Bonding between New and Old Concrete in Composite Beams under the Effect of Static Loads

Authors

  • Tariq Emad Ibrahim Department of Civil Engineering, College of Engineering, University of Basrah, Basrah, Iraq
  • Oday A. Abdulrazzaq Department of Civil Engineering, College of Engineering, University of Basrah, Basrah, Iraq
  • Samoel Mahdi Saleh Department of Civil Engineering, College of Engineering, University of Basrah, Basrah, Iraq
Volume: 14 | Issue: 5 | Pages: 16646-16652 | October 2024 | https://doi.org/10.48084/etasr.8323

Abstract

This study experimentally investigates the bonding strength of aged and other forms of new concrete. Its primary objective is to assess several methodologies for achieving effective bonding behavior. Additionally, the present study examines the impact of varying stiffness and shrinkage rates at the boundary between concrete layers poured at different times. The experiment on bonding strength included examining the effects of several factors, such as surface preparation, bonding agent type, age difference, and the type of concrete used in the new layer. The flexural test results show that the ultimate load decreases by 16.2%, and 13.3% for composite beams with new concrete of Self-Comparing Concrete (SCC), and steel fibers, respectively, compared to the reference beam. However, the ultimate load increases by 6.5% and 9% for composite beams with new concrete of Sika and High-Strength Concrete (HSC), respectively, compared to the reference beam. So, using new concrete with Sika or HSC is the best choice. The composite beam with shear connectors has the highest ultimate load in the test, whereas the beam with SCC as a new layer has the lowest value. 

Keywords:

composite beams, new concrete, static loads, old concrete, SIKA, SCC

Downloads

Download data is not yet available.

References

N. Altwair and S. Jarir, "Influence of Surface Roughness on Adhesion Between the Existing and New Plain Concretes," Sep. 2018.

B. F. Abdulkareem, A. F. Izzet, and N. Oukaili, "Post-Fire Behavior of Non-Prismatic Beams with Multiple Rectangular Openings Monotonically Loaded," Engineering, Technology & Applied Science Research, vol. 11, no. 6, pp. 7763–7769, Dec. 2021.

M. T. Lakhiar, S. Sohu, I. A. Bhatti, N. Bhatti, S. A. Abbasi, and M. Tarique, "Flexural Performance of Concrete Reinforced by Plastic Fibers," Engineering, Technology & Applied Science Research, vol. 8, no. 3, pp. 3041–3043, Jun. 2018.

Z. H. Abdulghafoor and H. A. Al-Baghdadi, "Static and Dynamic Behavior of Circularized Reinforced Concrete Columns Strengthened with Hybrid CFRP," Engineering, Technology & Applied Science Research, vol. 12, no. 5, pp. 9336–9341, Oct. 2022.

"Bond Strength of Shotcrete Repair," 2004.

E. Bonaldo, J. A. O. Barros, and P. B. Lourenço, "Bond characterization between concrete substrate and repairing SFRC using pull-off testing," International Journal of Adhesion and Adhesives, vol. 25, no. 6, pp. 463–474, Dec. 2005.

O. A. Qasim, "Different Concrete Types Affecting the Bond Strength and Interfacial Joints between New and Old Concrete," IOP Conference Series: Materials Science and Engineering, vol. 745, no. 1, Art. no. 012169, Nov. 2020.

M. Ojaimi, "Experimental Study on Shear Strengthening of Reinforced Concrete Beams Using Different Techniques of Concrete Jacketing," Basrah journal of engineering science, vol. 21, pp. 53–61, Jun. 2021.

O. Adnan, H. Al Bremani, and H. Adai Al-Farttoosi, “Shear Behavior of Two-Layer Beams Made of Normal and Lightweight Concrete Layers,” Basrah journal for engineering science, vol. 22, Apr. 2022.

E. Ogunbode, J. Yatim, hazim Haffendi, A. Abdul-Aziz, M. Ishak, and H. Abdul Hamid, "An Evaluation of the Interfacial Bond Strength of Kenaf Fibrous Concrete and Plain Concrete Composite," vol. 6, pp. 1–6, Jan. 2019.

A. Talaat, A. Emad, A. Tarek, M. Masbouba, A. Essam, and M. Kohail, "Factors affecting the results of concrete compression testing: A review," Ain Shams Engineering Journal, vol. 12, no. 1, pp. 205–221, Mar. 2021.

A. A. Amin, O. Mohamed, and S. Gamal, "Factors affecting the bond strength between new and old concrete," Journal of Advanced Engineering Trends, vol. 42, no. 1, pp. 181–195, Jan. 2022.

E. Júlio and F. Branco, "Reinforced Concrete Jacketing – Interface Influence on Cyclic Loading Response," Aci Structural Journal, vol. 105, pp. 471–477, Jul. 2008.

G. Yildirim, "Effects of Compressive Strength, Autogenous Shrinkage, and Testing Methods on Bond Behavior of High-Early-Strength Engineered Cementitious Composites," Aci Materials Journal, vol. 112, pp. 409–418, Jan. 2015.

Y. Zayia, J. Haido, and M. Ali, "Flexural Behavior of Reinforced Concrete Beams Made with Ordinary and High Strength Concretes: Effect of Interfacial Roughness Between Old and New Concretes," The Journal of The University of Duhok, vol. 20, pp. 570–579, Jul. 2017.

R. Qin, H. Hao, T. Rousakis, and D. Lau, "Effect of shrinkage reducing admixture on new-to-old concrete interface," Composites Part B: Engineering, vol. 167, pp. 346–355, Jun. 2019.

P. Wang et al., "Research on Bonding and Shrinkage Properties of SHCC-Repaired Concrete Beams," Materials (Basel, Switzerland), vol. 13, no. 7, Art. no. 1757, Apr. 2020.

M. A. Mansur, L. M. Huang, K. H. Tan, and S. L. Lee, "Deflections of Reinforced Concrete Beams With Web Openings".

Downloads

How to Cite

[1]
Ibrahim, T.E., Abdulrazzaq, O.A. and Saleh, S.M. 2024. Bonding between New and Old Concrete in Composite Beams under the Effect of Static Loads. Engineering, Technology & Applied Science Research. 14, 5 (Oct. 2024), 16646–16652. DOI:https://doi.org/10.48084/etasr.8323.

Metrics

Abstract Views: 84
PDF Downloads: 103

Metrics Information

Most read articles by the same author(s)