A Review on Self Compacting Concrete with Cementitious Materials and Fibers

N. A. Memon, M. A. Memon, N. A. Lakho, F. A. Memon, M. A. Keerio, A. N. Memon

Abstract


Self-compacted concrete (SCC) is cast in the formwork without compaction and it fulfills the formwork due to its own weight. SCC is considered to have many advantages in comparison with conventional concrete like improved construction quality, faster construction activity, reduced cost etc. SCC is produced with the same ingredients of normal concrete. However, cementitious materials are also adopted to replace the cement content in SCC in order to use waste materials from industries and agricultural products. To further enhance the performance of SCC, different types of fibers are tried in order to produce fiber reinforced SCC. The fibers in the concrete bridge the cracks and diffuse the crack propagation which improves mechanical properties. In developed countries SCC has reasonable acceptance in construction industry but in developing countries like Pakistan has not gained acceptance. This paper is focused on undertaking a review of SCC with cement replacement and fiber reinforcement materials. The main objective of this paper is to compile the literature in order to understand the various properties of SCC in fresh and hardened state when these cement replacement materials and fibers are used.


Keywords


self-compacting concrete; cement replacing materials; fiber reinforcement

Full Text:

PDF

References


B. K. Rao, V. Ravindra, “Steel Fiber Reinforced Selfcompacting Concrete Incorporating Class F Fly Ash”, International Journal of Engineering Science and Technology, Vol. 2, No. 9, pp. 4936-4943, 2010

L. Coppola, T. Cerulli, D. Salvioni, “Sustainable development and durability of self-compacting concretes”, 8th CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, pp. 29-50, 2004

P. Aggarwal, R. Siddique, Y. Aggarwal, S. M. Gupta, “Self-compacting concrete-procedure for mix design”, Leonardo Electronic Journal of Practices and Technologies, Vol. 7, No. 12, pp. 15-24, 2008

M. Nehdi, M. Pardhan, S. Koshowski, “Durability of self-compacting concrete incorporating high-volume replacement composite cements”, Cement Concrete Research, Vol. 34, No. 11, pp. 2103-2112, 2004

A. S. El-Dieb, M. M. Reda Taha, “Flow characteristics and acceptance criteria of fiber-reinforced self-compacted concrete (FR-SCC)”, Construction and Building Materials, Vol. 27, pp. 585–596, 2012

H. Y. Wang, C. C. Lin, “A study of fresh and engineering properties of self-compacting high slag concrete (SCHSC)”, Construction and Building Materials, Vol. 42, pp. 132–136, 2013

M. M. Ranjbar, R. Madandoust, S. Y. Mousavi, S. Yosefi, “Effects of natural zeolite on the fresh and hardened properties of self-compacted concrete”, Construction and Building Materials, Vol. 47, pp. 806–813, 2013

R. Madandoust, S. Y. Mousavi, “Fresh and hardened properties of self-compacting concrete containing metakaolin”, Construction and Building Materials, Vol. 35, pp. 752–760, 2012

K. B. Najim, I. Al-Jumaily, A. M. Atea, “Characterization of sustainable high performance/self-compacting concrete produced using CKD as a cement replacement material”, Construction and Building Materials, Vol. 103, pp. 123–129, 2016

I. R. Viacava, A. A. de Cea, G. R. de Sensale, “Self-compacting concrete of medium characteristic strength”, Construction and Building Materials, Vol. 30, pp. 776–782, 2012

M. B. Vanjare, S. H. Mahure, “Experimental Investigation On Self Compacting Concrete Using Cement Kiln Dust”, International Journal of Engineering Research & Technology, Vol. 2, No. 1, pp. 1488-1492, 2013

K. S. Shobana, R. Gobinath, V. Ramachandran, B. Sundarapandi, P. Karuthapandi, S. Jeeva, A. Dhinesh, R. Manoj Kumar, M. Subramanian, “Preliminary study of Self Compacting Concrete by adding Silica Fume- A review paper”, International Journal of Engineering Research & Technology, Vol. 2, No. 11, pp. 1293-1304, 2013

N. Phathak, R. Siddique, “Properties of self-compacting concrete containing fly ash subjected to elevated temperatures”, Construction and Building Materials, Vol. 30, pp. 274-280, 2012

A. Dinesh, S. Harini, J. P. Jeba, J. Jincy, J. Shagufta, “Experimental study on self compacting concrete”, International Journal of Engineering Sciences & Research Technology, Vol. 6, No. 3, pp. 42-50, 2017

M. Jalal, A. Pouladkhan, O. F. Harandi, D. Jafari, “Comparative study on effects of Class F fly ash, nano silica and silica fume on properties of high performance self compacting concrete”, Construction and Building Materials, Vol. 94, pp. 90–104, 2015

H. Y. Leung, J. Kim, A. Nadeem, J. Jaganathan, M. P. Anwar, “Sorptivity of self-compacting concrete containing fly ash and silica fume”, Construction and Building Materials, Vol. 113, pp. 369–375, 2016

M. F. Nuruddin, N. M. Azmee, C. K. Yung, “Effect of fire flame exposure on ductile self-compacting concrete (DSCC) blended with MIRHA and fly ash”, Construction and Building Materials, Vol. 50, pp. 388–393, 2014

M. K. Mohammed, A. R. Dawson, N. H. Thom, “Production, microstructure and hydration of sustainable self-compacting concrete with different types of filler”, Construction and Building Materials, Vol. 49, pp. 84–92, 2013

D. Raharjo, A. Subakti, Tavio, “Mixed Concrete Optimization Using Fly Ash, Silica Fume and Iron Slag on the SCC’s Compressive Strength”, Procedia Engineering, Vol. 54, pp. 827–839, 2013

M. Tennich, A. Kallel, M. B. Ouezdou, “Incorporation of fillers from marble and tile wastes in the composition of self-compacting concretes”, Construction and Building Materials, Vol. 91, pp. 65–70, 2015

A. El Mir, S. G. Nehme, “Utilization of industrial waste perlite powder in self-compacting Concrete”, Journal of Cleaner Production, Vol. 156, pp. 507-517, 2017

S. S. Vivek, G. Dhinakaran, “Fresh and hardened properties of binary blend high strength self compacting concrete”, Engineering Science and Technology, an International Journal, Vol. 20, pp. 1173–1179, 2017

H. A. Nguyen, T. P. Chang, J. Y. Shih, H. S. Djayaprabha, “Enhancement of low-cement self-compacting concrete with dolomite Powder”, Construction and Building Materials, Vol. 161, pp. 539–546, 2018

R. Sharma, R. A. Khan, “Influence of Copper Slag and Metakaolin on the Durability of Self Compacting Concrete”, Journal of Cleaner Production, Vol. 171, pp. 1171-1186, 2018

V. Kannan, “Strength and durability performance of self compacting concrete containing self-combusted rice husk ash and metakaolin”, Construction and Building Materials, Vol. 160, pp. 169–179, 2018

B. Alsubari, P. Shafigh, Z. Ibrahim, M. F. Alnahhal, M. Z. Jumaat, “Properties of eco-friendly self-compacting concrete containing modified treated palm oil fuel ash”, Construction and Building Materials, Vol. 158, pp. 742–754, 2018

M. Gholhaki, A. kheyroddin, M. Hajforoush, M. Kazemi, “An investigation on the fresh and hardened properties of self-compacting concrete incorporating magnetic water with various pozzolanic materials”, Construction and Building Materials, Vol. 158, pp. 173–180, 2018

S. Iqbal, A. Ali, K. Holschemacher, T. A. Bier, “Mechanical properties of steel fiber reinforced high strength lightweight self-compacting concrete (SHLSCC)”, Construction and Building Materials, Vol. 98, pp. 325–333, 2015

T. M. Grabois, G. C. Cordeiro, R. D. Toledo Filho, “Fresh and hardened-state properties of self-compacting lightweight concrete reinforced with steel fibers”, Construction and Building Materials, Vol. 104, pp. 284–292, 2016

M. Mastali, A. Dalvand, “Use of silica fume and recycled steel fibers in self-compacting concrete (SCC)”, Construction and Building Materials, Vol. 125, pp. 196-209, 2016

M. Pajka, T. Ponikiewski, “Experimental investigation on hybrid steel fibers reinforced self-compacting concrete under flexure”, Procedia Engineering, Vol. 193, pp. 218–225, 2017

M. Pajak, “Investigation on Flexural Properties of Hybrid Fibre ReinforcedSelf-Compacting Concrete”, Procedia Engineering, Vol. 161, pp. 121–126, 2016

P. T. S. Sheril “Self Compacting Concrete Using Fly Ash and Glass Fibre”, International Journal of Engineering Research &Technology, Vol. 2, No. 9, pp. 374-376, 2013

A. I. Al-Hadithi, N. N. Hilal, “The possibility of enhancing some properties of self-compacting concrete by adding waste plastic fibers”, Journal of Building Engineering, Vol. 8, pp. 20-28, 2016

T. Ponikiewski, J. Katzer, “Properties of fresh SCC mix reinforced by different types of steel and polymer fibre”, Construction and Building Materials, Vol. 62, pp. 96-101, 2014

A. M. Diab, A. E. M. A. Elmoaty, M. R. Tag Eldin, “Slant shear bond strength between self compacting concrete and old Concrete”, Construction and Building Materials, Vol. 130, pp. 73-82, 2016

K. Aarthi, K. Arunachalam, “Durability Studies on Fibre Reinforced Self Compacting Concrete with Sustainable Wastes”, Journal of Cleaner Production, Vol. 174, pp. 247-255, 2017

M. A. da Silva, M. Pepe, R. G. M. de Andrade, M. S. Pfeil, R. D. T. Filho, “Rheological and mechanical behavior of High Strength Steel Fiber-River Gravel Self Compacting Concrete”, Construction and Building Materials, Vol. 150, pp. 606–618, 2017

R. Siddique, “Compressive strength, water absorption, sorptivity, abrasion resistance and permeability of self-compacting concrete containing coal bottom ash”, Construction and Building Materials, Vol. 47, pp. 1444–1450, 2013

R. Sharma, R. A. Khan, “Durability assessment of self compacting concrete incorporating copper slag as fine aggregates”, Construction and Building Materials, Vol. 155, pp. 617–629, 2017

S. M. Hama, N. N. Hilal, “Fresh properties of self-compacting concrete with plastic waste as partial replacement of sand”, International Journal of Sustainable Built Environment, Vol. 6, No. 2, pp. 299-308, 2017

H. L. Muttashar, M. A. M. Ariffin, M. N. Hussein, M. W. Hussin, S. Bin Ishaq, “Self-Compacting Geopolymer Concrete With Spend Garnet As Sand Replacement”, Journal of Building Engineering, Vol. 15, pp. 85-94, 2018

A. Saand, M. A. Keerio, D. K. Bangwar, “Effect of Soorh Metakaolin on Concrete Compressive Strength and Durability”, Engineering Technology & Applied Science Research, Vol. 7, No. 6, pp. 2210-2214, 2017




eISSN: 1792-8036     pISSN: 2241-4487