Performance Evaluation of Locally-Produced Waste Cooking Oil Biodiesel with Conventional Diesel Fuel

Authors

  • A. A. Khaskheli Department of Mechanical Engineering, Quaid-e-Awam University of Engineering, Science and Technology, Pakistan
  • G. D. Walasai Department of Mechanical Engineering, Quaid -e- Awam University of Engineering, Science and Technology, Nawabshah, Pakistan
  • A. S. Jamali Department of Mechanical Engineering, Quaid-e-Awam University of Engineering, Science and Technology, Pakistan
  • Q. B. Jamali Department of Mechanical Engineering, Quaid-e-Awam University of Engineering, Science and Technology, Pakistan
  • Z. A. Siyal Department of Energy & Environment Engineering, Quaid-e-Awam University of Engineering, Science & Technology, Pakistan
  • A. Mengal Department of Mechanical Engineering, Balochistan University of Engineering and Technology, Pakistan
Volume: 8 | Issue: 6 | Pages: 3521-3524 | December 2018 | https://doi.org/10.48084/etasr.2333

Abstract

Increasing environmental concerns forced us to look for cheaper, reliable and secure sources of energy. Fossil fuels like oil, coal, and natural gas are having limited supplies and are depleting fast. Both energy security and environmental concerns have resulted in inclination towards renewable energy sources. Biodiesel does not contain petroleum, but it can be blended with petro-diesel in various mix levels. This research investigated biodiesel produced by the use of cheap waste cooking oil, collected from the local market of Nawabshah, Pakistan. The collected waste oil was converted into biodiesel by trans-esterification process at PCSIR Laboratory, Karachi. The fuel samples were tested in a diesel engine test bed unit at the Thermodynamics Laboratory of Quaid-e-Awam University. Biodiesel blends were compared with the conventional diesel fuel. The comparative analysis of the performance parameters concluded that brake specific fuel consumption of B30 (biodiesel 30%+diesel 70%) mix was 6.9% higher than that of 100% diesel. The brake thermal efficiency of B30 decreased about 4.75% in comparison with conventional diesel.

Keywords:

biodiesel, WCO, BSFC, BTE, engine

Downloads

Download data is not yet available.

References

V. Cordero-Ravelo, J. Schallenberg-Rodriguez, “Biodiesel production as a solution to waste cooking oil (WCO) disposal. Will any type of WCO do for a transesterification process? A quality assessment”, Journal of Environmental Management, Vol. 228, pp. 117-129, 2018 DOI: https://doi.org/10.1016/j.jenvman.2018.08.106

M. Abe, S. Hirata, H. Komatsu, K. Yamagiwa, H. Tajima, “Thermodynamic selection of effective additives to improve the cloud point of biodiesel fuels”, Fuel Vol. 171, pp. 94–100, 2016 DOI: https://doi.org/10.1016/j.fuel.2015.12.053

Y. H. Teoh, H. H. Masjuki, M. A. Kalam, M. A. Amalina, H. G. How, “Impact of waste cooking oil biodiesel on performance, exhaust emission and combustion characteristics in a light-duty diesel engine”, SAE Technical Paper 2013-01-2679, 2013 DOI: https://doi.org/10.4271/2013-01-2679

A. M. A. Attia, A. E. Hassaneen, “Influence of diesel fuel blended with biodiesel produced from waster cooking oil on diesel engine performance”, Fuel Vol. 167, pp. 316-328, 2016 DOI: https://doi.org/10.1016/j.fuel.2015.11.064

A. E. Atabani, A. S. Silitonga, H. C. Ong, T. M. I. Mahlia, H. H. Masjuki, I. A. Badruddin, H. Fayaz, “Non-edible vegetable oils a critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics and engine performance and emissions production”, Renewable and Sustainable Energy Reviews, Vol. 18, pp. 211-245, 2013 DOI: https://doi.org/10.1016/j.rser.2012.10.013

S. H. Dhawane, T. Kumar, G. Halder, “Biodiesel synthesis from Hevea brasiliensis oil employing carbon supported heterogeneous catalyst: optimization by Taguchi method”, Renewable Energy, Vol. 89, pp. 506-514, 2016 DOI: https://doi.org/10.1016/j.renene.2015.12.027

S. H. Dhawane, A. P. Bora, T. Kumar, G. Halder, “Parametric optimization of biodiesel synthesis from rubber seed oil using iron doped carbon catalyst by Taguchi approach”, Renewable Energy, Vol. 105, pp. 616-624, 2017 DOI: https://doi.org/10.1016/j.renene.2016.12.096

A. Bokhari, L. F. Chuah, S. Yusup, J. J. klemes, R. N. M. Kamil, “Optimisation on pretreatment of rubber seed (Hevea brasiliensis) oil via esterification reaction in a hydrodynamic cavitation reactor”, Bioresource Technology, Vol. 199, pp. 414-422, 2016 DOI: https://doi.org/10.1016/j.biortech.2015.08.013

N. H. Abdullah, S. H. Hasan, N. R. M. Yusoff, “Biodiesel Production Based on Waste Cooking Oil (WCO)”, Internationals Journal of Materials Science and Engineering, Vol. 1, No. 2, pp. 94-99, 2013 DOI: https://doi.org/10.12720/ijmse.1.2.94-99

M. Mofijur, A. E. Atabani, H. H. Masjuki, M. A. Kalam, B. M. Masum, “A study on the effects of promising edible and non-edible biodiesel feedstocks on engine performance and emissions production: A comparative evaluation”, Renewable and Sustainable Energy Reviews, Vol. 23, pp. 391-404, 2013 DOI: https://doi.org/10.1016/j.rser.2013.03.009

A. E. Atabani, A. S. Silitonga, I. A. Badruddin, T. M. I. Mahlia, H. H. Masjuki, S. Mekhilef, “A comprehensive review on biodiesel as an alternative energy resource and its characteristics”, Renewable and Sustainable Energy Reviews, Vol. 16, No. 4, pp. 2070-2093, 2012 DOI: https://doi.org/10.1016/j.rser.2012.01.003

E. M. Shahid, Y. Jamal, A. N. Shah, N. Rumzan, M. Munsha, “Effect of Used Cooking Oil Methyl Ester on Compression Ignition Engine”, Journal of Quality and Technology Management, Vol. 8, pp. 91-104, 2012

V. G. Gude, G. E. Grant, “Biodiesel from waste cooking oils via direct sonication”, Applied Energy, Vol. 109, pp. 135-144, 2013 DOI: https://doi.org/10.1016/j.apenergy.2013.04.002

S. Photaworn, C. Tongurai, S. Kungsanunt, “Process development of two-step esterification plus catalyst solution recycling on waste vegetable oil possessing high free fatty acid”, Chemical Engineering and Processing: Process Intensification, Vol. 118, pp. 1-8, 2017 DOI: https://doi.org/10.1016/j.cep.2017.04.013

S. Nandi, “Performance of C.I Engine by Using Biodiesel-Mahua Oil”, American Journal of Engineering Research, Vol. 2, No. 1, pp. 22-47, 2013

M. Vijay Kumar, A. Veeresh Babu, P. Ravi Kumar, “The impacts on combustion, performance and emissions of biodiesel by using additives in direct injection diesel engine”, Alexandria Engineering Journal, Vol. 57, pp. 509-516, 2018 DOI: https://doi.org/10.1016/j.aej.2016.12.016

N. H. Abu-Hamdeh, K. A. Alnefaie, “A Comparative Study of Almond Biodiesel-Diesel Blends for Diesel Engine in Terms of Performance and Emissions, BioMed Research International, Vol. 2015, Article ID 529808, 2015 DOI: https://doi.org/10.1155/2015/529808

Downloads

How to Cite

[1]
A. A. Khaskheli, G. D. Walasai, A. S. Jamali, Q. B. Jamali, Z. A. Siyal, and A. Mengal, “Performance Evaluation of Locally-Produced Waste Cooking Oil Biodiesel with Conventional Diesel Fuel”, Eng. Technol. Appl. Sci. Res., vol. 8, no. 6, pp. 3521–3524, Dec. 2018.

Metrics

Abstract Views: 940
PDF Downloads: 410

Metrics Information

Most read articles by the same author(s)

<< < 1 2