A Hybrid Modeling and Optimization Framework for Finish Milling Using SVR, NSGA-II, and Entropy-Based TOPSIS
Received: 12 April 2025 | Revised: 4 May 2025 | Accepted: 10 May 2025 | Online: 5 June 2025
Corresponding author: Nhat Tan Nguyen
Abstract
This study presents a hybrid methodology for optimizing finish milling processes by integrating predictive modeling, evolutionary algorithms, and multi-criteria decision-making techniques. The target output responses include surface roughness (Ra), Material Removal Rate (MRR), and cutting force (Fc), modeled as functions of cutting speed (Vc), feed per tooth (fz), axial depth of cut (ap), and radial depth of cut (ae). Support Vector Regression (SVR) models yielded high accuracy for Ra (R² = 0.926) and MRR (R² = 0.999), while a second-order polynomial regression model excelled for Fc (R = 0.938, Radj2 = 0.869). These models were integrated into Non-dominated Sorting Genetic Algorithm II (NSGA-II), generating a Pareto front of 100 optimal solutions. Entropy-weighted Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) ranked these solutions, identifying the best trade-off at Ra = 0.698 μm, MRR = 5228.24 mm³/min, and Fc = 522.17 N, with a TOPSIS score of Ci = 0.878. This solution significantly enhances productivity while maintaining acceptable surface quality and cutting force. The workflow was implemented in MATLAB, demonstrating the efficacy of this hybrid approach for advanced manufacturing. This hybrid framework provides a practical tool for real-time process optimization and decision support in smart manufacturing environments.
Keywords:
multi-objective optimization, SVR, polynomial regression, NSGA-II, TOPSIS, entropy weighting, MATLABDownloads
References
R. I. King, Ed., Handbook of High-Speed Machining Technology. Boston, MA, USA: Springer US, 1985. DOI: https://doi.org/10.1007/978-1-4684-6421-4
H. A. Youssef and H. El-Hofy, Machining Technology: Machine Tools and Operations. Boca Raton, FL, USA: CRC Press, 2008. DOI: https://doi.org/10.1201/9781420043402
E. Budak, "Analytical models for high performance milling. Part I: Cutting forces, structural deformations and tolerance integrity," International Journal of Machine Tools and Manufacture, 2006. DOI: https://doi.org/10.1016/j.ijmachtools.2005.09.009
V. Canh Nguyen, T. Duong Nguyen, and V. Thao Le, "Optimization of sustainable milling of SKD11 steel under minimum quantity lubrication," Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol. 237, no. 3, pp. 907–916, Jun. 2022. DOI: https://doi.org/10.1177/09544089221110978
V. H. Pham, T. D. Nguyen, V. T. Le, D. H. Tien, and V.-C. Nguyen, "Optimization of Cutting Parameters in MQL Flat Surface Milling of SKD11 Steel," in Proceedings of the International Conference on Advanced Mechanical Engineering, Automation, and Sustainable Development 2021, Ha Long, Vietnam, 2022, pp. 261–266. DOI: https://doi.org/10.1007/978-3-030-99666-6_40
P. N. Linh, T. N. Tan, V. D. Toan, and T. D. Nguyen, "Multi-Objective Optimization of Finishing Milling of C45 Steel using Factorial Design," Engineering, Technology & Applied Science Research, vol. 14, no. 6, pp. 18199–18204, Dec. 2024. DOI: https://doi.org/10.48084/etasr.8017
V.-C. Nguyen et al., "Optimizing Ti-6Al-4V Milling under MQL Conditions Using SVR, NSGA-II, and TOPSIS," in Multi-Criteria Decision-Making and Optimum Design with Machine Learning, 1st ed., Boca Raton, FL, USA: CRC Press, 2024. DOI: https://doi.org/10.1201/9781032635170-3
V.-C. Nguyen, D. Hoang Tien, V.-H. Pham, and T.-D. Nguyen, "Investigation and Optimization of Surface Roughness and Material Removal Rate in Face Finishing Milling of Ti-6Al-4V Under MQL Condition," in Proceedings of The AUN/SEED-Net Joint Regional Conference in Transportation, Energy, and Mechanical Manufacturing Engineering, Singapore, Jun. 2022, pp. 812–825. DOI: https://doi.org/10.1007/978-981-19-1968-8_68
F. Yan, L. Wei, J. Hu, J. Zeng, S. Zheng, and J. Wang, "Simultaneous optimization of urea dosing and ammonia coverage ratio of selective catalytic reduction system in diesel engine by using physico-chemical model based NSGA-II algorithm," Applied Thermal Engineering, vol. 154, pp. 46–62, May 2019. DOI: https://doi.org/10.1016/j.applthermaleng.2019.03.031
N. Van-Canh, N. Anh-Thang, P. Ngoc-Linh, and N. Thuy-Duong, "Multi-objective optimization of SUS430C steel turning process using hybrid machine learning and evolutionary algorithm approach," Results in Engineering, vol. 25, Mar. 2025, Art. no. 104233. DOI: https://doi.org/10.1016/j.rineng.2025.104233
V.-C. Nguyen, D.-T. Vu, Q.-H. Tran, V. Q. Kieu, and T. M. Nguyen, "Optimizing EDM for titanium alloys: an in-depth comparison of five MCDM techniques," EUREKA: Physics and Engineering, no. 5, pp. 89–98, Sep. 2024. DOI: https://doi.org/10.21303/2461-4262.2024.003283
P. N. Linh, N. Q. Tu, V.-C. Nguyen, and V.-T. Pham, "Optimization of PLA 3D Printing Parameters using a Combined SMART-MOORA Multi-Criteria Decision-Making Approach," Engineering, Technology & Applied Science Research, vol. 15, no. 1, pp. 19460–19465, Feb. 2025. DOI: https://doi.org/10.48084/etasr.9085
V. T. Le, T.-T. Nguyen, and V. C. Nguyen, "Wire and arc-based additive manufacturing of 316L SS: predicting and optimizing process variables using BRFFNN, NSGA-GP and TOPSIS approach," Neural Comput. Appl., vol. 36, no. 35, pp. 22547–22568, Jun. 2024. DOI: https://doi.org/10.1007/s00521-024-10375-z
V. C. Nguyen, T. D. Nguyen, and D. H. Tien, "Cutting Parameter Optimization in Finishing Milling of Ti-6Al-4V Titanium Alloy under MQL Condition using TOPSIS and ANOVA Analysis," Engineering, Technology & Applied Science Research, vol. 11, no. 1, pp. 6775–6780, Feb. 2021. DOI: https://doi.org/10.48084/etasr.4015
F. Kara, "Optimization of Surface Roughness in Finish Milling Of Aisi P20+s Plastic-mold Steel," Materials and technology, vol. 52, no. 2, pp. 195–200, 2018. DOI: https://doi.org/10.17222/mit.2017.088
L. W. Hernández-González et al., "Effects of cutting parameters on surface roughness and hardness in milling of AISI 304 steel," DYNA, vol. 85, no. 205, pp. 57–63, Jun. 2018. DOI: https://doi.org/10.15446/dyna.v85n205.64798
Downloads
How to Cite
License
Copyright (c) 2025 Nhat Tan Nguyen, Hoang Van Nam, Anh Thang Nguyen, Nhu Trang Le
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.
