Evaluation of Confining Pressure Models for Circular Concrete-Filled Steel Tube Short Columns under Concentric Loading
Received: 5 December 2022 | Revised: 2 January 2023 | Accepted: 5 January 2023 | Online: 5 February 2023
Corresponding author: Hoang An Le
Abstract
It is well known that the confinement effect provided by the steel tube significantly increases the strength and ductility of circular Concrete Filled Steel Tube (CFST) columns under concentric loading. The lateral pressure is an important factor to calculate the strength enhancement of CFST columns. To reliably predict the ultimate strength of circular CFST columns, many models have been developed for predicting the lateral pressure due to the confinement effect. This paper aims to evaluate some of these confining pressure models. The values of the compressive strength of confined concrete and lateral confining pressure of circular CFST short columns were calculated using these existing models and were compared with those obtained from previous test results. In addition, a comparison between the ultimate loads predicted by these models and by Eurocode 4 (EC4) was carried out. Based on the comparison results, some suitable models for circular CFST short columns with the use of normal-strength, high-strength, and ultra-high-strength concrete were indicated.
Keywords:
concrete filled steel tube columns, confinement effect, strength enhancement, steel tube, confining pressureDownloads
References
M. Johansson, "The efficiency of passive confinement in CFT columns," Steel and Composite Structures, vol. 2, no. 5, pp. 379–396, Oct. 2002. DOI: https://doi.org/10.12989/scs.2002.2.5.379
Z. Shan-Tong and M. Ruo-Yu, "Stress-Strain Relationship and Strength of Concrete Filled Tubes," presented at the Composite Construction in Steel and Concrete, Henniker, NH, USA, 1988, pp. 773–785.
M. D. O’Shea and R. Q. Bridge, "Design of Circular Thin-Walled Concrete Filled Steel Tubes," Journal of Structural Engineering, vol. 126, no. 11, pp. 1295–1303, Nov. 2000. DOI: https://doi.org/10.1061/(ASCE)0733-9445(2000)126:11(1295)
J. B. Mander, M. J. N. Priestley, and R. Park, "Theoretical Stress‐Strain Model for Confined Concrete," Journal of Structural Engineering, vol. 114, no. 8, pp. 1804–1826, Aug. 1988. DOI: https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
M. M. Attard and S. Setunge, "Stress-Strain Relationship of Confined and Unconfined Concrete," Materials Journal, vol. 93, no. 5, pp. 432–442, Sep. 1996. DOI: https://doi.org/10.14359/9847
K. A. S. Susantha, H. Ge, and T. Usami, "Uniaxial stress–strain relationship of concrete confined by various shaped steel tubes," Engineering Structures, vol. 23, no. 10, pp. 1331–1347, Oct. 2001. DOI: https://doi.org/10.1016/S0141-0296(01)00020-7
H.-T. Hu, C.-S. Huang, M.-H. Wu, and Y.-M. Wu, "Nonlinear Analysis of Axially Loaded Concrete-Filled Tube Columns with Confinement Effect," Journal of Structural Engineering, vol. 129, no. 10, pp. 1322–1329, Oct. 2003.
H.-T. Hu, C.-S. Huang, M.-H. Wu, and Y.-M. Wu, "Nonlinear Analysis of Axially Loaded Concrete-Filled Tube Columns with Confinement Effect," Journal of Structural Engineering, vol. 129, no. 10, pp. 1322–1329, Oct. 2003. DOI: https://doi.org/10.1061/(ASCE)0733-9445(2003)129:10(1322)
G. D. Hatzigeorgiou, "Numerical model for the behavior and capacity of circular CFT columns, Part I: Theory," Engineering Structures, vol. 30, no. 6, pp. 1573–1578, Jun. 2008. DOI: https://doi.org/10.1016/j.engstruct.2007.11.001
Q. Q. Liang and S. Fragomeni, "Nonlinear analysis of circular concrete-filled steel tubular short columns under axial loading," Journal of Constructional Steel Research, vol. 65, no. 12, pp. 2186–2196, Dec. 2009. DOI: https://doi.org/10.1016/j.jcsr.2009.06.015
F. Ding, Z. Yu, Y. Bai, and Y. Gong, "Elasto-plastic analysis of circular concrete-filled steel tube stub columns," Journal of Constructional Steel Research, vol. 67, no. 10, pp. 1567–1577, Oct. 2011. DOI: https://doi.org/10.1016/j.jcsr.2011.04.001
Eurocode 4, Design of Composite Steel and Concrete Structures, Part 1.1, General Rules and Rules for Buildings. Brussels, Belgium: CEN, 2004.
N. J. Gardner and E. R. Jacobson, "Structural Behavior of Concrete Filled Steel Tubes," Journal Proceedings, vol. 64, no. 7, pp. 404–413, Jul. 1967. DOI: https://doi.org/10.14359/7575
T. Yamamoto, J. Kawaguchi, and S. Morino, "Experimental Study of Scale Effects on the Compressive Behavior of Short Concrete-Filled Steel Tube Columns," in Composite Construction in Steel and Concrete IV Conference 2000, Apr. 2012, pp. 879–890.
J. Tang, S. Hino, I. Kuroda, and T. Ohta, "Modeling of Stress - Strain Relationships for Steel and Concrete in Concrete Filled Circular Steel Tubular Columns," Steel Construction Engineering, vol. 3, no. 11, pp. 35–46, 1996.
L.-H. Han, W. Li, and R. Bjorhovde, "Developments and advanced applications of concrete-filled steel tubular (CFST) structures: Members," Journal of Constructional Steel Research, vol. 100, pp. 211–228, Sep. 2014. DOI: https://doi.org/10.1016/j.jcsr.2014.04.016
S. Motoo and M. Kazuaki, "Experimental Study on Ultimate Behavior of Ultra-High-Strength Concrete-Filled Steel Pipe Shear-Bending Columns," Proceedings of the Department of Construction of the Architectural Institute of Japan, vol. 64, no. 520, pp. 133–140, 1999.
Q. Yu, Z. Tao, and Y.-X. Wu, "Experimental behaviour of high performance concrete-filled steel tubular columns," Thin-Walled Structures, vol. 46, no. 4, pp. 362–370, Apr. 2008. DOI: https://doi.org/10.1016/j.tws.2007.10.001
P. C. Nguyen, D. D. Pham, T. T. Tran, and T. Nghia-Nguyen, "Modified Numerical Modeling of Axially Loaded Concrete-Filled Steel Circular-Tube Columns," Engineering, Technology & Applied Science Research, vol. 11, no. 3, pp. 7094–7099, Jun. 2021. DOI: https://doi.org/10.48084/etasr.4157
A. N. Hassooni and S. R. A. Zaidee, "Behavior and Strength of Composite Columns under the Impact of Uniaxial Compression Loading," Engineering, Technology & Applied Science Research, vol. 12, no. 4, pp. 8843–8849, Aug. 2022. DOI: https://doi.org/10.48084/etasr.4753
Z. H. Abdulghafoor and H. A. Al-Baghdadi, "Static and Dynamic Behavior of Circularized Reinforced Concrete Columns Strengthened with Hybrid CFRP," Engineering, Technology & Applied Science Research, vol. 12, no. 5, pp. 9336–9341, Oct. 2022. DOI: https://doi.org/10.48084/etasr.5162
Downloads
How to Cite
License
Copyright (c) 2023 Hoang An Le
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.
