Study of the Behavior of Water Droplets Under the Influence of a Uniform Electric Field on Conventional Polyethylene and on Crosslinked Polyethylene (XLPE) with MgO Nanoparticles Samples
It is well known that polyethylene (PE) and cross-linked polyethylene (XLPE) are suitable insulating materials for underground cables. Samples of PE and of XLPE with MgO nanoparticles were investigated regarding their flashover behaviour with a uniform electric field and water droplets of various conductivities. In the present paper, the effect of the mounting arrangement of the water drops on the value of the flashover voltage and the effect of the volume of dripping water on the flashover voltage were also studied. Surface damages were analyzed using Scanning Electron Microscopy (SEM) studies and the study of the nano-structure of the samples was studied using the SAXS system.
Keywords:polyethylene, cross-linked polyethylene, flashover, surface discharges, polymer nanocomposites
G. Chen, M. Hao, Z. Xu, A. Vaughan, J. Cao, H. Wang, ‘’Review of high voltage direct current cables’’, CSEE Journal of Power and Energy Systems, Vol. 1, No. 2, pp. 9-21, 2015 DOI: https://doi.org/10.17775/CSEEJPES.2015.00015
M. G. Danikas, R. Sarathi, P. Ramnalis, S. L. Nalmpantis, “Analysis of polymer surface modifications due to discharges initiated by water droplets under high electric fields”, World Academy of Science, Engineering and Technology, Vol. 38, pp. 905-910, 2009
M. S. Naidu, V. Kamaraju, High voltage engineering, Eds. Tata McGraw-Hill Publishing Co. Ltd., New Delhi, 2000
H. -J. Kloes, D. Koenig, M. G. Danikas, “Electrical surface discharges on wet polymer surfaces”, Proceedings of the 8th International Symposium of Gaseous Dielectrics, Virginia Beach, Virginia, USA, pp. 489-495, June 1998 DOI: https://doi.org/10.1007/978-1-4615-4899-7_65
K. Karakoulidis, M. G. Danikas, P. Rakitzis, “Deterioration phenomena on insulating surfaces due to water droplets”, Journal of Electrical Engineering, Vol. 56, pp. 169-175, 2005
M. G. Danikas, P. Rakitzis, K. Karakoulidis, “Study of parameters related to deterioration phenomena due to water droplets on polymeric surfaces”, Journal of Electrical Engineering, Vol. 57, No. 3, pp. 130–137, 2006
M. G. Danikas, R. Sarathi, P. Ramnalis, S. L. Nalmpantis, “Analysis of polymer surface modifications due to discharges initiated by water droplets under high electric fields”, Int. J. Electr. Power and Energy Syst. Eng., Vol. 3, No. 1, pp. 19-24, 2010
W. T. Starr, “Polymeric outdoor insulation”, IEEE Transactions on Electrical Insulation, Vol. 25, No. 1, pp. 125-136, 1990 DOI: https://doi.org/10.1109/14.45239
A. E. Vlastos, S. M. Gubanski, “Surface structural changes of naturally aged silicone and EPDM composite insulators”, IEEE Transactions on Power Delivery, Vol. 6, No. 2, pp. 888-900, 1991 DOI: https://doi.org/10.1109/61.131149
M. G. Danikas, “Polymer outdoor insulators”, Acta Electrotehnica Napocensis, Vol. 40, No. 1, pp. 3-10, 1999
M. G. Danikas, P. Ramnalis, R. Sarathi, “A study of the behaviour of water droplets on polymeric surfaces under the influence of electric fields in an inclined test arrangement”, Journal of Electrical Engineering, Vol. 60, No. 2, pp. 94-99, 2009
S. Feier-Iova, V. Hinrichsen, “Partial Discharge Inception Voltage of Water Drops on Insulating Surfaces Stressed by Electrical Field”, International Symposium on High Voltage Engineering, pp. 21-25, 2009 DOI: https://doi.org/10.1109/EIC.2009.5166318
M. Kozako, R. Kido, N. Fuse, Y. Ohki, T. Okamoto, “Difference in surface degradation due to partial discharges between polyamide nanocomposite and microcomposite”, IEEE Annual Report of Conference on Electrical Insulation and Dielectric Phenomena, pp. 398-401, 2004
M. Kozako, R. Kido, T. Imai, T. Ozaki, T. Shimizu, T. Tanaka, “Surface Roughness Change of Epoxy/TiO2 Nanocomposites due to Partial Discharges”, Proceedings of 2005 International Symposium on Electrical insulating Materials, pp. 661–664, Japan, 2005 DOI: https://doi.org/10.1109/ISEIM.2005.193456
J. K. Nelson, Dielectric polymer nanocomposites, Eds. Springer, Heidelberg, Germany, 2010 DOI: https://doi.org/10.1007/978-1-4419-1591-7
I. Plesa, P. V. Notingher, S. Schloegl, C. Sumereder, M. Muhr, “Properties of polymer composites used in high-voltage applications”, Polymers, Vol. 8, 2016 DOI: https://doi.org/10.3390/polym8050173
H. Schnablegger, Y. Singh, The SAXS Guide. Getting acquainted with the principles, Anton Paar GmbH, 2011
M. Jarvid, A. Johansson, R. Kroon, J. M. Bjuggren, H. Wutzel, V. Englund, S. Gubanski, M. R. Andersson, C. Müller, “A New Application Area for Fullerenes: Voltage Stabilizers for Power Cable Insulation,” Advanced Materials, Vol. 27, No. 5, pp. 897–902, 2015 DOI: https://doi.org/10.1002/adma.201404306
L. A. Utracki, “Clay-containing polymeric nanocomposites and their properties”, IEEE Electrical Insulation Magazine, Vol. 26, No. 4, pp. 6-15, 2010 DOI: https://doi.org/10.1109/MEI.2010.5511184
E. David, M. Frechette, “Polymer nanocomposites – Major conclusions and achievements reached so far”, IEEE Electrical Insulation Magazine, Vol. 29, No. 6, pp. 29-36, 2013 DOI: https://doi.org/10.1109/MEI.2013.6648751
E. A. Cherney, “Nanodielectrics applications–Today and tomorrow”, IEEE Electrical Insulation Magazine, Vol. 29, No. 6, pp. 59-65, 2013 DOI: https://doi.org/10.1109/MEI.2013.6648754
How to Cite
MetricsAbstract Views: 672
PDF Downloads: 275
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.