A Study regarding the Technical-Economical Optimization of Structural Components for enhancing the Buckling Resistance in Stiffened Cylindrical Shells

Authors

  • Maria Tanase Mechanical Engineering Department, Petroleum-Gas University Ploiesti, Romania
  • Dragos Gabriel Zisopol Mechanical Engineering Department, Petroleum-Gas University Ploiesti, Romania
  • Alexandra Ileana Portoaca Mechanical Engineering Department, Petroleum-Gas University Ploiesti, Romania
Volume: 13 | Issue: 5 | Pages: 11511-11516 | October 2023 | https://doi.org/10.48084/etasr.6135

Abstract

This paper presents a technical-economical optimization by maximizing the ratio between the critical buckling pressure (technical characteristic) and the production cost (economic characteristic) of stiffened cylindrical shells, a basic concept of value analysis. Critical buckling load values were determined using both the Finite Element Method (FEM) and analytical calculations to validate the accuracy of the results obtained. The maximum difference between the analytical and numerical results was 10%. Technical-economic optimization was carried out using the design of experiments method with MINITAB 19 and allowed to select the optimal input parameters, stiffener dimensional ratio 0.10, shell wall thickness 2.50 mm, and distance between circumferential stiffeners 400 mm, and identify the main factors that impact the output response. For the optimal constructive configuration, the ratio between the critical buckling load and the production cost of the stiffened cylindrical shells was maximized by 199%.

Keywords:

buckling, thin walled cylindrical shell, stiffeneres, finite element analysis, design of experiments, optimization, value analyzis

Downloads

Download data is not yet available.

References

G. Lvov, A. Pupazescu, D. Beschetnikov, and M. Zaharia, "Buckling Analysis of a Thin-walled Cylindrical Shell Strengthened by Fiber - reinforced Polymers," Materiale Plastice, vol. 52, no. 1, pp. 28–31, 2015.

F. Riahi, A. Behravesh, M. Y. Fard, and A. Armaghani, "Buckling Stability Assessment of Plates with Various Boundary Conditions Under Normal and Shear Stresses," Engineering, Technology & Applied Science Research, vol. 7, no. 5, pp. 2056–2061, Oct. 2017.

C. Ilincă and M. Tănase, "Analytical and numerical assessment of buckling strength of silos with corrugated walls under uniform external pressure," Asian Journal of Civil Engineering, vol. 23, no. 2, pp. 289–298, Feb. 2022.

M. Zaharia, A. Pupazescu, and C. M. Petre, "Comparative Study Concerning the Methods of Calculation of the Critical Axial Buckling Load for Stiffened Cylindrical Shells," Revista de Chimie, vol. 69, no. 8, pp. 2000–2004, Sep. 2018.

D. T. Hang, X. T. Nguyen, and D. N. Tien, "Stochastic Buckling Analysis of Non-Uniform Columns Using Stochastic Finite Elements with Discretization Random Field by the Point Method," Engineering, Technology & Applied Science Research, vol. 12, no. 2, pp. 8458–8462, Apr. 2022.

A. Siqueira Nóbrega de Freitas, A. Alfonso Alvarez, R. Ramos, and E. A. de Barros, "Buckling Analysis of an AUV Pressure Vessel with Sliding Stiffeners," Journal of Marine Science and Engineering, vol. 8, no. 7, Jul. 2020, Art. no. 515.

N. Rathinam, B. Prabu, and N. Anbazhaghan, "Buckling analysis of ring stiffened thin cylindrical shell under external pressure," Journal of Ocean Engineering and Science, vol. 6, no. 4, pp. 360–366, Dec. 2021.

D. L. Block and M. M. Mikulas, "Buckling of Eccentrically Stiffened Orthotropic Cylinders," National Aeronautics and Space Administration, Washington, DC, USA, Technical Note TN D-2960, Aug. 1965.

M. Baruch and J. Singer, "Effect of Eccentricity of Stiffeners on the General Instability of Stiffened Cylindrical Shells under Hydrostatic Pressure," Journal of Mechanical Engineering Science, vol. 5, no. 1, pp. 23–27, Mar. 1963.

D. Shiomitsu and D. Yanagihara, "Estimation of ultimate strength of ring-stiffened cylindrical shells under external pressure with local shell buckling or torsional buckling of stiffeners," Thin-Walled Structures, vol. 161, Apr. 2021, Art. no. 107416.

D. V. Dung and L. K. Hoa, "Nonlinear buckling and post-buckling analysis of eccentrically stiffened functionally graded circular cylindrical shells under external pressure," Thin-Walled Structures, vol. 63, pp. 117–124, Feb. 2013.

P. Foryś, "Optimization of cylindrical shells stiffened by rings under external pressure including their post-buckling behaviour," Thin-Walled Structures, vol. 95, pp. 231–243, Oct. 2015.

J. Tian, C. M. Wang, and S. Swaddiwudhipong, "Elastic buckling analysis of ring-stiffened cylindrical shells under general pressure loading via the Ritz method," Thin-Walled Structures, vol. 35, no. 1, pp. 1–24, Sep. 1999.

D. Bushnell and W. D. Bushnell, "Approximate method for the optimum design of ring and stringer stiffened cylindrical panels and shells with local, inter-ring, and general buckling modal imperfections," Computers & Structures, vol. 59, no. 3, pp. 489–527, May 1996.

Y. Gokyer and F. O. Sonmez, "Topology optimization of cylindrical shells with cutouts for maximum buckling strength," Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 45, no. 1, Dec. 2022, Art. no. 13.

D. Graham, "Predicting the collapse of externally pressurised ring-stiffened cylinders using finite element analysis," Marine Structures, vol. 20, no. 4, pp. 202–217, Oct. 2007.

D. G. Zisopol, "The Place and Role of Value Analysis in the Restructuring of Production (Case Study)," Economic Insights - Trends and Challenges, vol. I, no. 4/2012, pp. 27–35, 2012.

D. G. Zisopol, Ingineria Valorii. Ploiești, Romania: Editura Universităţii din Ploieşti, 2004.

M. T. Fernandes, "VALUE ANALYSIS: Going into a Further Dimension," Engineering, Technology & Applied Science Research, vol. 5, no. 2, pp. 781–789, Apr. 2015.

D. G. Zisopol and A. Dumitrescu, Ecotehnologie: studii de caz. Ploiești, Romania: Editura Universității Petrol-Gaze din Ploiești, 2020.

D. G. Zisopol, A. Dumitrescu, and Trifan Ciprian, "Ecotehnologie: Noţiuni teoretice, aplicaţii şi studii de caz." Ploiești, Romania: Editura Universităţii Petrol - Gaze din Ploieşti, 2010.

D. G. Zisopol and A. Dumitrescu, Materiale şi tehnologii primare. Aplicații practice și studii de caz (Materials and Primary Technologies. Practical Applications and Case Studies). Ploiești, Romania: Editura Universității din Ploiești, 2005.

D. G. Zisopol and M. J. Săvulescu, Bazele tehnologiei. Ploiești, Romania: Editura Universităţii din Ploieşti, 2003.

M. J. Săvulescu, D. G. Zisopol, and I. Nae, Bazele tehnologiei materialelor : Îndrumar de lucrări practice. Ploiești, Romania: Editura Premier Ploiești, 1997.

D. G. Zisopol, Tehnologii industriale și de construcții. Aplicații practice și studii de caz (Industrial and Construction Technologies. Practical Applications and Case Studies). Ploiești, Romania: Editura Universității din Ploiești, 2003.

Downloads

How to Cite

[1]
Tanase, M., Zisopol, D.G. and Portoaca, A.I. 2023. A Study regarding the Technical-Economical Optimization of Structural Components for enhancing the Buckling Resistance in Stiffened Cylindrical Shells. Engineering, Technology & Applied Science Research. 13, 5 (Oct. 2023), 11511–11516. DOI:https://doi.org/10.48084/etasr.6135.

Metrics

Abstract Views: 1039
PDF Downloads: 604

Metrics Information

Most read articles by the same author(s)

<< < 1 2