Performance of Modified Polymer as a Binder with Qarry Dust and Ballast in the Production of Paving Blocks
Received: 7 March 2024 | Revised: 5 June 2024 | Accepted: 20 June 2024 | Online: 28 June 2024
Corresponding author: Priscilla Jebotip Ngetich
Abstract
The city of Nairobi is in need of pedestrian and cyclist infrastructure as an answer to an increasing reliance on automobiles. Collaborative efforts are underway to reduce congestion, although challenges such as sand mining persist. The utilization of plastic waste and Quarry Dust (QD) may provide a sustainable solution. The proposed study aims to assess the mechanical properties and optimal blend design for the production of paving blocks using a modified polymer and a combination of ballast (B) and QD. The gradation curve constituted a pivotal stage in the research process, as it provided vital information regarding the ratio of B and QD required for the optimal mix design. The study methodically explored the optimal ratio of materials for the production of paving blocks incorporating a modified polymer, QD, and B. It was observed that there were minor reductions in strength under acidic conditions, which suggests that the proposed paving blocks may be suitable for use in a variety of outdoor applications. Additionally, it would be advantageous to investigate innovative solutions for Non-Motorized Transport (NMT) infrastructure.
Keywords:
NMT, recycling, sustainability, polymersDownloads
References
S. Khan, R. Anjum, T. Raza, N. Bazai, and I. M., "Technologies for municipal solid waste management: Current status, challenges, and future perspectives," Chemosphere, vol. 288, Oct. 2021, Art. no 132403. DOI: https://doi.org/10.1016/j.chemosphere.2021.132403
V. Havas, J. Falk-Andersson, and P. Deshpande, "Small circles: The role of physical distance in plastics recycling," The Science of the Total Environment, vol. 831, Jul. 2022, Art. no. 154913. DOI: https://doi.org/10.1016/j.scitotenv.2022.154913
R. Suleman, A. Amjad, A. Ismail, S. Javed, U. Ghafoor, and S. Fahad, "Impact of plastic bags usage in food commodities: an irreversible loss to environment," Environmental Science and Pollution Research, vol. 29, no. 33, pp. 49483–49489, Jul. 2022. DOI: https://doi.org/10.1007/s11356-022-21091-3
J. Odero, "Redesigning Solid Waste Flows for a Clean and Sustainable Nairobi City, Kenya," B.Sc. thesis, University of Nairobi, Nairobi, Kenya, 2021.
C. Uzondu, R. A. Acheampong, K. Lucas, M. Poku-Boansi, and C. Uzondu, "Non-motorized Transport and Traffic Safety in African Cities: An Introduction," Transport and Mobility Futures in Urban Africa, Eds. Cham: Springer International Publishing, 2022, pp. 237–243. DOI: https://doi.org/10.1007/978-3-031-17327-1_15
N. Ali, M. Royo, K. Cupers, G. Ndege, J. Campbell-Clause, and J. Bennett, "How can Africa’s urban majority reframe sustainability agendas?," Environment and Urbanization, vol. 36, pp. 13–32, Mar. 2024. DOI: https://doi.org/10.1177/09562478241230498
M. Nailantei, M. Siphilia, and D. Oyaro, "The Physical and Mechanical Properties of Recycled Plastic Waste Paving Blocks for Construction of Non-Motorized Transport (NMT)," East African Journal of Engineering, vol. 6, pp. 155–166, Oct. 2023. DOI: https://doi.org/10.37284/eaje.6.1.1511
N. Radwan and S. Mangi, "Municipal Solid Waste Management Practices and Opportunities in Saudi Arabia," Engineering, Technology and Applied Science Research, vol. 9, Aug. 2019, Art. no. 4516. DOI: https://doi.org/10.48084/etasr.2870
M. T. Lakhiar, S. Sohu, I. A. Bhatti, N. Bhatti, S. A. Abbasi, and M. Tarique, "Flexural Performance of Concrete Reinforced by Plastic Fibers," Engineering, Technology & Applied Science Research, vol. 8, no. 3, pp. 3041–3043, Jun. 2018. DOI: https://doi.org/10.48084/etasr.2084
M. F. Qasim, Z. K. Abbas, and S. K. Abed, "Producing Green Concrete with Plastic Waste and Nano Silica Sand," Engineering, Technology & Applied Science Research, vol. 11, no. 6, pp. 7932–7937, Dec. 2021. DOI: https://doi.org/10.48084/etasr.4593
A. Soni, T. S. Rajput, K. Sahu, and S. Rajak, "Utilization of Waste Plastic in Manufacturing of Paver Blocks," International Journal for Research in Applied Science and Engineering Technology, vol. 10, no. 2, pp. 939–942, Feb. 2022. DOI: https://doi.org/10.22214/ijraset.2022.40410
D. M. S. Mohan, J. Vignesh, P. Iyyappan, and C. Suresh, "Utilization of plastic bags in pavement blocks," International Journal of Pure and Applied Mathematics, vol. 119, pp. 1407–1415, Jan. 2018.
S. M. Shitote, Z. C. A. Gariy and E. Ronoh, "Influence of Coarse Aggregate on the Physical and Mechanical Performance of Paving Blocks made using Waste Plastic," International Journal of Engineering Research & Technology, vol. 8, no. 6, pp. 636-640, 2019.
P. Bhatia, N. Dewangan, and A. Titiksh, "Paver blocks made of Recycled plastic-bonded sand," Journal of Environmental Engineering and its Scope, vol. 2, no. 2, pp. 8–18, Jul. 2019,
J. Ghuge, S. Surale, B. M. Patil, and S. B. Bhutekar, "Utilization of waste plastic in manufacturing of paver blocks," System, vol. 6, no. 4, pp. 1967-1970, 2019.
S. M. Shedge, A. S. Sangle, S. R. Jadhav, P. A. Bansode, and S. B. Gorade, "Bituminous Paving Block - A Solution to Plastic and Demolished Concrete Waste Management," Pramana Research Journal, vol. 9, no. 5, pp. 1001-1006, 2019.
C. Awodiji, S. Sule, and C. Oguguo, "Comparative Study on the Strength Properties of Paving Blocks Produced from Municipal Plastic Waste," Nigerian Journal of Technology, vol. 40, pp. 762–770, Sep. 2021. DOI: https://doi.org/10.4314/njt.v40i5.1
M. Thiam, M. Fall, and M. S. Diarra, "Mechanical properties of a mortar with melted plastic waste as the only binder: Influence of material composition and curing regime, and application in Bamako," Case Studies in Construction Materials, vol. 15, Jul. 2021, Art. no. e00634. DOI: https://doi.org/10.1016/j.cscm.2021.e00634
S. Agyeman, N. Obeng-Ahenkora, S. Assiamah, and G. Twumasi, "Exploiting recycled plastic waste as an alternative binder for paving blocks production," Case Studies in Construction Materials, vol. 11, May 2019. DOI: https://doi.org/10.1016/j.cscm.2019.e00246
S. K. Tulashie, D. Dodoo, A. A.-W. a. M. S. Ibrahim, S. Atisey, R. Odai and D. Mensah, "Recycling plastic wastes for production of sustainable and decorative plastic pavement bricks," Innovative Infrastructure Solutions, vol. 7, no. 4, 2022, Art. no. 265. DOI: https://doi.org/10.1007/s41062-022-00866-0
M. E. Emetere and E. Dania, "Short review on air pollution from cement factories," Journal of Physics: Conference Series, vol. 1299, no. 1, Aug. 2019, Art. no. 012033. DOI: https://doi.org/10.1088/1742-6596/1299/1/012033
Downloads
How to Cite
License
Copyright (c) 2024 Priscilla Jebotip Ngetich, Fundi Isaac Sanewu, Odero J. Brain S.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.