Improved Steel Beam-Column Connections in Industrial Structures
Beam-to-column connection is a rigid connection used in steel moment frames which acts as the main resisting system in structural design. Haunches with double beam section height at the eave, ridge and crane bracket are usually used to resist the large bending moment at the critical locations of the steel frames. Damper devices can be used as the main source of producing forces used to reduce the bending moment due to different static and dynamic loads. This study focuses on improving the steel beam-column connection with the proposed control system in the eave connection which can also be used under the bracket which supports crane beam in industrial buildings. The purpose of this study is to describe the development of the beam-column steel connection incorporating dampers installed to beam bottom flange to reduce the effect of applied load on the frame without the need to create haunches to make the connection design more efficient.
New Zealand Standard, AS/NZS 1170.2 (2002): Structural design actions, part 2: Wind actions, New Zealand Standard, 2002
K. Bayat, B. Shekatehband, “Seismic performance of beam to column connections with T-shaped slit damper”, Thin-Walled Structures, Vol. 141, pp. 28-46, 2019
P. P. Cordova, R. O. Hamburger, “Steel connections: Proprietary or public domain?”, Modern Steel Construction, Vol. 10, pp. 24-31, 2011
M. A. Farmani, M. Ghassemieh, “Steel beam-to-column connections equipped with SMA tendons and energy dissipating devices including shear tabs or web hourglass pins”, Journal of Constructional Steel Research, Vol. 135, pp. 30-48, 2017
S. Rambormozian, G. C. Clifton, G. A. MacRae, H. H. Khoo, “The sliding hinge joint: Final steps towards on optimum low damage seismic-resistant steel system”, Key Engineering Materials, Vol. 763, pp.751-760, 2018
T. J. Mander, G. W. Rodgers, J. G. Chase, J. B. Mander, G. A. MacRae, R. P. Dhakal, “Damage avoidance design steel beam-column moment connection using high-force-to-volume dissipators”, Journal of Structural Engineering, Vol. 135, No. 11, pp. 1390-1396, 2009
G. Machae, C. Clifton, “Low damage design of steel structures”, Steel Innovations 2013 Workshop, Christchurch, New Zealand, February 21-22, 2013
J. M. Fisher, Design guide 7 industrial buildings: roofs to anchor rods, American Institute of Steel Construction, 2005
C. Christopoulos, A. Filiatrault, C. M. Uang, B. Folz, “Posttensioned energy dissipating connections for moment-resisting steel frames”, Journal of Structural Engineering, Vol. 128, No. 9, pp. 1111-1120, 2002
S. R. Mirghaderi, M. D. Renani, “The rigid seismic connection of continuous beams to column”, Journal of Constructional Steel Research, Vol. 64, No. 12, pp. 1516-1529, 2008
J. M. Ricles, R. Sauce, M. M. Garlock, C. Zheo, “Posttensioned seismic-resistant connections for steel frames”, Journal of Structural Engineering, Vol. 127, No. 2, pp. 113-121, 2001
C. C. Chou, Y. C. Wang, J. H. Chen “Seismic design and behavior of post-tensioned steel connections including effects of a composite slab”, Engineering Structures, Vol. 30, No. 11, pp. 3014-3023, 2008
J. N. Arlekar, C. V. R. Murty, “Improved truss model for design of welded steel moment-resisting frame connections”, Journal of Structural Engineering, Vol. 130, No. 3, pp. 498-510, 2004
M. Wolski, J. M. Ricles, R. Sause, “Experimental study of a self-centering beam-column connection with bottom flange friction device”, Journal of Structural Engineering, Vol. 135, No. 5, pp. 479-488, 2009
Microstran Leading-edge Software for Structural Engineers, Product data sheet, Bentley
P. H. Sarjou, N. Shabakhty, “Effect of the improved pall friction damper on the seismic response of steel frames”, Engineering, Technology & Applied Science Research, Vol. 7, No. 4, pp. 1833-1837, 2017
G. Xu, M. Yamanari, “Performance of steel frame with linkage system under earthquake excitation”, Engineering, Technology & Applied Science Research, Vol. 9, No. 1, pp. 3795-3801, 2019
N. W. B. Girges, “An alternative system for eccentrically braced frames resisting lateral loads”, Engineering, Technology & Applied Science Research, Vol. 9, No. 3, pp. 4281-4286, 2019
A. Williams, Steel structural design for lateral and vertical forces, Mc Graw Hill, Second edition, 2016
S. T. Woolcook, S. Kitipornchai, M. A.Bradford, Design of portal frame building, Australian Institute of Steel Construction, Third edition, 1999
B. E. Gorenc, R. Tinyou, A. A. Syam, Steel designers’ handbook, UNSW Press, Eighth edition, 2012
PDF Downloads 51
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.
Most read articles by the same author(s)
- N. W. Bishay-Girges, An Alternative System for Eccentrically Braced Frames Resisting Lateral Loads , Engineering, Technology & Applied Science Research: Vol. 9 No. 3 (2019): June, 2019