Recent Eco-Friendly Developments in Personal Protective Clothing Materials for Reducing Plastic Pollution: A Review


  • A. H. Memon Institute of Environmental Engineering & Management, Mehran University of Engineering & Technology, Pakistan
  • M. H. Peerzada Department of Textile Engineering, Mehran University of Engineering and Technology, Pakistan
  • K. Muhammad Institute of Environmental Engineering and Management, Mehran University of Engineering and Technology, Pakistan
  • S. A. Memon Institute of Environmental Engineering & Management, Mehran University of Engineering & Technology, Pakistan
  • S. A. Mangi Department of Civil Engineering, Mehran University of Engineering and Technology, SZAB Campus, Pakistan
  • G. Mujtaba Energy and Environment Engineering Departement, Dawood University of Engineering and Technology, Pakistan
Volume: 9 | Issue: 2 | Pages: 4012-4018 | April 2019 |


Due to the industrialization increase in the 20th century, the level of hazards for public health and the demand for personnel protective clothing (PPC) have increased. The area of PPC has been steered to high tech equipment made from plastic-based materials, which are derived from non-renewable sources and have a long life cycle expanding from hundreds to thousands of years, after their end of useful life. This paper reviews the information related to conventional plastic-based fibers, their properties, advantages, disadvantages, and applications in the battlefield, industry, automobiles, etc. This paper provides a basis for the selection of natural fibers and the replacement of conventional plastic-based fibers to reduce the plastic content in protective clothing or other composites. A comparative analysis of technological, environmental, economic and legal aspects of plastic-based and environment-friendly natural fibers is presented. Natural fiber-based composite protective clothing is found to be environment-friendly and considered to have prospects for the future due to its comparative technological, environmental, economic and legal advantages.


eco-friendly fibers, conventional plastic fibers, protective clothing, plastic pollution, kevlar, UHMPE, Jute and Ramie


Download data is not yet available.


D. C. Wilson, L. Rodic, P. Modak, R. Soos, A. Carpintero, C. Velis, M. Iyer, O. Simonett, Global Waste Management Outlook, 2018

R. Geyer, J. R. Jambeck, K. L. Law, “Production, use, and the fate of all plastic ever made”, Science Advances, Vol. 3, No. 17, ArticleID e1700782, 2017 DOI:

V. Merino, D. Ayer, C. LeChevet, R. Larrivee, M. Ergastolo, L. Robledo, Plastic Pollution Primer and Action Toolkit, Earth Day Network, 2018

L. Mohammad, M. N. M. Ansari, G. Pua, M. Jawaid, M. S. Islam, “A Review of Natural Fiber Reinforced Polymer Composite and Its Applications”, International Journal of Polymer Science, Vol. 2015, Article ID 243947, 2015 DOI:

R. Shishoo, “Recent developments in materials for use in protective clothing“, International Journal of Clothing Science and Technology, Vol. 14, No. 3-4, pp. 201-215, 2002 DOI:

J. W. S. Hearle, “Fiber and fabrics for protective textiles”, in: Textiles for Protection, Woodhead Publishing & Textile Institute, 2005 DOI:

T. Nishino, K. Hirao, M. Kotera, K. Nakamae, H. Inagaki, “Kenaf reinforced biodegradable composite”, Composites Science and Technology, Vol. 63, No. 9, pp. 1281-1286, 2003 DOI:

Z. Salman, “Negative Impacts of Incineration-Based Waste-to-Energy Technology”, available at:, 2018

A. K. Lau, W. W. Cheuk, K. V. Lo, “Degradation of greenhouse twines derived from natural Fibres and biodegradable polymer during composting”, Journal of Environmental Management, Vol. 90, No. 1, pp. 668–671, 2008 DOI:

A. Sivan, “New perspectives in plastic biodegradation”, Current Opinion in Biotechnology, Vol. 22, No. 3, pp. 422-426, 2011 DOI:

M. Shimao, “Biodegradation of Plastics”, Current Opinion in Biotechnology, Vol. 12, No. 3, pp. 242–247, 2001 DOI:

O. Faruk, A. K. Beldzki, H. P. Fink, M. Sain, “Bio-composites reinforced with natural Fibres: 2000–2010”, Progress in Polymer Science, Vol. 37, pp. 1552–1596, 2012 DOI:

National Research Council, Division on Engineering and Physical Sciences, National Materials Advisory Board, Committee on High-Performance Structural Fibers for Advanced Polymer Matrix Composites, High-Performance Structural Fibres for Advanced Polymer Matrix Composites, National Academies Press, 2005

T. Jackson Singh, S. Samanta, “Characterization of Kevlar Fiber and its composites: A Review”, 4th International Conference on Materials Processing and Characterization, Materials Today Proceedings, Vol .2 No. 4-5, pp. 1381-1387, 2015 DOI:

P. N. B. Reis, J. A. M. Ferreira, J. D. M. Coata, M. J. Santos, “Fatigue Performance of Kevlar/Epoxy Composites with Filled Matrix by Cork Powder”, Fibres and Polymers, Vol. 13, No. 10, pp. 1292-1299, 2012 DOI:

T. Matsuo, “Fiber Materials for advance technical textile”, Textile Progress, Vol. 40, No. 2, pp. 87-121, 2008 DOI:

M. Kurtz, UHMWPE Biomaterial Handbook, Elsevier, 2015

B. Gua, L. J. Wang, P. Yin, B. G. Li, P. X. Li, “Ultra-high molecular weight polyethylene fiber–reinforced thermoplastic corn starch composite”, Journal of Thermoplastic Composite Materials, Vol. 30, No. 4, pp. 564-577, 2017 DOI:

S. Cao, H. Liu, S. Ge, G. Wu, “Mechanical and tribological Behaviours of UHMWPE composites filled with basalt Fibres”, Journal of Reinforced Plastics & Composites, Vol. 30, No. 4, pp. 347-355, 2011 DOI:

D. Das, A. K. Pradhan, R. Chattopadhyay, S. N. Singh, “Composite Nonwovens”, Textile Progress, Vol. 44, No. 1, pp. 1-84, 2012 DOI:

S. Adanur, Handbook of Industrial Textiles, Wellington Sears, 1995

T. Windhorst, G. Blount, “Carbon-Carbon Composites; A summary of recent developments and applications”, Material & Design, Vol. 18, No. 1, pp. 11-15, 1997 DOI:

C. Scarponi, “Carbon –Carbon composite in aerospace engineering”, in: Advance Composite Material for Aerospace. Engineering, Processing, Properties and Applications, pp. 385-412, Elsevier, 2016 DOI:

R. S. Blackburn, Biodegradable and Sustainable Fibres, The Textile Institute & Woodhead Publishing, 2005 DOI:

R. B. Armecin, F. G. Sinon, L. O. Moreno, “Abaca Fiber: A Renewable Bio-resource for Industrial Uses and Other Applications”, in: Biomass and Bioenergy-Applications, Springer, pp. 108-116, 2014 DOI:

M. Zimniewska, A Kicinska-Jakubowska, “Vegetable fibres sheet”, available at:, 2018

A. Rajan, T. E. Abraham,“Coir Fiber-process and Opportunities”, Journal of Natural Fibres, Vol. 3, No. 4, pp. 29-41, 2008 DOI:

C. R. Rajeesh, K. K Saju, “Methods and materials for reducing flammability behavior of coir fiber based Composite Boards: A Review”, Materials Today: Proceedings, Vol. 4, No. 9, pp. 9399-9407, 2017 DOI:

F. S. da Luz, S. N. Monteiro, E. S. Lima, E. Pereira Lima Jr, “Ballistic Application of Coir Fiber Reinforced Epoxy Composite in Multi-layered Armour”, Material Research, Vol. 20, No. 2, pp. 23-28, 2017 DOI:

P. Darsana, R. Abraham, A. Joseph, A. Jasheela, P. R. Binuraj, J. Sarma, “Development of Coir Fiber Cement Composite roofing tiles”, Procedia Technology, Vol. 24, pp. 169-178, 2016 DOI:

B. Lipp-Symonowicz, S. Sztajnowski, D. Wojciechowska, “New Commercial Fibres Called ‘Bamboo Fibres’-Their Structure and properties”, Fiber & Textiles in Eastern Europe, Vol. 19, No. 1, pp. 18-23, 2011

N. Erdumlu, B. Ozipek, “Investigation of Regenerated Bamboo Fibre and Yarn Characteristics”, Fibres & Textiles in Eastern Europe, Vol. 16, No. 4, pp. 43-47, 2008

T. Shito, K. Okubo, T. Fujii, “Development of eco-composites using natural bamboo Fibres and their mechanical properties”, in: WIT Transactions on The Built Environment, Vol. 59, 2002

M. Waite, “Sustainable Textiles: The Role of Bamboo and a Comparison of Bamboo Textile properties (Part II)”, Journal of Textile and Apparel Technology and Management, Vol. 6 No. 3, pp. 1-21, 2010

J. K. Huang, W. B. Young, “The mechanical, hygral, and interfacial strength of continuous bamboo fiber reinforced epoxy composites”, Composites Part B: Engineering, Vol. 166, pp. 272-283, 2018 DOI:

R. Bhanupratap, H. C. Chittappa, “Study of Tensile Behaviour by variation of Kevlar to Jute Fiber epoxy Hybrid Composite”, International Journal of Engineering Research & Technology, Vol. 6, No. 6, pp. 1039-1043, 2017 DOI:

S. Maity, K. Singha, D. Prasad Gon, P. Paul, M. Singha, “A Review on Jute Nonwovens: Manufacturing, Properties, and Applications”, International Journal of Textile Science, Vol. 1, No. 5, pp. 36-43, 2012

P. Ray, M. Datta, “Jute in Technical Textile”, 1st China International Bast Fibrous Plants and Textile Conference (China), 2004

E. Marsyahyo, Jamsari, H. S. B. Rochardjo, Soekrisno, “Preliminary Investigation on Bulletproof Panels Made from Ramie Fiber Reinforced Composites for NIJ Level II, IIA, and IV”, Journal of Industrial Textiles, Vol. 16, pp. 474-47, 2009 DOI:

T. Sen, H.N. Jagannatha Reddy, “Various Industrial Applications of Hemp, Kenaf, Flax and Ramie Natural Fibres”, International Journal of Innovations, Management, and Technology, Vol. 2, No. 3, pp. 192-198, 2011

J. Zhu, H. Zhu, J. Njuguna, H. Abhyyankar, “Recent Development of Flax Fibres and Their Reinforced Composites Based on Different Polymeric Matrices”, Materials (Basel), Vol. 6, No. 11, pp. 5171–5198, 2013 DOI:

NORAFIN, The Advantages of Flax Fibres in Composites, 2009

S. M. Kurtz, “UHWMPE in Total Joint Replacement and Medical Devices”, in: UHWMPE Bio Material Handbook, Elsevier, 2004

K. Abe, Y. Ozaki, “Comparison of useful terrestrial and aquatic plant species for removal of nitrogen and phosphorus from domestic water”, Soil Science and Plant Nutrition, Vol. 44, No. 4, pp. 599-607, 1998 DOI:

S. Sreenivasan, S. Sulaiman, B. T. H. T. Baharudin, M. K. A. Ariffin, K. Abdan, “Recent Developments of Kenaf Fiber Reinforced Thermoset Composites: A Review”, Material Research Innovations, Vol. 17, No. 2, pp. s2-s11, 2013 DOI:

H. Zhang, Z. Zhong, L. Feng, “Advances in the Performance and Application of Hemp Fiber”, International Journal of Simulation Systems, Science & Technology, Vol. 17, No. 9, Paper 18, 2018


How to Cite

A. H. Memon, M. H. Peerzada, K. Muhammad, S. A. Memon, S. A. Mangi, and G. Mujtaba, “Recent Eco-Friendly Developments in Personal Protective Clothing Materials for Reducing Plastic Pollution: A Review”, Eng. Technol. Appl. Sci. Res., vol. 9, no. 2, pp. 4012–4018, Apr. 2019.


Abstract Views: 1139
PDF Downloads: 487

Metrics Information
Bookmark and Share

Most read articles by the same author(s)

1 2 > >>