Flexural Strengthening of Prestressed Girders with Partially Damaged Strands Using Enhancement of Carbon Fiber Laminates by End Sheet Anchorages
Received: 23 April 2022 | Revised: 13 May 2022 | Accepted: 21 May 2022 | Online: 7 August 2022
Corresponding author: H. Q. Abbas
Abstract
This paper examines the impact of flexural strengthening on the percentage of damaged strands in internally unbonded tendons in partially prestressed concrete beams (0, 14.28%, and 28.57%) and the recovering conditions using CFRP composite longitudinal laminates at the soffit, and end anchorage U-wrap sheets to restore the original flexural capacity and mitigate the delamination of the soffit of longitudinal Carbon Fiber Reinforced Polymer (CFRP) laminates. The composition of the laminates and anchors affected the stress of the CFRP, the failure mode, and thus the behavior of the beam. The experimental results revealed that the usage of CFRP laminates has a considerable impact on strand strain, particularly when anchors are employed. The EB-CFRP laminates increased the flexural capacity by approximately 13%, which corresponds to strand damage of 14.28%, while flexural capacity increased by 9.3%, strand damage increased by 28.57% for members strengthened with laminates only, and around 21.58% and 16.85% for members reinforced with laminates and end anchorings. Quasi-experimental equations have been proposed to estimate the actual stress of untethered tendons considering the effect of CFRP laminates and final fixation winding.
Keywords:
CFRP laminates, debonding, post-tensioned girder, strand damage, unbonded strandDownloads
References
A. M. Al-Hilali, A. F. Izzet, and N. Oukaili, "Static Shear Strength of a Non-Prismatic Beam with Transverse Openings," Engineering, Technology & Applied Science Research, vol. 12, no. 2, pp. 8349–8353, Apr. 2022. DOI: https://doi.org/10.48084/etasr.4789
B. F. Abdulkareem, A. F. Izzet, and N. Oukaili, "Post-Fire Behavior of Non-Prismatic Beams with Multiple Rectangular Openings Monotonically Loaded," Engineering, Technology & Applied Science Research, vol. 11, no. 6, pp. 7763–7769, Dec. 2021. DOI: https://doi.org/10.48084/etasr.4488
H. M. Hekmet and A. F. Izzet, "Performance of Segmental Post-Τensioned Concrete Beams Exposed to High Fire Temperature," Engineering, Technology & Applied Science Research, vol. 9, no. 4, pp. 4440–4447, Aug. 2019. DOI: https://doi.org/10.48084/etasr.2864
G. Razaqpur and A. B. Mostafa, "C-Anchor for Strengthening the Connection between Adhesively Bonded Laminates and Concrete Substrates," Technologies, vol. 3, no. 4, pp. 238–258, Dec. 2015. DOI: https://doi.org/10.3390/technologies3040238
L. Nguyen-Minh et al., "Flexural-strengthening efficiency of cfrp sheets for unbonded post-tensioned concrete T-beams," Engineering Structures, vol. 166, pp. 1–15, Jul. 2018. DOI: https://doi.org/10.1016/j.engstruct.2018.03.065
ACI Committee 318, ACI CODE-318-19: Building Code Requirements for Structural Concrete and Commentary. Farmington Hills, MI, USA: ACI, 2019.
F. El Meski and M. Harajli, "Flexural Behavior of Unbonded Posttensioned Concrete Members Strengthened Using External FRP Composites," Journal of Composites for Construction, vol. 17, no. 2, pp. 197–207, Apr. 2013. DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000330
A. A. Abdulhameed et al., "The Behavior of Hybrid Fiber-Reinforced Concrete Elements: A New Stress-Strain Model Using an Evolutionary Approach," Applied Sciences, vol. 12, no. 4, Jan. 2022, Αρτ. Νο. 2245. DOI: https://doi.org/10.3390/app12042245
A. H. Al-Zuhairi, A. H. Al-Ahmed, A. A. Abdulhameed, and A. N. Hanoon, "Calibration of a New Concrete Damage Plasticity Theoretical Model Based on Experimental Parameters," Civil Engineering Journal, vol. 8, no. 2, pp. 225–237, Feb. 2022. DOI: https://doi.org/10.28991/CEJ-2022-08-02-03
A. H. Al-Zuhairi and A. I. Taj, "Effectiveness of Meso-Scale Approach in Modeling of Plain Concrete Beam," Journal of Engineering, vol. 24, no. 8, pp. 71–80, Jul. 2018. DOI: https://doi.org/10.31026/j.eng.2018.08.06
ACI Committee 440, ACI PRC-440.2-17: Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures. Farmington Hills, MI, USA: ACI, 2017.
A. Tam and F. N. Pannell, "The ultimate moment of resistance of unbonded partially prestressed reinforced concrete beams," Magazine of Concrete Research, vol. 28, no. 97, pp. 203–208, Dec. 1976. DOI: https://doi.org/10.1680/macr.1976.28.97.203
F. T. K. Au and J. S. Du, "Prediction of ultimate stress in unbonded prestressed tendons," Magazine of Concrete Research, vol. 56, no. 1, pp. 1–11, Feb. 2004. DOI: https://doi.org/10.1680/macr.56.1.1.36288
F. El Meski and M. Harajli, "Evaluation of the Flexural Response of CFRP-Strengthened Unbonded Posttensioned Members," Journal of Composites for Construction, vol. 19, no. 3, Jun. 2015, Art. no. 04014052. DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000516
A. J. Daraj and A. H. Al-Zuhairi, "The Combined Strengthening Effect of CFRP Wrapping and NSM CFRP Laminates on the Flexural Behavior of Post-Tensioning Concrete Girders Subjected to Partially Strand Damage," Engineering, Technology & Applied Science Research, vol. 12, no. 4, pp. 8856–8863, Aug. 2022.
Downloads
How to Cite
License
Copyright (c) 2022 H. Q. Abbas, A. H. Al‐Zuhairi
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.