Particle Crushing Effect on The Geotechnical Properties of Soil
Foundations are considered as the backbone of a structure. Most of the times, the foundation is laid on the soil. For the foundation design of any structure, we need to know beforehand the soil conditions such as shear strength and permeability. These parameters help us determine the bearing capacity of the soil. The soil conditions are determined by performing various laboratory tests such as shear box test or tri-axial shear test. However, we cannot design the foundation considering these data as the ground conditions will change once the loads are applied to the soil as there are some soil particles with angularity or sharp edges will break. Once they will break, soil conditions will not remain the same as they were before since the gradation will change. This work is carried out in order to know the impact soil breakage brings to the soil (granular soil). For this purpose, actual ground conditions were simulated in the laboratory by applying one-dimensional compression to soil particles for about 45 minutes in a Universal Testing Machine (UTM). Different crushing loads to soil particles were applied and the change in the soil behavior was monitored. It was found that due to particle breakage of soil, the engineering properties of sand altered. This research work aims to analyze the effect of particle breakage only in the case of sand.
Keywords:shear strength, permeability, shear box test, bearing capacity, crushing load
L. E. Vallejo, Z. Chik, “The evolution of crushing in granular materials and its effect on their mechanical Properties”, Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering, Millpress Science Publishers/IOS Press, 2006
M. L. Chen, G. W. Jian, B. Gan, W. H. Jiang, J. W. Zhou, “Physical and Compaction Properties of Granular Materials with Artificial Grading behind the Particle Size Distributions”, Advances in Materials Science and Engineering, Vol. 2018, pp. 1-20, 2018 DOI: https://doi.org/10.1155/2018/8093571
O. H. Al Hattamleh, H. H. Al-Deeky, M. N. Akhtar, “The Consequence of Particle Crushing in Engineering Properties of Granular Materials”, International Journal of Geosciences, Vol. 4, No. 7, pp. 1055-1060, 2013 DOI: https://doi.org/10.4236/ijg.2013.47099
T. A. Rousan, O. Al Hattamleh, R. A. Dwairi, “Effect of Inherent Anisotropy on Shear Strength Following Crushing of Natural Aqaba Subgrade Sand”, Jordan Journal of Civil Engineering, Vol. 5, No. 3, pp. 431-445, 2011
J. P. Hyslip, L. E. Vallejo, “Fractal analysis of the roughness and size distribution of granular materials”, Engineering Geology, Vol. 48, No. 3-4, pp. 231-244, 1997 DOI: https://doi.org/10.1016/S0013-7952(97)00046-X
J. Yang, X. D. Luo, “Exploring the relationship between critical state and particle shape for granular materials”, Journal of the Mechanics and Physics of Solids, Vol. 84, pp. 196-213, 2015 DOI: https://doi.org/10.1016/j.jmps.2015.08.001
B. B. Mandelbrot, The Fractal Geometry of Nature, W. H. Freeman and Company, 1983 DOI: https://doi.org/10.1119/1.13295
J. J. Wang, D. Zhao, Y. Liang, H. B. Wen, “Angle of repose of landslide debris deposits induced by 2008 Sichuan Earthquake”, Engineering Geology, Vol. 156, pp. 103-110, 2013 DOI: https://doi.org/10.1016/j.enggeo.2013.01.021
M. Rieu, G. Sposito, “Fractal Fragmentation, Soil Porosity, and Soil Water Properties: I. Theory”, Soil Science Society ofAmerica Journal, Vol. 55, No. 5, pp. 1231-1238, 1991 DOI: https://doi.org/10.2136/sssaj1991.03615995005500050006x
Z. Y. Ma, F. N. Dang, H. J. Liao, “Numerical study of the dynamic compaction of gravel soil ground using the discrete element”, Granular Matter, Vol. 16, No. 6, pp. 881-889, 2014 DOI: https://doi.org/10.1007/s10035-014-0529-x
G. Lumay, N. Vandewalle, “Compaction of anisotropic granular materials: experiments and simulations”, Physical Review E, Vol. 70, No. 5, 2004 DOI: https://doi.org/10.1103/PhysRevE.70.051314
M. A. Martin, M. Reyes, F. J. Taguas, “An entropy like parameter of particle size distributions as packing density index in complex granular media”, Granular Matter, Vol. 19, No. 1, p. 9, 2017 DOI: https://doi.org/10.1007/s10035-016-0692-3
W. Choi, Y. Son, J. Park, S. Noh, T. Bong, “An In-vestigation on Crushing and Particle Size Distribution Characterizes of Bottom Ash as Compaction Energy”, 2013 World of Coal Ash (WOCA) Conference, Lexington, USA, April 22-25, 2013
H. Shahnazari, R. Rezvani, “Effective Parameters for the Particle Breakage of Calcareous Sands: An Experi- mental Study”, Engineering Geology, Vol. 159, pp. 98-105, 2013 DOI: https://doi.org/10.1016/j.enggeo.2013.03.005
M. S. Lim, D. C. Wijeyesekera, A. Zainorabidin, I. Bakar, “The Effects of Particle Morphology (Shape and Sizes) Characteristics on its Engineering Behaviour and Sustainable Engineering Performance of Sand”, International Journal of Integrated Engineering, Vol. 4, No. 4, pp. 27-37, 2012
M. A. Martin, M. Reyes, F. J. Taguas, “Estimating soil bulk density with information metrics of soil texture”, Geoderma, Vol. 287, pp. 66-70, 2017 DOI: https://doi.org/10.1016/j.geoderma.2016.09.008
F. Casini, G. M. Viggiani, S. M. Springman, “Breakage of an artificial crushable material under loading”, Granular Matter, Vol. 15, No. 5, pp. 661-673, 2013 DOI: https://doi.org/10.1007/s10035-013-0432-x
How to Cite
MetricsAbstract Views: 520
PDF Downloads: 312
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.