The Optimization of Rotary Bending Die Process: Criteria for the Metal Sheet Angles and Springback Effects
Received: 23 November 2024 | Revised: 24 December 2024 and 2 January 2025 | Accepted: 4 January 2025 | Online: 2 February 2025
Corresponding author: Vu Duc Quang
Abstract
Rotary die bending enables the precise fabrication of sheet metal components across various bending angles, offering high dimensional accuracy, structural stability, and reduced springback. This study employs explicit and implicit numerical simulations using the Abaqus software to analyze the rotary die bending process and springback behavior of SUS304 stainless steel sheets. Five key criteria are investigated: desired angle post-springback (asi), springback factor (ksi), forming stress (Von Mises) at the required bending angle (Sr), residual stress (Von Mises) after springback (Sb), and equivalent plastic strain (PEEQ). These criteria enable accurate predictions of material behavior during rotary die bending, including elastic-plastic deformation and stress distribution. The insights gained support a more flexible design process, enhance the precision of sheet metal bending, and ensure that the final product meets the specified requirements. This research serves as a valuable reference for professionals working with sheet metal components made from various metals and bimetal sheets. Additionally, it informs strategies to mitigate or eliminate residual stress in bent parts, improving reliability and manufacturability.
Keywords:
rotary die bending, bending angle, SUS304 stainless steel sheet, springback, 3D numerical simulationDownloads
References
C. V. Nielsen and P. A. F. Martins, Metal Forming: Formability, Simulation, and Tool Design, London, England: Academic Press, 2021.
Schuler, Metal Forming Handbook, Berlin, Germany: Springer, 1998.
J. Hu, Z. Marciniak, and J. Duncan, Mechanics of Sheet Metal Forming, 2nd ed.Oxford, United Kingdom: Butterworth-Heinemann, 2002.
N. M. Dang, N. N. Huynh, and P. H. Duong, Sheet metal forming technology, 1st ed. Hanoi, Vietnam: Science and Technology Publishing House, 2006.
K. Lange, Handbook of metal forming, 1st ed. New York, USA: McGraw-Hill Inc, 1985.
Y. E. Ling, H. P. Lee, and B. T. Cheok, "Finite element analysis of springback in L-bending of sheet metal," Journal of Materials Processing Technology, vol. 168, no. 2, pp. 296–302, Sep. 2005.
W. Phanitwong and S. Thipprakmas, "Development of anew spring-back factor for a wiping die bending process," Materials & Design, vol. 89, pp. 749–758, Jan. 2016, https://doi.org/10.1016/j.matdes.2015.10.031.
K. Doungmarda and S. Thipprakmas, "A New Bending Force Formula for the V-Die Bending Process," Metals, vol. 13, no. 3, Mar. 2023, Art. no. 587.
T. Trzepieciński and H. G. Lemu, "Improving Prediction of Springback in Sheet Metal Forming Using Multilayer Perceptron-Based Genetic Algorithm," Materials, vol. 13, no. 14, Jan. 2020, Art. no. 3129.
C. Chen, J. Gong, Y. Chen, and J. Wang, "A prediction model for bending springback of AZM120 sheet metal and mechanical compensation of CNC automatic panel bender," The International Journal of Advanced Manufacturing Technology, vol. 116, no. 9, pp. 3325–3337, Oct. 2021.
H. Livatyali, S. E. Turan, F. Birol, and M. Türköz, "Experimental comparison of straight flanging and rotary die bending based on springback," The International Journal of Advanced Manufacturing Technology, vol. 120, no. 7, pp. 4373–4386, Jun. 2022.
S. Thipprakmas, "Spring-back factor applied for V-bending die design," Journal of Advanced Mechanical Design, Systems, and Manufacturing, vol. 14, no. 3, 2020, Art. no. JAMDSM0037.
C. Kella and P. K. Mallick, "Residual Stress Distribution in Aluminum/Polypropylene/Aluminum Sandwich Laminates in U-Channel Draw Bending," Journal of Materials Engineering and Performance, vol. 33, no. 15, pp. 7616–7625, Aug. 2024.
T. Trzepieciński, F. dell’Isola, and H. G. Lemu, "Multiphysics Modeling and Numerical Simulation in Computer-Aided Manufacturing Processes," Metals, vol. 11, no. 1, Jan. 2021, Art. no. 175.
D. Banabic, Sheet Metal Forming Processes: Constitutive Modelling and Numerical Simulation, New York, United States: Springer Science & Business Media, 2010.
H. G. Lemu and T. Trzepieciński, “Numerical and Experimental Study of Frictional Behavior in Bending Under Tension Test,” Journal of Mechanical Engineering, vol. 59, no. 1, pp. 41–49, Jan. 2013.
A. M. F. Pimentel, J. L. de Carvalho Martins Alves, N. M. de Seabra Merendeiro, and D. M. F. Vieira, "Comprehensive benchmark study of commercial sheet metal forming simulation softwares used in the automotive industry," International Journal of Material Forming, vol. 11, no. 6, pp. 879–899, Nov. 2018.
W. Liu, X. Zhang, and P. Hu, "Developments of multi-step simulations in sheet metal forming processes," The International Journal of Advanced Manufacturing Technology, vol. 93, no. 1, pp. 1379–1397, Oct. 2017.
M. A. Ablat and A. Qattawi, "Numerical simulation of sheet metal forming: a review," The International Journal of Advanced Manufacturing Technology, vol. 89, no. 1, pp. 1235–1250, Mar. 2017.
Q. V. Duc, D. D. Van, T. N. Dac, and Q. N. Huu, "Quality comparison of Y-shape joints by tube hydroforming with and without counterforce," EUREKA: Physics and Engineering, no. 4, pp. 46–56, Jul. 2022.
Q. D. Vu, T. D. Nguyen, H. V. Dang, and D. T. Phan, "Effect of loading paths on hydroforming ability of stepped hollow shaft components from double layer pipes," EUREKA: Physics and Engineering, no. 4, pp. 143–154, Jul. 2023.
X. Zhu, X. Wang, and H. Wu, "Calculation method and analysis of residual stress in the strip bending roller straightening process," Scientific Reports, vol. 14, no. 1, Apr. 2024, Art. no. 9149.
T.-D. Tran and P.-H. V. Nguyen, "Computation of Limit Loads for Bending Plates," Engineering, Technology & Applied Science Research, vol. 13, no. 2, pp. 10466–10470, Apr. 2023.
Downloads
How to Cite
License
Copyright (c) 2025 Quang Vu Duc

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.