Placement Planning of a Powered Cooling Engine on a 5 < Gross Tonnage Fishing Vessel

Authors

  • Didit Eko Setiawan Marine Fisheries Technology, Faculty of Fisheries and Marine Sciences, IPB University, 16680, Bogor, West Java, Indonesia
  • Budhi Hascaryo Iskandar Marine Fisheries Technology, Faculty of Fisheries and Marine Sciences, IPB University, 16680, Bogor, West Java, Indonesia https://orcid.org/0000-0002-0453-5251
  • Fis Purwangka Marine Fisheries Technology, Faculty of Fisheries and Marine Sciences, IPB University, 16680, Bogor, West Java, Indonesia https://orcid.org/0000-0003-1821-8545
  • Vita Rumanti Kurniawati Marine Fisheries Technology, Faculty of Fisheries and Marine Sciences, IPB University, 16680, Bogor, West Java, Indonesia https://orcid.org/0000-0002-8440-7021
  • Ari Purbayanto Marine Fisheries Technology, Faculty of Fisheries and Marine Sciences, IPB University, 16680, Bogor, West Java, Indonesia https://orcid.org/0000-0001-7298-5732
Volume: 15 | Issue: 3 | Pages: 23169-23176 | June 2025 | https://doi.org/10.48084/etasr.10609

Received: 18 February 2025 | Revised: 16 March 2025 and 3 April 2025 | Accepted: 6 April 2025 | Online: 4 June 2025


Corresponding author: Didit Eko Setiawan

Abstract

Small fishing boats with less than 5 Gross Tonnage (GT) are commonly used for day fishing in Sendang Biru, Malang Regency, Indonesia. This study aims to design the placement of a chiller on a fishing boat. The research was conducted through observations of the fisher’s workplace, fishing operations, and fishing duration, as well as by measuring the size of the boat. The results show that the addition of a solar-powered chiller increases the usable area around the fish storage box, while the solar panels are installed on the roof of the boat and also serve as a canopy. This configuration slightly reduces the open space available on the boat. The analysis of boat stability confirms that the placement of the solar-powered chiller complies with international standards, while the analysis of the boat resistance indicates only a minor increase, which does not significantly affect the boat’s speed.

Keywords:

fishing vessels, cooling machines, styling, fish freshness

Downloads

Download data is not yet available.

References

A. Andilala, W. Amiruddin, and A. W. B. Santosa, "Analisa Beban Muatan Maksimum Yang Diperbolehkan Untuk Keselamatan Penumpang Pada Kapal Kharisma Jaya," Jurnal Teknik Perkapalan, vol. 5, no. 4, 2017.

Nurdin, E., and Nugraha, B., "Penangkapan Tuna Dan Cakalang Dengan Menggunakan Alat Tangkap Pancing Ulur (Hand Line) Yang Berbasis Di Pangkalan Pendaratan Ikan Pondokdadap Sendang Biru, Malang," Bawal, vol. 2, no. 1, pp: 27-33, Feb. 2017.

H. E. Irianto, "Teknologi Penanganan Dan Penyimpanan Ikan Tuna Segar Di Atas Kapal," Squalen Bulletin of Marine and Fisheries Postharvest and Biotechnology, vol. 3, no. 2, pp. 41–49, Aug. 2008.

D. E. Setiawan, B. Hascaryo, F. Purwangka, V. Rumanti, A. Purbayanto, and B. Wibowo, "Design of Solar Powered Cooling Engine For Fishing Vessel ≤ 5 GT," International Journal of Marine Engineering Innovation and Research, vol. 9, no. 2, Jun. 2024.

R. Razali and S. Stephan, "Perencanaan Sistem Pendingin Palka Ikan Menggunakan Tenaga Surya," Inovtek Polbeng, vol. 4, no. 2, pp. 98–105, Oct. 2014.

H. Camur, Y. Kassem, and E. Alessi, "A Techno-Economic Comparative Study of a Grid-Connected Residential Rooftop PV Panel: The Case Study of Nahr El-Bared, Lebanon," Engineering, Technology & Applied Science Research, vol. 11, no. 2, pp. 6956–6964, Apr. 2021.

Resolution A.749(18), Code on Intact Stability for All Types of Ships Covered by IMO Instruments, 1st ed. London, UK: International Maritime Organization, 1993.

M. Helmi, N. Nurhasanah, and B. Santoso, "Analisa Pengaruh Pemasangan Cadik Pada Kapal Nelayan 3 GT Ditinjau Dari Power Engine," Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan, vol. 13, no. 2, pp. 78–83, Oct. 2016.

P. K. D. N. Y. Putra, B. H. Iskandar, and Y. Novita, "Using Length of Bilge Keel to Length of Waterline Ratio to Reduce Ship Rolling Motion," Engineering, Technology & Applied Science Research, vol. 8, no. 2, pp. 2731–2734, Apr. 2018.

E. J. Sasono, "Aplikasi Metode Numerik Dalam Perhitungan Luas Dan Volume Badan Kapal Yang Berada Di Bawah Permukaan Air Laut," Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan, vol. 3, no. 3, pp. 83–88, Mar. 2012.

R. Y. S. Wiendargo, A. B. S. Wibawa, and W. Amiruddin, "Analisa Teknis Dan Ekonomis Kapal Nelayan Tradisional Type Outboard Engine Setelah Penambahan Mesin Penarik Bubu Di Perairan Rembang", Jurnal Teknik Perkapalan, vol. 3, no. 4, pp 533-545, Dec. 2015.

S. Ali, F. Ramadani, S. Ali, and D. Syahputra, "Ship resistance analysis to determine the main engine power of the ship", Jurnal Inovasi Sains dan Teknologi Kelautan, vol. 3, no. 2, pp: 19-24, Jul. 2022.

K.-S. Kim and M.-I. Roh, "Review of ship arrangement design using optimization methods, "Journal of Computational Design and Engineering, vol. 12, no. 1, pp. 100–121, Jan. 2025.

S. Manullang, R. Irvana, A. Buwono, and M. Patanda, "Analisa Pengaruh Peletakan Panel Surya di Atas Deck House Kapal Ikan 30 GT Terhadap Keselamatan Operasional Penangkapan Ikan," Jurnal Ilmu dan Teknologi Perikanan Tangkap vol. 8, no. 1, pp. 39–46, Jun. 2023.

N. M. R. R. C. Perbani, Rinaldy, "Penerapan Hitungan Volume Metode Simpson untuk Menghitung Volume Kapal dan Topografi Darat," Rekayasa Hijau : Jurnal Teknologi Ramah Lingkungan, vol. 2, no. 1, Jul. 2018.

Downloads

How to Cite

[1]
Setiawan, D.E., Iskandar, B.H., Purwangka, F., Kurniawati, V.R. and Purbayanto, A. 2025. Placement Planning of a Powered Cooling Engine on a 5 < Gross Tonnage Fishing Vessel. Engineering, Technology & Applied Science Research. 15, 3 (Jun. 2025), 23169–23176. DOI:https://doi.org/10.48084/etasr.10609.

Metrics

Abstract Views: 38
PDF Downloads: 26

Metrics Information

License

Copyright (c) 2025 Didit Eko Setiawan, Budhi Hascaryo Iskandar, Fis Purwangka, Vita Rumanti Kurniawati, Ari Purbayanto

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.