durability. A total of 252 concrete cubes (100 mm × 100 mm × 100 mm) were prepared using a nominal mix ratio of 1:2:4 and a water–cement ratio of 0.55, with cement replaced at levels of 5%, 10%, 15%, 20%, and 25% by weight. Of these, 180 specimens were tested for compressive strength, while 72 were examined for abrasion resistance and water absorption at 28 and 56 days under both standard curing and sulfate-rich conditions. The results showed only a slight reduction in compressive strength at 20% replacement—0.84% under normal curing at 28 days and 1.63% for unblended mixes exposed to sulfate solution—while significant improvements were noted in abrasion resistance and water sorptivity at 56 days. Additionally, the tropical hardwood ash met the pozzolanic criteria specified in [14], demonstrating its potential as a sustainable binder suitable for durability-focused concrete applications.
Keywords:
silica-rich tropical hardwood ash, supplementary cementitious material, concrete durability, aggressive environments, pozzolanic binderDownloads
References
S. Djokoto, J. Dadzie, and E. Ohemeng-Ababio, "Barriers to Sustainable Construction in the Ghanaian Construction Industry: Consultants Perspectives," Journal of Sustainable Development, vol. 7, no. 1, Jan. 2014, Art. no. 134. DOI: https://doi.org/10.5539/jsd.v7n1p134
W. Fox, Ethics and the Built Environment. Routledge, 2012. DOI: https://doi.org/10.4324/9780203130513
S. Peake, "Delivering the Kyoto baby: UNFCCC COP9 report," Refocus, vol. 5, no. 1, pp. 52–53, Jan. 2004. DOI: https://doi.org/10.1016/S1471-0846(04)00079-4
Darhamsyah, M. Tumpu, M. F. Samawi, M. Anda, A. Abas, and M. Y. Satria, "Reducing Embodied Carbon of Paving Blocks with Landfill Waste Incineration Ash: An Eco-Cement Life Cycle Assessment," Engineering, Technology & Applied Science Research, vol. 15, no. 2, pp. 21913–21917, Apr. 2025. DOI: https://doi.org/10.48084/etasr.10050
B. Ilić, V. Radonjanin, M. Malešev, M. Zdujić, and A. Mitrović, "Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions," Construction and Building Materials, vol. 133, pp. 243–252, Feb. 2017. DOI: https://doi.org/10.1016/j.conbuildmat.2016.12.068
V. Indrawati and A. Manaf, "Mechanical Strength of Trass as Supplementary Cementing Material," Journal of Physical Science, vol. 19, no. 2, pp. 51–59, 2008.
M. Y. Satria, M. F. Samawi, and M. Tumpu, "Semi Quantitative Analyses of Eco-Cement Made From Landfill Waste Burning Ash and Portland Composite Cement," International Journal of Environmental Impacts, vol. 8, no. 2, pp. 259–267, Apr. 2025. DOI: https://doi.org/10.18280/ijei.080206
F. F. Udoeyo and P. U. Dashibil, "Sawdust Ash as Concrete Material," Journal of Materials in Civil Engineering, vol. 14, no. 2, pp. 173–176, Apr. 2002. DOI: https://doi.org/10.1061/(ASCE)0899-1561(2002)14:2(173)
A. U. Elinwa and S. P. Ejeh, "Effects of the Incorporation of Sawdust Waste Incineration Fly Ash in Cement Pastes and Mortars," Journal of Asian Architecture and Building Engineering, vol. 3, no. 1, pp. 1–7, May 2004. DOI: https://doi.org/10.3130/jaabe.3.1
T. R. Naik, R. N. Kraus, and R. Siddique, "Controlled Low-Strength Materials Containing Mixtures of Coal Ash and New Pozzolanic Material," Materials Journal, vol. 100, no. 3, pp. 208–215.
FORMECU (1998) Forest Resources Study Vol. II. Ondo and Ekiti State Forest Inventory, Management, Planning and Recommendations, 1998.
O. A. A, "Heartwood, Sapwood and Bark Proportions in Five Lesser Used Tropical Hardwood Species Growing in Nigeria," Journal of Biology, Agriculture and Healthcare, vol. 3, no. 1, 2013 Art. no. 93.
C. Kandou, M. Tumpu, D. R. G. Kabo, and H. Tumengkol, "Development of High-Performance Concrete with Advanced Materials for Sustainable Building Applications," Engineering, Technology & Applied Science Research, vol. 15, no. 2, pp. 21482–21487, Apr. 2025. DOI: https://doi.org/10.48084/etasr.10299
ASTM C618-25a Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. USA: ASTM International, 2025.
M. Abdullahi, "Characteristics of Wood ASH/OPC Concrete," Leonardo Electronic Journal of Practices and Technologies, no. 8, pp. 9–16, 2006.
ASTM C127-01 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate. USA: ASTM International, 2001.
ASTM, 2004. Standard specification for hydrated lime for masonry purposes (ASTM C141–97). ASTM International, pp.1–2.
ASTM, 2005. Test method for slump of hydraulic-cement concrete (ASTM C143/C143M–05). West Conshohocken, PA: ASTM International, pp.2005–2008.
ASTM C1012/C1012M-12 Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution. USA: ASTM International, 2012.
O. A. Fadele and M. Otieno, "Early-age effect of corn cob ash as a partial replacement for Portland cement in concrete," MATEC Web of Conferences, vol. 364, 2022, Art. no. 02011. DOI: https://doi.org/10.1051/matecconf/202236402011
D. S. Shah, "An Experimental Study on Durability and Water Absorption Properties of Pervious Concrete," International Journal of Research in Engineering and Technology, vol. 03, no. 03, 2014, Art. no. 439. DOI: https://doi.org/10.15623/ijret.2014.0303082
ASTM C151-05 Standard Test Method for Autoclave Expansion of Hydraulic Cement. USA: ASTM International, 2010.
Downloads
How to Cite
License
Copyright (c) 2025 Herman Alfis Tumengkol, Miswar Tumpu, Carter Kandou, Don R. G. Kabo, Beldie Aryona Tombeg
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.
