This is a preview and has not been published. View submission

Droplet Distributions and Electric Fields on the Angled Railway Composite Insulator

Authors

  • Chorphaka Plaengpraphan Department of Electrical Engineering, Faculty of Engineering, Rajamangala University of Technology Thanyaburi, Pathumthani, Thailand https://orcid.org/0009-0007-1160-1193
  • Nutthaphong Tanthanuch Department of Electrical and Computer Engineering, Thammasat School of Engineering, Faculty of Engineering, Thammasat University, Pathumthani, Thailand https://orcid.org/0000-0001-8000-4148
  • Khanissorn Thongchuer Department of Electrical Engineering, Faculty of Engineering, Rajamangala University of Technology Thanyaburi, Pathumthani, Thailand https://orcid.org/0009-0003-9258-1243
  • Pathomphorn Chueachan Department of Electrical Engineering, Faculty of Engineering, Rajamangala University of Technology Thanyaburi, Pathumthani, Thailand https://orcid.org/0009-0004-9980-5702
Volume: 15 | Issue: 4 | Pages: 25140-25149 | August 2025 | https://doi.org/10.48084/etasr.11487

Received: 17 April 2025 | Revised: 20 May 2025 | Accepted: 1 June 2025 | Online: 24 June 2025


Corresponding author: Nutthaphong Tanthanuch

Abstract

Composite insulators in railway systems are often installed at inclined angles, supported by cantilevers positioned relative to the railway masts and overhead line configurations. These inclinations significantly influence droplet deposition patterns, self-cleaning performance, and the distortion of electric field distribution. Such distortions can alter the mechanical and electrical properties of the insulators, potentially impacting electrical resistance, discharge activity, and the risk of flashover. This study investigates the electric field distribution of 25 kV composite railway insulators under clean and wet conditions. Experiments included artificial rain sprayed onto insulators at various orientations, captured via imaging, alongside simulations using Finite Element Analysis software. Results revealed that insulator orientation affects water droplet distribution and self-cleaning performance. Horizontal insulators exhibited superior self-cleaning efficiency, with droplets moving downward due to gravity and angle. Inclined insulators displayed acute and obtuse contact angles, with skewed ellipsoid droplets creating non-uniform electric fields and intensities concentrated at droplet edges. In contrast, horizontal insulators maintained more symmetric field distributions. Despite these differences, the maximum electric field intensities occurred near end fittings and remained below the critical value for corona initiation. These findings highlight the importance of insulator orientation in optimizing performance and mitigating risks associated with wet conditions.

Keywords:

inclined insulator, water droplets, electric field, self-cleaning performance, railway systems

Downloads

Download data is not yet available.

References

B. Subba Reddy and P. C. Ramamurthy, "Analysis of in-service composite insulators used in overhead railway traction," Engineering Failure Analysis, vol. 108, Jan. 2020, Art. no. 104227.

S. Venkataraman and B. Gunasekaran, "Case Study on Using Different Insulating Materials for Indian Railways Network, Performance Analysis of in-Service Composite Insulators & Recommendations for the Future," in 2019 International Conference on High Voltage Engineering and Technology, Hyderabad, India, 2019, pp. 1–5.

C. Gui and C. Baojiang, "Research on the wind-resistant structure of composite insulators for overhead contact system cantilever used based on fluid-structure interaction method," in 2016 IEEE International Conference on High Voltage Engineering and Application, Chengdu, China, 2016, pp. 1–4.

Y. Yang et al., "Aging Performance Evaluation of Composite Insulators for EHV Transmission Line," in 2020 IEEE 4th Conference on Energy Internet and Energy System Integration, Wuhan, China, 2020, pp. 3356–3360.

M. Dimitropoulou, D. Pylarinos, K. Siderakis, E. Thalassinakis, and M. Danikas, "Comparative Investigation of Pollution Accumulation and Natural Cleaning for Different HV Insulators," Engineering, Technology & Applied Science Research, vol. 5, no. 2, pp. 764–774, Apr. 2015.

P. Agüero-Barrantes and A. Hain, "Structural Performance of Porcelain Insulators in Overhead Railway Power Systems: Experimental Evaluations and Findings," Infrastructures, vol. 9, no. 8, Aug. 2024, Art. no. 138.

W. Bretuj, J. Fleszynski, and K. Wieczorek, "Influence of non-ceramic insulators’ shed inclination on their long-term behaviour in cyclic rain and fog conditions," in 2007 IEEE International Conference on Solid Dielectrics, Winchester, UK, 2007, pp. 126–129.

G. Satheesh, B. Basavaraja, and P. M. Nirgude, "Electric Field Simulation Around Contaminated SIR Insulators Using MATLAB," Engineering, Technology & Applied Science Research, vol. 8, no. 1, pp. 2542–2545, Feb. 2018.

M. K. Hussain and B. M. Alshadeedi, "Optimal design of high voltage composite insulators with grading rings in different configurations," Electric Power Systems Research, vol. 221, Aug. 2023, Art. no. 109493.

C. Song, Q. Chen, X. Wang, L. Wen, and T. Zheng, "Deformation and motion behavior of droplets in a non-uniform electric field," in 2015 IEEE 11th International Conference on the Properties and Applications of Dielectric Materials, Sydney, Australia, 2015, pp. 652–655.

S. Benharat, S. Bouazabia, and A. Haddad, "A study of the behavior of water droplets under the influence of non-uniform electric field in silicon rubber," in 2017 5th International Conference on Electrical Engineering - Boumerdes, Boumerdes, Algeria, 2017, pp. 1–4.

B. Sarang, V. Lakdawala, and P. Basappa, "Electric field calculations on a high voltage insulator under wet conditions," in 2009 IEEE Electrical Insulation Conference, Montreal, Canada, 2009, pp. 86–90.

W. Que and S. A. Sebo, "Electric field and potential distributions along non-ceramic insulators with water droplets," in Proceedings: Electrical Insulation Conference and Electrical Manufacturing and Coil Winding Conference (Cat. No.01CH37264), Cincinnati, OH, USA, 2001, pp. 441–444.

M. H. Nazemi and V. Hinrichsen, "Experimental investigations on water droplet oscillation and partial discharge inception voltage on polymeric insulating surfaces under the influence of AC electric field stress," IEEE Transactions on Dielectrics and Electrical Insulation, vol. 20, no. 2, pp. 443–453, Apr. 2013.

J. de Gabrielle and K. L. Wong, "Electromechanical effect on water droplets under AC high voltage," in 2013 Australasian Universities Power Engineering Conference, Hobart, Australia, 2013, pp. 1–6.

X. Zhang and S. M. Rowland, "Modelling of dry-band discharge events on insulation surfaces," in 2010 IEEE International Symposium on Electrical Insulation, San Diego, CA, USA, 2010, pp. 1–5.

Y. Zhu, S. Xu, and Y. Li, "Influence of Moist Environment on Aging Performance of Energized Silicone Rubber Used for Outdoor Insulation," IEEE Access, vol. 7, pp. 174932–174939, 2019.

M.-R. Halloum, B. S. Reddy, and G. N. Reddy, "Failure analysis of field-aged polymeric outdoor insulators and performance enhancement for electric stress using nonlinear field grading composites," Electrical Engineering, vol. 106, no. 2, pp. 1147–1161, Apr. 2024.

D. A. Swift, "Flashover of an insulator surface in air due to polluted water droplets," in Proceedings of 1994 4th International Conference on Properties and Applications of Dielectric Materials, Brisbane, Australia, 1994, pp. 550–553.

K. Patel and B. R. Parekh, "Prediction of flashover of silicone rubber insulator under different contaminated surface conditions," in 2013 IEEE 1st International Conference on Condition Assessment Techniques in Electrical Systems, Kolkata, India, 2013, pp. 358–361.

A. A. Salem et al., "Pollution Flashover Voltage of Transmission Line Insulators: Systematic Review of Experimental Works," IEEE Access, vol. 10, pp. 10416–10444, 2022.

N. Harid, A. Nekeb, H. Griffiths, and A. Haddad, "Flashover characteristics of polluted silicone rubber insulators exposed to artificial UV irradiation," in 2014 IEEE Electrical Insulation Conference, Philadelphia, PA, USA, 2014, pp. 440–444.

High-voltage test techniques. Part 1, General definitions and test requirements, IEC 60060-1, Sep. 2010.

H. P. Shrimathi, M. Mondal, and P. Mishra, "Simulation based electric stress estimation on silicone rubber polymeric insulators under multi-environmental conditions," Electric Power Systems Research, vol. 214, no. A, Jan. 2023, Art. no. 108840.

M.-R. Halloum and B. S. Reddy, "Investigations on the Failure of In-Service 400-kV Composite Insulator," IEEE Transactions on Dielectrics and Electrical Insulation, vol. 30, no. 6, pp. 2769–2778, Dec. 2023.

A. Nekeb, "Effect of some of climatic conditions in the performance of outdoor HV silicone rubber insulators," Ph.D. dissertation, School of Engineering, Cardiff University, Cardiff, UK, 2014.

Guidance on the measurement of hydrophobicity of insulator surfaces, IEC TS 62073, Feb. 2016.

P. D. Ravazzoli, I. Cuellar, A. G. González, and J. A. Diez, "Contact-angle-hysteresis effects on a drop sitting on an incline plane," Physical Review E, vol. 99, no. 4, Apr. 2019, Art. no. 043105.

C. D. Tourreil, E. Brocard, and V. Sklenicka, Use of corona rings to control the electrical field along transmission line composite insulators - Technical Brochures. Paris, France: CIGRE, 2005.

H. Gao, Z. Jia, Y. Mao, Z. Guan, and L. Wang, "Effect of Hydrophobicity on Electric Field Distribution and Discharges Along Various Wetted Hydrophobic Surfaces," IEEE Transactions on Dielectrics and Electrical Insulation, vol. 15, no. 2, pp. 435–443, Apr. 2008.

M. Bouhaouche, A. Mekhaldi, and M. Teguar, "Composite Insulators in a 400 kV AC Line in Algeria for Improving Electric Field Distribution," in 2018 International Conference on Electrical Sciences and Technologies in Maghreb, Algiers, Algeria, 2018, pp. 1–5.

Y. Li et al., "Effect of Water Droplets on the Corona Discharge Characteristics of Composite Insulators in Arid Areas," in 2019 2nd International Conference on Electrical Materials and Power Equipment, Guangzhou, China, 2019, pp. 467–472.

S. H. Meetiyagoda, R. W. N. W. M. R. O. K. B. Galagoda, T. D. T. L. Dissanayake, M. A. R. M. Fernando, and W. L. Abeygunasekara, "Electric Field Analyses on High Voltage Insulator Surfaces Under Different Water Droplet Behaviors," in 2023 IEEE 17th International Conference on Industrial and Information Systems, Peradeniya, Sri Lanka, 2023, pp. 1–6.

I. A. Joneidi, A. A. S. Akmal, and H. Mohseni, "Electric Field Distribution under Water Droplet and Effect of Thickness and Conductivity of Pollution Layer on Polymer Insulators Using Finite Element Method," International Journal of Computer and Electrical Engineering, vol. 5, no. 2, pp. 266–270, Apr. 2013.

D. Windmar, "Water drop initiated discharges in air," Ph.D. dissertation, Uppsala University, Uppsala, Sweden, 1994.

M. H. Nazemi and V. Hinrichsen, "Partial discharge inception electric field strength of water droplets on polymeric insulating surfaces," IEEE Transactions on Dielectrics and Electrical Insulation, vol. 22, no. 2, pp. 1088–1096, Apr. 2015.

Downloads

How to Cite

[1]
Plaengpraphan, C., Tanthanuch, N., Thongchuer, K. and Chueachan, P. 2025. Droplet Distributions and Electric Fields on the Angled Railway Composite Insulator. Engineering, Technology & Applied Science Research. 15, 4 (Aug. 2025), 25140–25149. DOI:https://doi.org/10.48084/etasr.11487.

Metrics

Abstract Views: 28
PDF Downloads: 19

Metrics Information

License

Copyright (c) 2025 Chorphaka Plaengpraphan, Nutthaphong Tanthanuch, Khanissorn Thongchuer, Pathomphorn Chueachan

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.