A Research on the Load Calculation Method in Designing the Traction Power Supply for Integrated Subway – MCR

Authors

  • Dong Doan Van Science and Technology Application for Sustainable Development Research Group, Ho Chi Minh City University of Transport, Vietnam
Volume: 13 | Issue: 3 | Pages: 10882-10887 | June 2023 | https://doi.org/10.48084/etasr.5909

Abstract

This paper presents a load calculation method in the design of a traction power supply for integrated subways. Integrated subways have a large carrying capacity and the ability to balance between meeting travel needs and satisfying conditions such as high quality service, cost optimization for railway infrastructure construction, and installation of traction power systems. In an integrated model, the calculation of the traction power supply design is much more complicated than in other stand-alone models. This paper presents the research results on the load calculation method of a traction power supply for the operation of the system. The results show the feasibility of the method when applied to an asynchronous loading system and met the standards of IEEE P1653.2, EN 50328, and IEC 60146-1 in the design of the power supply for permitted overloads according to class VI.

Keywords:

urban rail transit, integrated urban railway, traction power supply

Downloads

Download data is not yet available.

References

Y. Zhou, H. Yang, Y. Wang, and X. Yan, "Integrated line configuration and frequency determination with passenger path assignment in urban rail transit networks," Transportation Research Part B: Methodological, vol. 145, pp. 134–151, Mar. 2021. DOI: https://doi.org/10.1016/j.trb.2021.01.002

W. Kampeerawat and T. Koseki, "Integrated Design of Smart Train Scheduling, Use of Onboard Energy Storage, and Traction Power Management for Energy-Saving Urban Railway Operation," IEEJ Journal of Industry Applications, vol. 8, no. 6, pp. 893–903, 2019. DOI: https://doi.org/10.1541/ieejjia.8.893

W. Kampeerawat and T. Koseki, "Efficient Urban Railway Design Integrating Train Scheduling, Wayside Energy Storage, and Traction Power Management," IEEJ Journal of Industry Applications, vol. 8, no. 6, pp. 915–925, 2019. DOI: https://doi.org/10.1541/ieejjia.8.915

T. Kara and M. C. Savas, "Design and Simulation of a Decentralized Railway Traffic Control System," Engineering, Technology & Applied Science Research, vol. 6, no. 2, pp. 945–951, Apr. 2016. DOI: https://doi.org/10.48084/etasr.631

N. Zhao, C. Roberts, S. Hillmansen, Z. Tian, P. Weston, and L. Chen, "An integrated metro operation optimization to minimize energy consumption," Transportation Research Part C: Emerging Technologies, vol. 75, pp. 168–182, Feb. 2017. DOI: https://doi.org/10.1016/j.trc.2016.12.013

X. Luan, Y. Wang, B. De Schutter, L. Meng, G. Lodewijks, and F. Corman, "Integration of real-time traffic management and train control for rail networks - Part 2: Extensions towards energy-efficient train operations," Transportation Research Part B: Methodological, vol. 115, pp. 72–94, Sep. 2018. DOI: https://doi.org/10.1016/j.trb.2018.06.011

H. Liu, T. Tang, J. Lv, and M. Chai, "An integrated energy conservation model in subway systems," Journal of Physics: Conference Series, vol. 1176, no. 4, Nov. 2019, Art. no. 042042. DOI: https://doi.org/10.1088/1742-6596/1176/4/042042

S. Zhao, H. Yang, and Y. Wu, "An integrated approach of train scheduling and rolling stock circulation with skip-stopping pattern for urban rail transit lines," Transportation Research Part C: Emerging Technologies, vol. 128, Jul. 2021, Art. no. 103170. DOI: https://doi.org/10.1016/j.trc.2021.103170

S. Zhao, J. Wu, Z. Li, and G. Meng, "Train Operational Plan Optimization for Urban Rail Transit Lines Considering Circulation Balance," Sustainability, vol. 14, no. 9, Jan. 2022, Art. no. 5226. DOI: https://doi.org/10.3390/su14095226

X. Yang, A. Chen, X. Li, B. Ning, and T. Tang, "An energy-efficient scheduling approach to improve the utilization of regenerative energy for metro systems," Transportation Research Part C: Emerging Technologies, vol. 57, pp. 13–29, Aug. 2015. DOI: https://doi.org/10.1016/j.trc.2015.05.002

F. Mao, Z. Mao, and K. Yu, "The Modeling and Simulation of DC Traction Power Supply Network for Urban Rail Transit Based on Simulink," Journal of Physics: Conference Series, vol. 1087, no. 4, Jun. 2018, Art. no. 042058. DOI: https://doi.org/10.1088/1742-6596/1087/4/042058

V. V. S. K. Bhajana and P. Drabek, "Development and Evaluation of an Isolated Resonant Converter for Auxiliary Power Supply in DC Traction," Engineering, Technology & Applied Science Research, vol. 9, no. 2, pp. 4048–4052, Apr. 2019. DOI: https://doi.org/10.48084/etasr.2692

Z. Tian, N. Zhao, S. Hillmansen, S. Su, and C. Wen, "Traction Power Substation Load Analysis with Various Train Operating Styles and Substation Fault Modes," Energies, vol. 13, no. 11, Jan. 2020, Art. no. 2788. DOI: https://doi.org/10.3390/en13112788

J. Zhang, W. Liu, Z. Tian, H. Zhang, J. Zeng, and H. Qi, "Modelling, simulating and parameter designing for traction power system with bidirectional converter devices," IET Generation, Transmission & Distribution, vol. 16, no. 1, pp. 110–122, 2022. DOI: https://doi.org/10.1049/gtd2.12281

S. Razmjou and A. Younesi, "A Comprehensive DC Railway Traction System Simulator Based on ‎MATLAB: Tabriz Line 2 Metro Project Case Study," Journal of Operation and Automation in Power Engineering, vol. 9, no. 2, pp. 144–159, Feb. 2021.

Y. Chen, Z. Tian, S. Hillmansen, C. Roberts, and N. Zhao, "DC Traction Power Supply System Reliability Evaluation and Robust Design," in 2019 IEEE 3rd International Electrical and Energy Conference (CIEEC), Beijing, China, Sep. 2019, pp. 1153–1158. DOI: https://doi.org/10.1109/CIEEC47146.2019.CIEEC-2019424

Y. Chen, Z. Tian, C. Roberts, S. Hillmansen, and M. Chen, "Reliability and Life Evaluation of a DC Traction Power Supply System Considering Load Characteristics," IEEE Transactions on Transportation Electrification, vol. 7, no. 3, pp. 958–968, Sep. 2021. DOI: https://doi.org/10.1109/TTE.2020.3047512

S. Su, T. Tang, and Y. Wang, "Evaluation of Strategies to Reducing Traction Energy Consumption of Metro Systems Using an Optimal Train Control Simulation Model," Energies, vol. 9, no. 2, Feb. 2016, Art. no. 105. DOI: https://doi.org/10.3390/en9020105

A. Steimel, Electric Traction - Motive Power and Energy Supply: Basics and Practical Experience. Munich, Germany: Oldenbourg Industrieverlag, 2008.

T. N. Le, H. M. V. Nguyen, T. A. Nguyen, T. T. Phung, and B. D. Phan, "Optimization of Load Ranking and Load Shedding in a Power System Using the Improved AHP Algorithm," Engineering, Technology & Applied Science Research, vol. 12, no. 3, pp. 8512–8519, Jun. 2022. DOI: https://doi.org/10.48084/etasr.4862

Downloads

How to Cite

[1]
Doan Van, D. 2023. A Research on the Load Calculation Method in Designing the Traction Power Supply for Integrated Subway – MCR. Engineering, Technology & Applied Science Research. 13, 3 (Jun. 2023), 10882–10887. DOI:https://doi.org/10.48084/etasr.5909.

Metrics

Abstract Views: 793
PDF Downloads: 430

Metrics Information

Most read articles by the same author(s)