Contributory Factors related to the Tensile Strength of Hot Mix Asphalt Concrete
Received: 23 May 2024 | Revised: 16 June 2024 | Accepted: 18 June 2024 | Online: 3 July 2024
Corresponding author: Mina M. Oleiwi
Abstract
Tensile strength is a critical property of Hot Mix Asphalt (HMA) pavements and is closely related to distresses such as fatigue cracking. This study aims to evaluate methods for assessing fatigue cracking in Asphalt Concrete (AC) mixes. In order to achieve optimum density at different binder contents, the mixes were compressed using a gyratory compactor. Tensile strength was assessed using the Indirect Tensile (IDT) and Semi-Circular Bend (SCB) tests. The results showed that the tensile strength measured by the SCB test was consistently higher than that measured by the IDT test at 25 °C. In addition, the SCB test showed a stronger correlation between increasing binder content and tensile strength. For binder contents ranging from 4.2% to 5.2%, the IDT test results increased from 541% to 678.7%, while the SCB test results increased from 630.3% to 743.7%. These results suggest that the SCB test provides a more accurate representation of the tensile strength of AC mixes than the IDT test.
Keywords:
Marshall mix design, Indirect Tensile (IDT) test, strength test, Semi-Circular Bending (SCB) test, Hot-Mix Asphalt (HMA)Downloads
References
A. Albayati and A. Faleh, "Influence of Temperature Upon Permanent Deformation Parameters of Asphalt Concrete Mixes," University of Baghdad Engineering Journal, vol. 23, pp. 14–32, Aug. 2017.
A. Abed, A. Albayati, and Y. Wang, "Effect of Surface Pavement Type on Traffic Noise," Journal of Engineering, vol. 29, pp. 1–13, Apr. 2023.
A. H. Albayati, "Permanent Deformation Drediction of Asphalt Concrete under Repeated Loading," University of Baghdad, Iraq, vol. 129, 2006.
A. H. Albayati, N. K. Oukaili, H. Obaidi, and B. M. Alatta, "Mitigating Reflection Cracking in Asphalt Concrete Overlays with ECC and Geotextile," Engineering, Technology & Applied Science Research, vol. 14, no. 1, pp. 12850–12860, Feb. 2024.
F. Alzaidy and A. H. K. Albayati, "A Comparison between Static and Repeated Load Test to Predict Asphalt Concrete Rut Depth," Engineering, Technology & Applied Science Research, vol. 11, no. 4, pp. 7363–7369, Aug. 2021.
B. Huang, X. Shu, and Y. Tang, "Comparison of Semi-Circular Bending and Indirect Tensile Strength Tests for HMA Mixtures," Adv. Pavement Eng., Oct. 2005, vol. 22.
M. Arabani and B. Ferdowsi, "Evaluating the Semi-Circular Bending Test for HMA Mixtures," vol. 22, pp. 47–58, Sep. 2008.
C. Szydłowski, J. Górski, M. Stienss, and Ł. Smakosz, "Numerical simulation of asphalt mixtures fracture using continuum models," AIP Conference Proceedings, vol. 1922, no. 1, Art. No. 130012, Jan. 2018.
I. Artamendi and H. Khalid, "A comparison between beam and semi-circular bending fracture tests for asphalt," Road Materials and Pavement Design, vol. 7, pp. 163–180, Jan. 2006.
L. C. Godoi, L. A. T. Brito, N. G. Mensch, and J. A. P. Ceratti, "Utilização do ensaio de flexão sobre amostra semicircular para avaliação da propagação do trincamento em misturas com diferentes ligantes," TRANSPORTES, vol. 27, no. 4, pp. 159–171, Dec. 2019.
B. Huang, X. Shu, and G. Zuo, "Using notched semi circular bending fatigue test to characterize fracture resistance of asphalt mixtures," Engineering Fracture Mechanics, vol. 109, Sep. 2013.
A. Altameemi, "Studying the Possibility of Utilizig the Vast Deposits of Natural Asphalt in Iraq in Spesific Uses Using as Little as Possible Manufacturing Treatment," The Iraqi Journal For Mechanical And Material Engineering, vol. Special Volume Babylon First International Engineering Conference Issue (C), Jan. 2016.
F. Ahmed, R. Lati̇Ef, and A. Albayati̇, "Effect of Natural Bitumen on the Performance of Hot Asphalt Mixture," Gazi University Journal of Science, Dec. 2023.
S. Sarsam and S. Alsadik, "Influence of Aging Time on Asphalt Pavement Performance," Journal of Engineering, vol. 20, no. 12, pp. 1–12, Jul. 2023,.
S. S. Almasoudi and A. H. K. Albayati, "Statistical Analysis of Component Deviation from Job Mix Formula in Hot Mix Asphalt," Engineering, Technology & Applied Science Research, vol. 12, no. 5, pp. 9295–9301, Oct. 2022.
H. M. A. A. Kareem and A. H. K. Albayati, "The Possibility of Minimizing Rutting Distress in Asphalt Concrete Wearing Course," Engineering, Technology & Applied Science Research, vol. 12, no. 1, pp. 8063–8074, Feb. 2022.
SCRB/R9. General specification for roads and bridges, Section R/9, Hot-Mix Asphalt Concrete Pavement. Baghdad, Iraq: Ministry of Housing and Construction, 2003.
S. I. Sarsam and K. H. Sultan, "Impact of Aggregate Gradation and Filler Type on Marshall Properties of Asphalt Concrete," Journal of Engineering, vol. 21, no. 9, pp. 34–46, Sep. 2015.
ASTM D6931-12. Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures. ASTM, 2017.
ASTM D8044-16. Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures. ASTM, 2023.
M. W. Witzcak, Simple Performance Test for Superpave Mix Design. Transportation Research Board, 2002.
H. Wen, "Investigation of Effects of Testing Methods on Characterization of Asphalt Concrete," Journal of Testing and Evaluation, vol. 31, no. 6, pp. 507–513, Nov. 2003.
B. E. Ruth et al., "Aggregate gradation characterization factors and their relationships to fracture energy and failure strain of asphalt mixtures: Asphalt Paving Technology 2002," Asphalt Paving Technology: Association of Asphalt Paving Technologists-Proceedings of the Technical Sessions, vol. 71, pp. 310–344, 2002.
L. N. Mohammad, Z. Wu, and M. A. Aglan, "Characterization of fracture and fatigue resistance on recycled polymer-modified asphalt pavements," Proc., RILEM: 5th Int. Conf. on Cracking in Pavements Mitigation, 2004, pp. 375–382,
Standard Specifications for Construction and Maintenance of Highways, Streets, and Bridges, Austin, TX, USA: Texas Department of Transportation, 2014
T 283-07 (2011). Resistance of Compacted Hot Mix Asphalt (HMA) to MoistureInduced Damage. AASHTO, 2011.
A. Molenaar, A. Skarpas, X. Liu, and S. Erkens, "Semi-circular bending test; simple but useful?," Asphalt Paving Technology: Association of Asphalt Paving Technologists-Proceedings of the Technical Sessions, vol. 71, pp. 794–815, Jan. 2002.
W. G. Buttlar, R. Roque, and N. Kim, "Accurate asphalt mixture tensile strength: Proceedings of the 1996 4th Materials Engineering Conference. Part 1 (of 2)," in Proceedings of the 1996 4th Materials Engineering Conference. Part 1 (of 2), Washington DC, USA, Nov. 1996, pp. 163–172.
M. Mitchell, R. Link, L. Huang, K. Cao, and M. Zeng, "Evaluation of Semicircular Bending Test for Determining Tensile Strength and Stiffness Modulus of Asphalt Mixtures," Journal of Testing and Evaluation, vol. 37, Mar. 2009.
L. F. Walubita, F. Hugo, and M. A. L. Epps, "Indirect tensile fatigue performance of asphalt after MMLS3 trafficking under different environmental conditions," Journal of the South African Institution of Civil Engineering, vol. 44, no. 3, pp. 2–11, Jan. 2002.
M. A. Mull, A. Othman, and L. Mohammad, "Fatigue Crack Propagation Analysis of Chemically Modified Crumb Rubber–Asphalt Mixtures," Journal of Elastomers & Plastics, vol. 37, no. 1, pp. 73–87, Jan. 2005.
X. Li and M. Marasteanu, "Evaluation of the low temperature fracture resistance of asphalt mixtures using the semi circular bend test," Asphalt Paving Technology: Association of Asphalt Paving Technologists-Proceedings of the Technical Sessions, vol. 73, pp. 401–426, Jan. 2004.
S. I. Sarsam, "Assessing the Tensile Properties of Asphalt Concrete," Brilliant Engineering, vol. 3, no. 4, pp. 1–6, Nov. 2022.
Downloads
How to Cite
License
Copyright (c) 2024 Mina M. Oleiwi, Amjad K. Albayati
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.